Discontinued Inhalater INH05/5S/6

Vitolo

Vaporist
Because the Inhalater was based on portability, and less fragility.
It was an innovation (and still is) in the use of polymide, for heat applications.
It is rough to think retrospectively ... to ask "why", when it will accomplish no change in the present. (there is no need to understand "why")
It is a vape with a polymide capsule, for which a glass tube has been created for enthusiasts.:tup:
 

poonman

Well-Known Member
I need some clarification @Inhalater .

I thought it was a glass ' capsule ' to switch from the polymide capsules .
The herb would sit in and cook in the glass capsule . Now it sounds like it's
a glass tube/stem added to the mouthpiece , to provide a glass air path .
 

Inhalater

Well-Known Member
Manufacturer
Yes exactly. Everything is incased in glass for enthusiasts; heating and vapour path.

CLEAR%20QUARTZ%20GLASS%20TUBE%20%281%29.JPG
 

Edward Hyde

Well-Known Member
what holds the material from going in your mouth when u inhale from the glass capsules?
 
Edward Hyde,

Inhalater

Well-Known Member
Manufacturer
Stainless steel filter screen (not shown)

Thermal properties and thickness of glass make the heat travel a little farther up toward the lips. This is the reason why glass capsules are a longuer and do not fit under the cap.
 
Last edited:

Kief

Medicated
How many of those glass capsules do we get for $30 (price on indiegogo) or $25 (price on Massdrop) ??? Those look like they should retail for about $5 each.
 

toros23

Well-Known Member
I have supported INH for a while now but the $30 price tag on these glass capsules really puts me off. I was planning to add one to my 05 order but I finally decided that the price is way too excessive for what you actually get.
 

Starless

And bible black
Whoa and I thought the Vapexnails were overpriced at $25, which seems to be a much more customized device. I'm guessing this glass is bulletproof? :lol:Hopefully that price goes down a bit in the future, cause I'm looking forward to this vape.
 
Starless,

Inhalater

Well-Known Member
Manufacturer
We will be shipping 3 glass capsules for 30$.

Tight tolerancing is required to make the best of the technology and assure no damage to the Inhalater. Stock glass tubes for another purpose are unlikely to replace adequately the genuine component.
 

toros23

Well-Known Member
We will be shipping 3 glass capsules for 30$.

Tight tolerancing is required to make the best of the technology and assure no damage to the Inhalater. Stock glass tubes for another purpose are unlikely to replace adequately the genuine component.


Whoa, now that's more like it!! Will be adding a pack to my order now, thanks!
 

Edward Hyde

Well-Known Member
We will be shipping 3 glass capsules for 30$.

Tight tolerancing is required to make the best of the technology and assure no damage to the Inhalater. Stock glass tubes for another purpose are unlikely to replace adequately the genuine component.


so fred since i payed 120 $ for capsules how many glass capsules are you sending me?12?
 
Edward Hyde,

Kief

Medicated
We will be shipping 3 glass capsules for 30$.

Tight tolerancing is required to make the best of the technology and assure no damage to the Inhalater. Stock glass tubes for another purpose are unlikely to replace adequately the genuine component.
I would have backed the campaign if I knew that, but I still think that's a bit high. These are just short tubes with a pinch in the middle. I can get a Solo stem for $11.05 shipped and I'd guess that there's about 3 times the glass and labor put into it.

I would prefer to have a glass screen or some sort of rim to hold a SS screen and I'd gladly pay $10-15 for it. A cheaper option would be just a strait tube with a SS basket screen like the E-Nano's Adjust-a-Bowl. From my experience with all of these styles, I think you could see better results than with your pinch design... I do with other vapes.
so fried since i payed 120 $ for capsules how many glass capsules are you sending me?12?
Wow, too bad this wasn't cleared up sooner.
 

cawshook

Solod out.
I would have backed the campaign if I knew that, but I still think that's a bit high. These are just short tubes with a pinch in the middle. I can get a Solo stem for $11.05 shipped and I'd guess that there's about 3 times the glass and labor put into it.

I would prefer to have a glass screen or some sort of rim to hold a SS screen and I'd gladly pay $10-15 for it. A cheaper option would be just a strait tube with a SS basket screen like the E-Nano's Adjust-a-Bowl. From my experience with all of these styles, I think you could see better results than with your pinch design... I do with other vapes.

Wow, too bad this wasn't cleared up sooner.
Why would it make a difference if its a pinch, rim or just straight though?
 
cawshook,

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Why would it make a difference if its a pinch, rim or just straight though?
Seems more money can be charged for an item simply because it hasn't been seen before, and because it becomes exclusive and proprietary. Maybe understandable if the middle-pinch design creates a venturi effect or some-such that enhances output. :peace:
 

Inhalater

Well-Known Member
Manufacturer
The pinch design is simple to manufacture and adds the least thermal mass.

An item that has not been seen before cost more to produce because it needs to be invented; in this case, manufacturing to the precise tolerances for optimal operation require time and effort.
 

exit

Well-Known Member
The pinch design is simple to manufacture and adds the least thermal mass.

An item that has not been seen before cost more to produce because it needs to be invented; in this case, manufacturing to the precise tolerances for optimal operation require time and effort.

i think what people are trying to say is you will sell a lot more if they are priced lower
 
exit,

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
The pinch design is simple to manufacture and adds the least thermal mass.

An item that has not been seen before cost more to produce because it needs to be invented; in this case, manufacturing to the precise tolerances for optimal operation require time and effort.
Wouldn't MORE thermal mass, rather than less, add to the efficiency and potency of the vapor production? Less thermal mass brings about the release of heat much quicker, as heat retention is lessened to a degree, I believe.
 
Snappo,

Starless

And bible black
Wouldn't MORE thermal mass, rather than less, add to the efficiency and potency of the vapor production? Less thermal mass brings about the release of heat much quicker, as heat retention is lessened to a degree, I believe.

Maybe to keep the stem from getting too hot near your mouth...? It was said earlier that that was the reason for making the glass capsule longer, so maybe less thermal mass assists with that.

Other guess is that since it adds the least thermal mass, it will mean that it is less likely you'll have to change temperature between using the glass and standard capsule.
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Maybe to keep the stem from getting too hot near your mouth...? It was said earlier that that was the reason for making the glass capsule longer, so maybe less thermal mass assists with that.

Other guess is that since it adds the least thermal mass, it will mean that it is less likely you'll have to change temperature between using the glass and standard capsule.
:shrug:IDK.
 
Snappo,
  • Like
Reactions: Starless

SiDankies

Well-Known Member
Im confused.. every video i see on this thing they are filling the herb into the film or plastic NOT glass. Does this thing come with glass or would i have to buy it seperately. Also what is the main differences between this and the XP?
 
SiDankies,
Maybe to keep the stem from getting too hot near your mouth...? It was said earlier that that was the reason for making the glass capsule longer, so maybe less thermal mass assists with that.

Other guess is that since it adds the least thermal mass, it will mean that it is less likely you'll have to change temperature between using the glass and standard capsule.
I would have to agree with this. Also less thermal mass means it will be even more convection based.
 
Top Bottom