Discontinued The Persei Vaporizer for herbs and concentrates.

MaxVapor

The Professor
@THC SCIENTIFIC
I noticed this on the 8 vaporizer page at the bottom: can you comment on what the "Protection circuit" is?

What is included
  • 1 x 8 Essential Oil Vaporizer
  • 1 x Adjustment Tool
  • 1 x Protection circuit.
 
MaxVapor,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC
I noticed this on the 8 vaporizer page at the bottom: can you comment on what the "Protection circuit" is?

What is included
  • 1 x 8 Essential Oil Vaporizer
  • 1 x Adjustment Tool
  • 1 x Protection circuit.

I was wondering when someone will post about this.

Yes we will have a short circuit protection that is user replaceable included in the kit. It wont be in the tops. So you can either run it with some sort of protection or pedal to the floor type.


We had to include this for legal reasons.
 
Last edited:

Severmore

Well-Known Member
Do you have pictures comparing the brushed vs. polished 8 tops? I do not recall selecting an option when I pre-ordered the 8 top earlier this week. Either way, I am still excited. Does this mean you'll have two different versions of the battery tube as well?
 
Severmore,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Do you have pictures comparing the brushed vs. polished 8 tops? I do not recall selecting an option when I pre-ordered the 8 top earlier this week. Either way, I am still excited. Does this mean you'll have two different versions of the battery tube as well?

EAch top will match with the battery tube. No pics of the brushed. Once our final production pieces are done ill post them up.
 
Last edited:

tharealmclovin

Well-Known Member
My top can be refurbished by you now with minimal charge. Why would I, an unexperienced electrician(I'm really not), rebuild it when you are pros.

Id rather have a new iris
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
My top can be refurbished by you now with minimal charge. Why would I, an unexperienced electrician(I'm really not), rebuild it when you are pros.

Id rather have a new iris

Its actually 7 parts inside, very easy to take apart and put it together, but if its not for you then its not for you. Similar to the Hercules in complexity.
 
Last edited:

thevaf

Well-Known Member
I see a W9 Kayfun-esque in the works that will have an interchangeable deck to accommodate the KISS and substitutes the e-juice for h20...:cool:
 
thevaf,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I see a W9 Kayfun-esque in the works that will have an interchangeable deck to accommodate the KISS and substitutes the e-juice for h20...:cool:

The Okeanos is what your talking about. Kiss and triton capable.
 
THC SCIENTIFIC,

itschad

Well-Known Member
I was wondering when someone will post about this.

Yes we will have a short circuit protection that is user replaceable included in the kit. It wont be in the tops. So you can either run it with some sort of protection or pedal to the floor type.


We had to include this for legal reasons.

can you make it available for preorder as well because i like being safe
 

herbivore21

Well-Known Member
Will the preordered tops come with the matching tube too? Will these be available at the same time? I want one! lol
 
herbivore21,

exit

Well-Known Member
are there any SR71 rods still in stock? i can't get my SR74 rod to work in my SR71 and am afraid i lost the old one... i would definitely buy a couple if possible
 
exit,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC I also believe (could be wrong) that there were once rumors of official w9 kiss cart rebuild kits. Am I correct?



Will the preordered tops come with the matching tube too? Will these be available at the same time? I want one! lol

Pre order tops are just tops. Tubes and rest come later.

are there any SR71 rods still in stock? i can't get my SR74 rod to work in my SR71 and am afraid i lost the old one... i would definitely buy a couple if possible


Yes on the site.

Are we close to the V4 Persei tops release?

V4 tops are the touch button tops and we are finalizing them for production now.
 

Mynameismud

Accessory Maker
Accessory Maker



Pre order tops are just tops. Tubes and rest come later.




Yes on the site.



V4 tops are the touch button tops and we are finalizing them for production now.
Yes very exciting. Except the Pinocchio thing, does that mean rebuild kits aren't happening?

i can't wait to stop using this v2 top. Misfiring, blinking, not working...if I didn't have the iris I would have definitely thrown my Persei across the room by now
 

Mynameismud

Accessory Maker
Accessory Maker
I get the occasional misfire and blinking as well with my V2 top. However t is not very often so I'm not quite ready to throw it yet...:lol:

Yeah mine happens quite frequently or maybe I just use it to much:doh: But the annoying thing is when i have my kiss cart and I go to hand it to a friend that's when it usually misfires. Sometimes have to press the button a few times before it'll actually light up...and also have the light dim or flicker while in use as well.

This really makes me want an 8 but I think I can hopefully hold out for the touch button
 
Mynameismud,

SamuraiSam

Extraction Technician
A more-adjustable than the Persei threaded tube so you could do a single 18490 or 18650 (plus double battery configs) would be really cool.

I'm stoked that other people are stoked on the brushed finish too! I'll be sooo happy to have a durable raw finish that's at home in my garage.
 
SamuraiSam,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Yes very exciting. Except the Pinocchio thing, does that mean rebuild kits aren't happening?

i can't wait to stop using this v2 top. Misfiring, blinking, not working...if I didn't have the iris I would have definitely thrown my Persei across the room by now

Nope still in the works. Just need a little more time.
 
THC SCIENTIFIC,
  • Like
Reactions: DaNi_DuB
Top Bottom