• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Pinnacle Pro

Steele

In the face of evil IandI have no fear.
It gets sticky, only way to not clog screens is to decrease the strength of your meds. I'm sure you'd prefer to clean em :). Get a few in rotation, iso baths for the ones not in use.
 
Steele,

StoneyBeach

New Member
So I am going to post a dissenting opinion on the new glass insert mouthpiece.

I love the concept, but the fricking thing gets dirty/clogged like crazy!

I never had an issue with the plastic mouthpiece in this manner - must be related to the more restricted airflow through it. I'm actually planning on going back to the all plastic version. I use level 2 sometimes 3 and have never had any melting issues.

Anybody else like me?
 
StoneyBeach,

TrueVape

New Member
Maybe the auto off timer, how long we talking....?
Nothing close to 8 minutes, around 1 minute tops, after it is heated up at level 1. Also, it seems to stop heating, and show all the lights if I slightly move, or rattle the unit.
 
TrueVape,

SiDankies

Well-Known Member
So I am going to post a dissenting opinion on the new glass insert mouthpiece.

I love the concept, but the fricking thing gets dirty/clogged like crazy!

I never had an issue with the plastic mouthpiece in this manner - must be related to the more restricted airflow through it. I'm actually planning on going back to the all plastic version. I use level 2 sometimes 3 and have never had any melting issues.

Anybody else like me?

Nope i used my glass one maybe 20 bullets or more before cleaning.
 

Gray Area

Well-Known Member
I've run about 20-30 and haven't had to ISO soak yet. Every day it gets a vigorous brush down with the brush that was included (while cold) to clear debris, but that's it for now.
 
Hi. Finally tested my pp and I'm disappointed. Its nothing what I imagined after my trip with other vape. Takes so long to heat up to 2/3 and gives just faint cloud from finest, grinded herb while being crazy hot. Either it's a faulty item or this is just a joke. I remember getting dense ones from my mates arizer, so I think this goes back to California.
 
erkanasygnale,

GeekVape

Well-Known Member
My new glass pong gets jammed up with materials with use, and it causes major airflow issues. Am I missing a part of it, or is there a screen I should buy to fix this?
UWj2iCb.jpg

I always use a thin layer of organic cotton on top of the bullet. I mean THIN, it should look like a spiders web and you can nearly see through it. Position the screen in the gpong so that it is protruding from the glass ever so slightly and the screen will sit nicely on top of the cotton when assembled and will stop the bullet from moving when you draw on it.

The cotton will not restrict the draw. I will use the same piece of cotton for 2 or 3 sessions.

After every evenings session(s) I clean the gpong and pnp (collar and heating chamber) with a qtip while it is still hot.

I haven't had the need to do a deep clean, and I bought my gpong immediately from @theyoyokid1 as soon as they were available.

The above method keeps everything clean for me!
 

Gray Area

Well-Known Member
I don't use cotton, but would definitely recommend having the screen protruding from the glass a small bit. Not enough to fall out if course, just a bit.
 
Gray Area,
  • Like
Reactions: BarnBoy

CarolKing

Singer of songs and a vapor connoisseur
Hi. Finally tested my pp and I'm disappointed. Its nothing what I imagined after my trip with other vape. Takes so long to heat up to 2/3 and gives just faint cloud from finest, grinded herb while being crazy hot. Either it's a faulty item or this is just a joke. I remember getting dense ones from my mates arizer, so I think this goes back to California.
You should be getting dense clouds with the Pnp. It does run hot. Make sure you are not using wet herb that hasn't been cured properly. Check your screens to make sure nothing is plugged.

If it still doesn't work right you might need to send it back. The key is are you medicated?
 
CarolKing,
  • Like
Reactions: BarnBoy

al bundy

Vaporist
Ive been using the PnP for the last 2 weeks exclusively.
I usually only use it at the park or to pick up kids from school.
But with the glass lined pgong its much better to use.
Almost wish that I had the OG Pinnacle with the new pgong.
I also use a Solo stem that broke at the bowl with a piece of silicone tubing on top of the pgong for a cooler draw at home.and all glass vapor path.
Cb8tsmq.jpg

Out and about I use the stem on the right side the the silicone pictured below from the HI.
2pieceglasstube.jpg

Just remove the glass bowl on the left and put it on the pgong.All glass vapor path.
pjHA347.jpg

This vape works and it vapes well.
Only thing is the battery.
I get 3-4 full uses on it but Ive been charging after 3. and I heat up the 1st time while plugged in if I can.
This does extract very well.
I only use temp 2-3.only flowers.
I clean the collar about once a week with iso vape wipes.
Brush the chamber while cold.
I use screen in by bullets.
To clean glass insert I remove screen when warm (comes right out).
I either torch it or soak it in ISO.
I clean the glass in the pong. I use a qtip and clean it while in the pong,rinse with water,dry,done.
I do push it out slightly as to get no iso on the plastic.

VaporBlunt should contact Vapir about the material they use on the No2.
I SOAK my No2 top in 91% ISO and clean the body with it and that thing never cracks,fades ,or fails in any way.
Really disappointed that theres no trade in program like he said.
Or even the battery issues and the collar issues.
Which is why I cant and dont recommend the PnP to anyone.
Poor customer service will do that.
 
Last edited:

lookhigh

FC member
My new glass pong gets jammed up with materials with use, and it causes major airflow issues. Am I missing a part of it, or is there a screen I should buy to fix this?
UWj2iCb.jpg
When filling your bullet squeeze a little nug on top, helps keep the screen clean and stops spillage.
 
lookhigh,
  • Like
Reactions: BarnBoy

Kief

Medicated
Heads up to those of you having customer service issues... A (new?) VaporBlunt employee is posting in the comments section of their new Baker listing on Massdrop - https://www.massdrop.com/buy/vaporblunt-the-baker ... This person is offering customer service and replacements for the PNP in that massdrop listing. They are also there trying to beat down the negative comments from all of the unhappy previous customers. Come join the conversation.
 

Mister G

Deceptively Old Fart
Heads up to those of you having customer service issues... A (new?) VaporBlunt employee is posting in the comments section of their new Baker listing on Massdrop - https://www.massdrop.com/buy/vaporblunt-the-baker ... This person is offering customer service and replacements for the PNP in that massdrop listing. They are also there trying to beat down the negative comments from all of the unhappy previous customers. Come join the conversation.

Wow, that could get interesting, I'm gonna hold back and see what transpires before I participate. :evil:
 
Mister G,
  • Like
Reactions: BarnBoy

Zappa

Well-Known Member
Yeah really. Apparently a Dave is now saying that they will replace broken PnP's (Once) during the life of the device.

Quote from MassDrop
(Please email me at vaporbluntdave@gmail.com and I will get you a replacement. Initially we were not issuing returns for cracked units as 99% of the time they were cracked due to improper maintenance such as keeping it clean however we will issue you 1 return at no charge for a cracked unit. Please get in touch with me and I will take care of this for you.)

Good Luck Guys!
 

maddinoz

New Member
It gets sticky, only way to not clog screens is to decrease the strength of your meds. I'm sure you'd prefer to clean em :). Get a few in rotation, iso baths for the ones not in use.

which screens would you recommend to replace the GPong screen? I'm back to using my old Pong until I can get this new GPong airflow sorted out.
 
maddinoz,

pakalolo

Toolbag v1.1 (candidate)
Staff member
Yeah really. Apparently a Dave is now saying that they will replace broken PnP's (Once) during the life of the device.

Quote from MassDrop
(Please email me at vaporbluntdave@gmail.com and I will get you a replacement. Initially we were not issuing returns for cracked units as 99% of the time they were cracked due to improper maintenance such as keeping it clean however we will issue you 1 return at no charge for a cracked unit. Please get in touch with me and I will take care of this for you.)

Good Luck Guys!

This is what they should have offered here a couple of months ago. It might be too late now.
 

Zappa

Well-Known Member
This is what they should have offered here a couple of months ago. It might be too late now.

And they haven't actually offered this here still, just on MassDrop. Only time will tell if they intend to honor that for all customers or just those purchased from the previous drops.

After they refused to honor there promise to exchange original PonG's included with the PnP, and there refusal to repair or replace other members cracked devices without considerable cost. I decided at that point even after purchasing a GPonG from the theyoyokid, i wasn't gonna risk my PnP breaking and losing my entire investment so i sold it before that happened. But now they say they will, which might have convinced me to keep it. lol
Because i honestly had excellent results myself with the PnP as far as it working properly, especially after receiving the GPonG.
 
Last edited:
Zappa,
  • Like
Reactions: BarnBoy

Mister G

Deceptively Old Fart
I believe that was in reference to a question from a customer from a previous PnP drop asking would there be the same wait time for actually receiving there purchased unit due to low inventory or slow shipping times.

EDIT: My mistake that was a response to a question in the Water Tool drop about quantity and shipping times, Dave responded in both drops about it from the 1 question. I got confused Sorry.

Thanks, although I'm not sure that's relevant to my comment.
 
Mister G,

ImAdante

Member
I received my pinnacle pro yesterday and it does not heat up unless it is plugged in. It indicates that there is a full battery, but in the middle of heating up level one, or soon after it is heated up, the lights all light up from bottom to top until the all the colors have been shown, then it goes blank. Does anyone know what is wrong and how I can fix it?

This was the same exact issue I had. It might be a faulty battery, the solution was never explained to me in the e-mails but I sent it back and it got fixed, the process was just lengthy(4-6 weeks).
 
ImAdante,
Top Bottom