CharlieBelmont
Well-Known Member
I will report that after purging the tank and refilling it is working again. I think I over-filled it last time and there was too much pressure in the tank. Definitely try that before you give up hope.
Discontinued The Hammer Vaporizer
- Thread starter Hammer Vaporizer
- Start date
-
- Tags
- flame powered
olysh pops
Well-Known Member
Glad you enjoy your Hammer, just 2 little things:
The Hammer is no log vape. There may be some discussion about what the actual definition for a log vape is but I can't really see the Hammer fitting that category in any way
Ed doesn't build the Hammer. Ed supports woodstems for various vaporizers (Solo, Nano, etc...). The actual name of the company producing the Hammer is "Head Tools LLC."
Have fun getting hammerd!
Oups ! Thanks to the Hammer team for building this vape ! And thanks to Ed supporting woodstems !
And thanks to FC to show me the way...
I am following your discussion about log vape, sorry to sow the seeds of doubt...
various127
Well-Known Member
Anyone have any trouble using the hammer with the oil rig bubbler? I want to get some glass for the hammer and it would either be this http://www.dhgate.com/store/product/d020-2-w-glass-water-smoking-pipe-with-two/193620248.html or maybe a small straight shot and if I bought the bub, I just want to know if it still works all the same.
I might get a stem from ed, but I'll probably just find some rubber that fits around the stem. It would probably work, but I want to confirm.
I might get a stem from ed, but I'll probably just find some rubber that fits around the stem. It would probably work, but I want to confirm.
various127
Well-Known Member
Nice! Thanks, I just might. Lately my stem hasnt been vaping evenly without stirring. The bud touching the glass will still be somewhat green if I dont stir.
Maybe the screen is getting worn down from burning it and trying to bend it into place.
Maybe the screen is getting worn down from burning it and trying to bend it into place.
VAPEHUNTER
Well-Known Member
And just in case you find a nice 18MM glass piece you can also use a 14MM female to 18MM female adapter. I use one when ever I want to use my Hammer or Pinnacle Pro with my recycler. Like @kidfated said if you put one of the Rubber gaskets, included with the Hammer, on the mouth piece end of a stem it fits perfectly in the 14MM female adapter.I used a Stock stem with a piece of silicone to mate with a 14mm male and female. You should be okay!
Get that eds stem
14mm to 18mm Link → http://www.ebay.com/itm/like/321423360861?lpid=82
We are looking for a few good FCers to test out a couple of new prototype parts for the Hammer. Just email or PM me with your name and mailing address and I will send you a free Prototype Gasket Set that includes two parts we would like your feedback on. Sorry international peeps, this offer is for US Hammer owners only.
The first part in the set is a black gasket that is placed into the small end of the Hammer housing and forms a barrier to better isolate the clean air intake. It also has the added benefit of stabilizing the heat exchanger against rough handling. Below is a quick video showing the part and installation:
The other part is a white gasket can be used to create a makeshift GonG adapter with any standard Hammer stem. Just slide it over the mouthpiece end of a standard stem and put that end into a 14mm female glass joint to create an airtight seal. This is similar to what @paytonpenn shows in his conduction videos. David will posts a few pics soon.
All that we ask in return is that once you have had a chance to play with the prototypes for a while, you PM @Head Tools or email support@thehammervaporizer.com with your feedback I have a limited number of these to give out, so they will be available on a first come basis.
The first part in the set is a black gasket that is placed into the small end of the Hammer housing and forms a barrier to better isolate the clean air intake. It also has the added benefit of stabilizing the heat exchanger against rough handling. Below is a quick video showing the part and installation:
The other part is a white gasket can be used to create a makeshift GonG adapter with any standard Hammer stem. Just slide it over the mouthpiece end of a standard stem and put that end into a 14mm female glass joint to create an airtight seal. This is similar to what @paytonpenn shows in his conduction videos. David will posts a few pics soon.
All that we ask in return is that once you have had a chance to play with the prototypes for a while, you PM @Head Tools or email support@thehammervaporizer.com with your feedback I have a limited number of these to give out, so they will be available on a first come basis.
paytonpenn
Level 30 Nature/Healer
I can vouch that whatever size white gasket they are offering for the water pipe connection fits for 14mm gongs exceptionally well. My video is an example of the makeshift concept but the one they will give you should fit much better. Its very snug and connects well, doesn't go too far in it.
The prototype gasket I highly recommend you guys to check out. Really cleans the air path, I for one am in love with it.
It allows easier concentrate usage and purifies the airpath so there is never foul taste from residue hits. Also makes my conduction method more visually appealing and simpler.
Never having the heatport move is also wonderful. Its great they are able to improve the Hammer continuously.
The prototype gasket I highly recommend you guys to check out. Really cleans the air path, I for one am in love with it.
It allows easier concentrate usage and purifies the airpath so there is never foul taste from residue hits. Also makes my conduction method more visually appealing and simpler.
Never having the heatport move is also wonderful. Its great they are able to improve the Hammer continuously.
$unnyblaq
mist-or-vapor
Wow @Hammer Vaporizer I love this!!!. This is a great idea to make this vaporizer even better. I can't wait till this comes out
. This would make hammer top notch beacuse clean air and Gong I think you guys have a winner with this
. I will be waiting on more news
. This would make hammer top notch beacuse clean air and Gong I think you guys have a winner with this. I will be waiting on more news
Vapodudule
Well-Known Member
after practising the double stem method, i emailed to apply for testing of this gasket, it seems to fit the application.
It opens other functions too. if i understand it well, it opens the port for conduction dabs and securize the heater position.
It opens other functions too. if i understand it well, it opens the port for conduction dabs and securize the heater position.
Fenton Mewley
A man in search of cloudier pastures
The one thing I despise about the Hammer is that herbs will be blown into the heating element if I draw too hard.
Hammer should make screens that fit in the element.
Hammer should make screens that fit in the element.
various127
Well-Known Member
Only one gasket came with mine that was already attached, if I got it out you think I could cut it in half to use? If not I might just buy a mini straight shot with the rubber slider bowls, the hammer stem fits in the downstem pretty well without anything, but I guess the glass may scrape. You can just take the rubber ring from the bowl and use that, if anyone plans on buying one.
How is the double stem method? Is it any different?
Last edited:
Vapodudule
Well-Known Member
YOu attach a lock on stem on the other heater port (not the one you put the stem), so that the fresh air is pumped far away from the butane.
You will need another silicone piece and circlips to permits the stem attachement (the same bundle from the normal port).
various127
Well-Known Member
Would you recommend everyone to try this for taste? Or is the difference not much?
I could see how it would help when held vertically. Also the silicone bundle comes with two silicone pieces right?
Vapodudule
Well-Known Member
Well this method was suggested by the manufacturer himself because of my particluar use of the device which is horizontally, the stem or gong standing vertically (J-hook, bub etc). The taste of butane bothers me enough to perform two stem everytime now. Plus, you have a way to test the heater level by blowing into the 2nd stem (in whicih there is no more screen) onto your peel of the back of your hand.
I recomand testing once because the design has been done to separate airpath but i found the taste alterated without the double stem method. Hey two function at once with OEM equipement? why not trying?
Well aware of that, the manufacturer began to solve the pb with an hard gasket on the port#2. Ill bet the hammer 2.0 consider the fresh air pb. allow a no-glass/unbreakable stems too.
Hammer is one jewel of the market. soon ed should allow a no-glass config.
cheers guys.
Last edited:
Most of the Prototype Gasket sets mailed this weekend, a few more will be going out today. I think we have just a couple more left. Thanks to everyone that jumped on the offer to help support and improve the Hammer!
Madcap79
Jack of all trades, master of none.
Received my gasket set today in the mail. Will report. Thanks @Hammer Vaporizer !
Shame I'm over in the UK or I'd be all over the new gaskets. Nice one for improving your product again @Hammer Vaporizer , shows commitment to your customers.
@paytonpenn as for your dabs technique (thanks again btw) is it not a bit unusual to have a SS dabbing surface? I'm not big into my oils but my friends (ones with the vac chambers lol) said the hammers not a great idea because SS isn't ideal for dabbing. I used it as a mobile dab rig with an epik as a dabber for a camping trip and we all got on great with it regardless. Could have done with an extra set of hands though
@paytonpenn as for your dabs technique (thanks again btw) is it not a bit unusual to have a SS dabbing surface? I'm not big into my oils but my friends (ones with the vac chambers lol) said the hammers not a great idea because SS isn't ideal for dabbing. I used it as a mobile dab rig with an epik as a dabber for a camping trip and we all got on great with it regardless. Could have done with an extra set of hands though
LuckySeed777
Well-Known Member
I'm having hammer withdrawals... The igniter on my unit failed Saturday night. 
$unnyblaq
mist-or-vapor
So I got my gaskets today in the mail thnx @Hammer Vaporizer 
. I put in the one for backside of the hammer and I feel it does help keep it steady. So far it seems that the airway is also clear now thnx to the gasket. So I went to try my bong because I've been dying to hit my hammer through water. As I went to grab it, it slipped off the shelf on to my foot and floor
. Ouch and what luck now I'm out a 50 dollar glass piece and can't try my hammer through water. Now I have to wait to review that gasket but it fits great on the stem and it fit my bong snug. So all in all I love the new improvements,and will keep my eyes open for anything new from you guys @Head Tools . Also would love to snag a hammer bubbler like @Yoosh won looks amazing and would like to see a pic of it up close
. my hammer is still my favorite vape and daily driver and will continue to be until the sledgehammer/hammer2.0
. Hammer on brothers
. I put in the one for backside of the hammer and I feel it does help keep it steady. So far it seems that the airway is also clear now thnx to the gasket. So I went to try my bong because I've been dying to hit my hammer through water. As I went to grab it, it slipped off the shelf on to my foot and floor. Ouch and what luck now I'm out a 50 dollar glass piece and can't try my hammer through water. Now I have to wait to review that gasket but it fits great on the stem and it fit my bong snug. So all in all I love the new improvements,and will keep my eyes open for anything new from you guys @Head Tools . Also would love to snag a hammer bubbler like @Yoosh won looks amazing and would like to see a pic of it up close. my hammer is still my favorite vape and daily driver and will continue to be until the sledgehammer/hammer2.0. Hammer on brothers
Last edited:
@Head Tools just gave me a few more Prototype Sets to send out if anyone else wants one. Also, let me know if you requested one and don't get it by end of next week.