Discontinued Utopia Desktop Herbal & Oil Vaporizer

THC SCIENTIFIC · Jun 17, 2014

This is what you guys will be testing. Not the final version but it's pure 100% glass air path.

Caligula · Jun 17, 2014

What is that... a pen in the background?

Vape Dr. · Jun 17, 2014

Caligula said:
What is that... a pen in the background?

Lol, good eye! Could be something new!

THC SCIENTIFIC · Jun 17, 2014

back ground is a hookah stem. My testing station has different types of items we test.

herbivore21 · Jun 17, 2014

Woo, I can put 2 + 2 together! Take that all you doubting kindergarten teachers!

I am very keen to see this!

Vape Dr. · Jun 17, 2014

THC SCIENTIFIC said:
This is what you guys will be testing. Not the final version but it's pure 100% glass air path.

Is the E-nail going to be a male joint?

syrupy · Jun 17, 2014

That must be some hammer rod to take the heat from being enclosed in glass like that. I like the design. Reminds me of the VHW, where the heater is separated from the air path by glass. If it's anything like that, I would expect superior taste.

herbivore21 · Jun 17, 2014

syrupy said:
That must be some hammer rod to take the heat from being enclosed in glass like that. I like the design. Reminds me of the VHW, where the heater is separated from the air path by glass. If it's anything like that, I would expect superior taste.

The hammer is enclosed by glass in the Bender too

I am hoping for 18mm male myself lol

Vape Dr. · Jun 17, 2014

Is weight going to be an issue on rigs with smaller diameter bottoms (tipping over?) or not with the joint in the center? Will it work with side stem rigs?
Any idea how much the E-nail will weigh?
Can you show us a pic of your setup with the E-nail on it? :brow:

So many questions!!! Ahhh!

THC SCIENTIFIC · Jun 17, 2014

Vape Dr. said:
Is the E-nail going to be a male joint?

Not sure yet

syrupy said:
That must be some hammer rod to take the heat from being enclosed in glass like that. I like the design. Reminds me of the VHW, where the heater is separated from the air path by glass. If it's anything like that, I would expect superior taste.

It's an all glass air path that's 100% sealed.

Vape Dr. said:
Is weight going to be an issue on rigs with smaller diameter bottoms (tipping over?) or not with the joint in the center? Will it work with side stem rigs?
Any idea how much the E-nail will weigh?
Can you show us a pic of your setup with the E-nail on it?

So many questions!!! Ahhh!

Final weight will be disclosed once we are done.

As for it tipping over this has to do with final weight. Can't make it work for everything but we will try.

Breathemetal · Jun 17, 2014

I am very intrigued

THC SCIENTIFIC · Jun 17, 2014

Breathemetal said:
I am very intrigued

The line forms behind me sir. The new version is being manufactured this week, and we should have it monday or tuesday.

Once done well give it a good test and get some vids up.

PPN · Jun 18, 2014

Is it an issue if I don't already own Hammer and The Core?

sasNW · Jun 18, 2014

Pumped to give this thing a try. Do you have a ballpark figure on what it will cost us beta testers without any of the required parts?

MyWomanCooks · Jun 18, 2014

@THC SCIENTIFIC ... gotta say I'm pumped to be on the list. I have been waiting for the hammer rod to come back out before that purchase is that (the rod) going to be necessary? Also I think ive read some where in here that your redesigning the hammer? And then how will the 8 interact with the hammer or will it not be needed and you can just use somthing like the hammer rod? I understand if you can't divulge anything.

THC SCIENTIFIC · Jun 18, 2014

MyWomanCooks said:
@THC SCIENTIFIC ... gotta say I'm pumped to be on the list. I have been waiting for the hammer rod to come back out before that purchase is that (the rod) going to be necessary? Also I think ive read some where in here that your redesigning the hammer? And then how will the 8 interact with the hammer or will it not be needed and you can just use somthing like the hammer rod? I understand if you can't divulge anything.

the Hammer rod is necessary to get the enail working we already started producing the hammer rods as their design is done deal nothing will change on that.

The Hammer rod will work the same on the 8 as it did with the Persei, the Hammer tops will be incorporated most likely into the new touch button tops we have for the bender.

Meghan · Jun 18, 2014

I'd like to snag a spot on the beta list, since there appears to be a few left.

THC SCIENTIFIC · Jun 18, 2014

New updated List of Beta Testers.

@Breathemetal
@Caligula
@herbivore21
@DieHard
@mutten840
@Silver420Surfer
@chingdaddy
@SamuraiSam
@MyWomanCooks
@PPN
@theCerberus
@Darb
@sasNW
@Vicki
@Adobewan
@Vape Dr.
@z9
@mephisto
@vapurrr
@bdizz
@lockie
@CG420
@FLskwat
@Pickz
@MaxVapor
@Meghan
@FeelingFactory
@SunnyStefan
@ataxian

29 Spots down 1 more to go.

Another Shot of the enail body.

FeelingFactory · Jun 18, 2014

Crawling out from the woodwork once again to request a beta spot please, sir!

Is there an equipment pre-requisite to test? I have not invested in The Core, Hammer, or other Persei products yet but see how already owning might be relevant to this beta testing. Thanks for the opportunity!

I let 3 other heavy W9 vaporists know about the beta in case they were as slow as me to notice. Let's see what happens!

bdizz · Jun 18, 2014

cant wait to try this out!!!
I know you guys are gonna knock this outta the park.
:mmmm:

Another Shot of the enail body.

[/QUOTE]

Caligula · Jun 18, 2014

THC SCIENTIFIC said:
New updated List of Beta Testers.

@Breathemetal
@Caligula
@herbivore21
@DieHard
@mutten840
@Silver420Surfer
@chingdaddy
@SamuraiSam
@MyWomanCooks
@PPN
@theCerberus
@Darb
@sasNW
@Vicki
@Adobewan
@Vape Dr.
@z9
@mephisto
@vapurrr
@bdizz
@lockie
@CG420
@FLskwat
@Pickz
@MaxVapor
@Meghan
@FeelingFactory

27 Spots down 4 more to go.

Another Shot of the enail body.

This makes me excited! I wanna... DANCE!

ataxian · Jun 18, 2014

THC SCIENTIFIC said:
Well guys some of you know about our oil vapes and how we always invent well this is a prelim thread to get discussion going on our up and coming enail.

First of all i have a few questions

For the People who use enails what temperatures do you vape with?

What are you looking for in enails?

Also i would like to say our prototype enail is now under testing and initial results show that it can get to 650F with minor tweeks and small redesign we should make it reach 700-750F.

Once this prelim testing is done and we get a base result and redo the prototype and introduce it to the masses.

Since I'm not on the list may some body can let me know if it's any good?

syrupy · Jun 18, 2014

ataxian said:
Since I'm not on the list may some body can let me know if it's any good?

Yeah, I want to see lots of reviews of the beta and the final product.

@ataxian I think there's a few spots left. I know you already have the Hammer part from your Bender pics. Do you have a Core too? I think those are required but I'm not sure.

FeelingFactory · Jun 18, 2014

There's still a few spots left, get back on! =)

ataxian said:
Since I'm not on the list may some body can let me know if it's any good?

ataxian · Jun 18, 2014

FeelingFactory said:
There's still a few spots left, get back on! =)

I don't think I qualify to be on the list?

My concentrate taste so good!

Discontinued Utopia Desktop Herbal & Oil Vaporizer

To Boldly Go Where No One Has Gone Before

Maximus

Well-Known Member

To Boldly Go Where No One Has Gone Before

Well-Known Member

Well-Known Member

Authorized Buyer

Well-Known Member

Well-Known Member

To Boldly Go Where No One Has Gone Before

Well-Known Member

To Boldly Go Where No One Has Gone Before

Volute of Vapor

Well-Known Member

Active Member

To Boldly Go Where No One Has Gone Before

Well-Known Member

To Boldly Go Where No One Has Gone Before

Well-Known Member

Well-Known Member

Maximus

PALE BLUE DOT

Authorized Buyer

Well-Known Member

PALE BLUE DOT