The Herbalizer

DDave

Vape Wizard
Accessory Maker
That's real cool you get to visit their offices.

Just pulled my bowl off, and the magnet came off from the bowl :( I had already ordered another bowl setup earlier this week. Murphys law and all that.

Gonna shoot email to support@herbalizer.com

Hey, anyone know if JB Weld releases anything unwanted at high temperatures? May be a great fix for this issue if it does not.

From the website,

g-faq-q.png


How much heat can J-B Weld withstand?
g-faq-a.png


Original J-B Weld can withstand a constant temperature of 500º F. The maximum temperature threshold is approximately 600º F for a short term (10 minutes). Refer to individual product packages for more temperature information.


If JB Weld doesn't off gas, the bond it would create between the bowl and bowl-magnet could be "eternal". :rockon:
 

grokit

well-worn member
Herbie for life :tup::
Great article; evidently we can remove half of the toxins* generated by vaping mj if we keep the temperature to 420f, and remove 75% of them* if we keep it to 390f. Interestingly, the one toxin that remains at 390f (toluene) is considered to be "Much less toxic than benzene".

http://www.weedist.com/2012/07/tailoring-high-compounds-in-cannabis-properties-boiling-points/

* by number of toxins, the "concentration % of dry weight" is not known yet for these substances.
 

Jethro

Well-Known Member
Wow, why does this device need to be so expensive:( I want one but can't afford it.
 
Jethro,

DDave

Vape Wizard
Accessory Maker
Search the forum for that JB Weld stuff. There's a log vape thread or a glass thread somewhere that we discussed it in back in the day.
@stickstones, Awesome! It was such an obscure thought that I didn't even think to see if it had been previously discussed.

Edit:
OK, JB Weld is referenced as being used in many vapes, many applications, by many FCers... So, I provide these references.... However, its use remains up to the "user"... ;)

FCers:
http://fuckcombustion.com/threads/davinci-by-karma.4928/page-115#post-531661
http://fuckcombustion.com/threads/davinci-by-karma.4928/page-114#post-530111
http://forum.grasscity.com/vaporizers/1263703-da-vinci-vape-flexi-straw-fix.html
http://fuckcombustion.com/threads/omicron-vaporizer-for-oils.4301/page-406#post-354296
http://fuckcombustion.com/threads/eds-tnt-wooden-vapor-tubes-vapor-stems.3342/page-65#post-298761

7th Floor uses JB Weld!
http://fuckcombustion.com/threads/7th-floor-life-saber-lsv.2641/page-59#post-281462
 
Last edited:

stickstones

Vapor concierge
check the aromazap thread for jb weld discussion. I have a CD carb tube for my PD that has the ss bowl attached to the glass with jb weld. it has held up for years, but is not in the vapor path. I wouldn't want that shit in the vapor path, but holding stuff together outside the vapor path seems to be what it does well.
 

DDave

Vape Wizard
Accessory Maker
I would imagine that this particular version would be the one to look into guys.

HighHeat.jpg
@grokit, from the name, would agree with you completely... however...

Original J-B Weld can withstand a constant temperature of 500º F. The maximum temperature threshold is approximately 600º F for a short term (10 minutes). Refer to individual product packages for more temperature information.

For a vape, like Herbie that can reach 462.2F, I think the 500º F version has us covered.
 

RobG

Out on a limb
Hey guys,
I just wanted to thank y'all for all the great information you are putting out there. This thread really helped me get a good grasp on the advantages of Herbie over the volcano and I can't wait until it arrives on Monday so I can officially join the fan club!
 

RobG

Out on a limb

Been Vapin

Fringe Class
Replaxcemnt bowl is in! I also have another bowl coming Monday! Wooooohoooo!

Has anyone else got the French greeting yet? Ever time I want to translate it is too quick.
3 months in and I am still getting new messages.
Sometimes me and my friends sit around Herbie,opening and closing the lid.
I have been trying to hit diff button combos and stuff to unleash easter eggs.
 

Vitolo

Vaporist
Did this ever get figured out? I never found any and don't remember anyone definitively saying they found any. Did I miss it?
SliM found it.
I found it.
I gave a hint or two.. but was subtle.
I do not think it has been revealed.
It has become a highly protected brotherhood.
Crawl through snake pit etc.

Was I supposed to finally reveal this?
was I to be the one to end the hunt... for those still spinning Herbie on his edge and chanting "Baby needs shoes"?
Oh tell me in a pre vape session message oh mighty Herbie.
ZSpeak comfort to me.
In a moment of message perhaps you could say something new... like "go ahead Vito... tell the world where the egg is hidden".
I wait for a sign.:|

i dont think so i think it got kind of forgotten about:)
I forgot I was keeping the secret to tell the truth!!!
Has anyone else got the French greeting yet? Ever time I want to translate it is too quick.

I have been trying to hit diff button combos and stuff to unleash easter eggs.
There may be 2 french greetings. One was the one that won me my shirt! "
Laissez les bons temps rouler"... (let the good times roll ... spellings vary!)
re: different combos... you are on the right track!
 
Last edited:

RobG

Out on a limb
I have been trying to hit diff button combos and stuff to unleash easter eggs.

Have you tried the konami code? Maybe the temp buttons could be up down, then the left and right could be 2 of the 3 buttons above that and then hit the aromatherapy and vapor buttons for BA and the fan as start? I think that'll be my first guess anyway!
 
Last edited:

Chill Dude

Well-Known Member
So, my Herbie arrived yesterday. It came proffessionaly packaged and looked awesome! Wait...I opened the clam shell and plugged it in with my excited eyes focused on the display. What came next was a major shock. The display illuminated the dreaded message "SERVICE NEEDED". Talk about a fucking buzz kill!! Anyway, I left them an email message yesterday and a follow up call this morning and left a message. I live in San Diego and was hoping I could swing by their office to get a replacement. Does anyone no if they're open Saturday? I know Josh and staff will take care of me, but at the same time I'm pretty bummed out. Why me? Why? Why??
 
Top Bottom