Silver Surfer Vaporizer

Raskin666 said:

Anyone else notice that the GG wand doesn't seem to cook as evenly as the standard wand? I am wondering if it's my mind or not, ha. I find myself turning the heat way higher than I do with the standard wand.

Click to expand...

do you stir between hits?

hoptimum said:

do you stir between hits?

Click to expand...

Yes, every hit besides the first two or so. I just stayed up too late watching Kung Fu movies and experimenting with the two different heater covers.
I think have determined that the GG can get pretty even, but with larger loads than than what is possible with the Standard wand. But my experiments made it increasingly harder to judge

With the SG: first 2-3 visits no stirring, then once the clouds thin I stir once or even tap rapidly on the wand shaft to rotate the load, anymore stirring/tapping after this point appears to do very little....for me!

In an earlier post at http://fuckcombustion.com/threads/silver-surfer-vaporizer.2/page-98#post-4463 I agreed with you. Check it out.
That is why I say the standard wand is most versatile.. you can move it around and aim the heat.

I stir my GG wand every hit when I'm using a water pipe. I pull the GG wand out when I'm almost done my toke to clear the tubing of any vapor so it's just convenient to do so. I manage to get an even toast of my herb most of the time. I've found that the 'temperature:draw' speed ratio is definitely more important for the GG setup than the standard setup.

Vitolo said:

Remove mouthpiece from tube...
stick this in same spot.

Then stick that in any water device....
water device becomes the mouthpiece.
It comes in 14 or 18
If you have one everything works.
Austrailian Vaporizers does not carry water pipes.

Click to expand...

If someone explained it in that simple language for me the first time then I would have got it straight away. Funny how complicated things seem when there are no pictures as a mental aid.

Show head ash catcher makes for good water filtration. Hits smooth and adds the perfect amount of drag.

^^Do you have a pic showing how the screen is arranged in the glass connector part(what is that called?) which connects to the dab HC?

why would there be a screen?

He means the wand I think (or what you use as a wand)
In the official OEM SSV oil rig wand there is a screen
This diffuses the oil and allows some to go into the wands reclaim pit.
The screen also catches any spatter so that it can be exposed to the incoming heat and also be vaped.

Hi Guys!
I'm about to purchase an SSV and I've got a couple questions before I decide on where I buy it and which type and color I choose.

I'm quite impatient when it comes to online orders, as we probably all are
Since I live in Canada it makes it more complicated for me to shop for vapes.
There's a Canadian store that Sells an SSV with Ground Glass for 280$ taxes and all included. Received in 2 days.
There's 2 things troubling me. 1st it's not the Spherical Ground Glass and 2nd I can't get a bong adapter. (unless the Extreme Q's elbow adapter works).

So I've been looking at the silversurfervap website. They have "Reclaimed" SSV's selling for much cheaper. 70$ off is pretty nice! So I'm thinking about it...any thoughts on the Reclaimed ones? Anyone ordered one?

Asieffert said:

Show head ash catcher makes for good water filtration. Hits smooth and adds the perfect amount of drag.

Click to expand...

Well thanks for sharing pic.. i will try it and hope for good outcomes..

SunnyHours said:

There's 2 things troubling me. 1st it's not the Spherical Ground Glass and 2nd I can't get a bong adapter. (unless the Extreme Q's elbow adapter works).

Click to expand...

To switch from GG to SGG afterwards is gonna cost extra. So if you don't want GG then I'd find a different place to buy.

And yes, the EQ adapter works. I'm using a EV-2 elbow right now, very similar to the EQ elbow, works great.

SunnyHours said:

So I've been looking at the silversurfervap website. They have "Reclaimed" SSV's selling for much cheaper. 70$ off is pretty nice! So I'm thinking about it...any thoughts on the Reclaimed ones? Anyone ordered one?

Click to expand...

Go for it. They are fine units. I believe they used to be called "blemished", and most arrive with very little if any blemishes.

Ordered my "Reclaimed" SSV with the Spherical GG in Rainbow Zen...hoping it will turn up in time for my birthday on the 30th of June

Hey guys! I'm a newbie here and I'm getting my first vaporizer tomorrow (SSV of course!). I had a couple of questions real quick:

1: I've heard that the SSV can easily get hot enough to combust the weed if you turn it up too high. Assuming I'm doing slower draws, at about what clock position is the combustion point? I ask because I know that to get a good amount of CBDs (and thus an easier time sleeping, which I want at night) you have to heat it a bit more since CBD has a higher point than THC. I just wanted to know how high I could turn it up before I would have to worry about combusting. Someone else suggested that a ~2:30 position should EASILY be enough to get the CBDs. Does that sound about right, or does someone suggest something different?

2. I keep seeing Tweak's modification to the SSV being mentioned (dealing with the screens apparently?). Can someone point me towards this mod? I tried searching the forums but I guess I'm not choosing the right keywords. Went through a few pages of this thread looking for it but got tired of looking after 10 pages :[

3. Lastly, is there any advice you'd guys suggest in general? How to get the best Sativa high (slower draw speeds at a low temp, maybe 11 o'clock?), how to get the best indica high, whatever you think might be helpful for me. :] You can PM the answer to this question to me of course, since I know it's not 100% on topic (unless you have a SSV specific tip, then go ahead!). I've looked through a lot of pages of this thread, but of course I've probably missed a ton

Thanks a ton, been lurking for a bit and you guys are an awesome community! Sorry if these questions have already been answered, been looking for them for the past week or so and I haven't turned up anything :x

Also Sunny, you planning on vaping the fuck out on your birthday? I'm getting back home on Tuesday and my vape will be there when I get back. Can't wait, already planning out movies and activities since I plan on really breaking in the SSV to the best of my ability!

Jams said:

2. I keep seeing Tweak's modification to the SSV being mentioned (dealing with the screens apparently?). Can someone point me towards this mod?

Click to expand...

Probably because I keep mentioning it, lol. Works best with standard wand.

SSV EQ Elbow pack

And to make an even smaller bowl, I suggest picking up a VB mini wand + some e-nano basket screens. This combo is cheaper and no fussing with removing the metal ring from the screens.



My SSV has been getting some more lately. It can deliver a hit like no other vape I've tried. Just ordered some new silicone whip for her, can't wait to throw my yellow whips away, lol.

I just got a confirmation of shipping today, for other Canadians who ordered an SSV, how long did it take to get to you?

I live in Canada, ON and I've ordered twice from 7th floor, from what I can remember it was between 7 - 12 business days.

Anybody order their Silicone tubing from Amazon.com?

Just bought ten feet and it has a rubber smell to it. The stuff I got from USPlastics.com had no scent at all.

Maybe this is what people refer to when mentioning tasting the whip?

Nope I've never ordered tubing, I just go down to higher elevations/elev8/ssv shop and pick some up from the girls!

Just had to rub it in for everyone who doesn't have direct access to the shop in Colorado Springs




Here's the updated setup. Wooden tray so you can take a dab sitting on the couch watching tv. Nonslip mat, glow in the dark stok containers, led light, and some glass work. Minus a beer she's all complete and rips!

Does anyone know where I can purchase a Vapor Tamer mouthpiece outside of 7th Floor? I see that VaporNation carries the Saturn Tamers but no mouthpieces.

I want to try that E-nano screen mod tweak mentioned, but they don't accept anything other than paypal. any other screens that you could perform a similar mod with?

Tweak said:

And to make an even smaller bowl, I suggest picking up a VB mini wand + some e-nano basket screens.

Click to expand...

Will the e-nano screens work with the standard ssv wand?

afraid_to_poop said:

I want to try that E-nano screen mod tweak mentioned, but they don't accept anything other than paypal. any other screens that you could perform a similar mod with?

Click to expand...

just kidding. i ordered it! i'll let you guys know how it works when it arrives!

afraid_to_poop said:

any other screens that you could perform a similar mod with?

Click to expand...

The Underdog website has the same type screens, but not sure how big they are.

You do have a VB Mini wand correct?

tuk said:

Will the e-nano screens work with the standard ssv wand?

Click to expand...

Unfortunately no, you could probably stretch one out to fit but that wouldn't hold very well.

There is a pretty big difference in bowl size between the two.




I have 1/4" ID X 3/8" OD piece of tubing on the Mini VB, and a 3/8" ID X 1/2" OD on the Standard. The combo is awesome!!! I recommend all users get this setup, . No more messing with putting a screen in the middle of the VB mini.

Edit:
100% crop from above image ^^


The nano screen just falls right through the standard.