Ano
FC Lover
@Mr. Gweilo 420, sorry if I missed the information, but is the tornado 18 or 14mm ?
Last edited:
@Mr. Gweilo 420 - Thanks for all your guidance on the Tornado! Just for kicks & giggles, can you make us a vid that shows the tornado action just like in the video link attached below? I think by lowering your water level a little bit, the initial chug should help to make it more controllable overall. Thanks again!!!Ok here is a video of the DO-Q. I have broken my no video rule by doing this. I hope it is helpful. Also, in regards to a few questions being asked it is taller than the DO-20 but much smaller than something like a GB-186. The glass is thick enough. It looks strong. It does not take much to get it going. There is a small delay while the tornado forms but it only requires a smooth pull similar to the other D0-20 series. Actually, the neck and can look the same as the Do-20-T
Some images;
Ok here is a video of the DO-Q. I have broken my no video rule by doing this. I hope it is helpful. Also, in regards to a few questions being asked it is taller than the DO-20 but much smaller than something like a GB-186. The glass is thick enough. It looks strong. It does not take much to get it going. There is a small delay while the tornado forms but it only requires a smooth pull similar to the other D0-20 series. Actually, the neck and can look the same as the Do-20-T
Nice vid and pics judging from the vid that appears to be a 18mm joint. I would guess playing with the water level will help fine tune the tornado action, it does get a bit turbulent once you get it going strong. It is a fun looking piece, and different than my others, so I look forward to playing around with this one.Ok here is a video of the DO-Q. I have broken my no video rule by doing this. I hope it is helpful. Also, in regards to a few questions being asked it is taller than the DO-20 but much smaller than something like a GB-186. The glass is thick enough. It looks strong. It does not take much to get it going. There is a small delay while the tornado forms but it only requires a smooth pull similar to the other D0-20 series. Actually, the neck and can look the same as the Do-20-T
Some images;
@Mr. Gweilo 420 - Thanks for all your guidance on the Tornado! Just for kicks & giggles, can you make us a vid that shows the tornado action just like in the video link attached below? I think by lowering your water level a little bit, the initial chug should help to make it more controllable overall. Thanks again!!!
http://es.tinypic.com/player.php?v=jghz43&s=8#.U5RxnCjwrgJ
Yes the payment system on iOffer is a bit weird with some sellers. Others it s a breeze. The good thing is that you can usually make an offer for less than the "Buy Now" price. Example: https://www.ioffer.com/i/569102963. This Quave Banger KO shows $25.99. My offer for that item was $21.00. It took a couple of days but it was accepted. I also bought 10 Keck clips. Total offer including shipping was $35. Shipping was very fast. I have used 3 different sellers on iOffer: Oregonglassblower , GreenBuddahShop, and BakeBros. All were smooth transactions and great items.I finally settled on the BTOC double barrel. I ordered a 14mm female to 18mm female so i can use the enano with its adjust a bowl gong. Does anyone else have experience with this type of setup yet? Am i doing it wrong? Also i ordered the adapter on ioffer and it says await further payment instructions. Ive never gone throug ioffer before is it just up to the seller to send me an email through the site with a paypal address or something? Thanks for everyones help hopefully i will have my new (and first ever ) recycler in a week!
If you intend to use tubing, than there is really nothing that limits you in terms of size and shape. We are having the most success with Sunshine store still, though Yingmin5 is widely liked and Kathy Hu, who had a bad couple months, seems to be recovering in quality and shipping.Newbie to glass??
OK, so I've read page after page about cheap bubblers and there are too many choices.
I have a miniVAP (MV), only vape buds, and want to try a bubbler.
I just want to cool / humidify? the vapor slightly.
I want to keep all the original taste that's possible and all the THC that's possible.
I'm going to buy the MFLB water whip (14 mm) to connect piece to my miniVAP.
So, probably no need to invert MV/ have it sit in the piece.
What piece will work best for me, D020 or one of the other models?
What vendor is best for ordering?
I'm guessing a piece with minimal size and minimal diffusers/percs/ etc is best.
Thanks for suggestions, anxious to try !!
Yes the payment system on iOffer is a bit weird with some sellers. Others it s a breeze. The good thing is that you can usually make an offer for less than the "Buy Now" price. Example: https://www.ioffer.com/i/569102963. This Quave Banger KO shows $25.99. My offer for that item was $21.00. It took a couple of days but it was accepted. I also bought 10 Keck clips. Total offer including shipping was $35. Shipping was very fast. I have used 3 different sellers on iOffer: Oregonglassblower , GreenBuddahShop, and BakeBros. All were smooth transactions and great items.
I finally settled on the BTOC double barrel. I ordered a 14mm female to 18mm female so i can use the enano with its adjust a bowl gong. Does anyone else have experience with this type of setup yet? Am i doing it wrong? Also i ordered the adapter on ioffer and it says await further payment instructions. Ive never gone throug ioffer before is it just up to the seller to send me an email through the site with a paypal address or something? Thanks for everyones help hopefully i will have my new (and first ever ) recycler in a week!
Have you considered a female gong in the correct size? You could eliminate the need for an adapter and female gong is so easy to pull off for clearing
Im willing to try it but I dont know of a female gong that is made to work with the e-nano. Do you have any links you could share?
http://www.epicvape.com/index.php?route=product/category&path=62_64Im willing to try it but I dont know of a female gong that is made to work with the e-nano. Do you have any links you could share?
http://www.planetvape.ca/pvhegong-high-efficiency-gong.htmlThanks but i think those gongs are for female joints. I could be wrong though, its not clear from reading the description.
I really appreciate it!!! I think Im going to get JODA Glassworks on the case
Those are for the Solo, won't work with the Nano. Go with these:
Agreed. As a glassblower, I still realize the need for lower end glass, and an affordable 19mm hydratube is definitely something the market is hurting for. Give Kathy a month and maybe we'll see one. The presence of the 14mm hydratube means they have a factory with knowledgeable workers, and there's zero reason why the couldn't do the same thing in a 19mm setup. Some American or European glassworker probably got paid in lobster and hookers to divulge all these techniques, but that's another story.
That being said, I hardly use my Hydratubes and much prefer a tabletop bubbler.
Seperate question for you guys, from someone who hasn't looked at this thread in about 1/4 of a year: how many points of diffusion does the D020-D offer? It's hard to tell from the photographs.
First time poster, long time lurker. Thanks so much for the wealth of knowledge and the simply awesome vids.
Just thought I'd throw this in the mix. My LHS has lots of DHgate pieces. Last night I stopped by to find knockoff Hamm Exo-diffys for 89.99. That is typically what they charge for dhgate's 20.00-30.00 pieces.
Keep your eyes peeled!
I have the 186 but no evo. There is 7/8" between the can and inside of the Gong. With an ash catcher in the 186, I measure 1" between the can and the stem of the AC.Does anyone that has a GB-186, the yingmin stereo matrix, know if there is enough space around the 18mm female joint to fit an evo? Im looking for more volume and diffusion for my incoming vape.