• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

xEsoteric92

Well-Known Member
I just received the GB-187 replacement from Yingmin5, I'm very happy with it, although not flawless like a piece 10x its price, it is very nice nonetheless.
Thank you Yingmin.

if you dont mind me asking what exactly is wrong with that particular piece or what would have been more ideal or realistic compared to the advertising picture? not that im worried but based of most the replies I have read, I ordered mine a couple days ago as well.. Made a bit of an effort to try and sweet talk promising a great review if the piece I got was up to par with how it was advertised. I merely got a "dont worry my friend, order now i find a good one for u" I read a few spots on this forum that one of the issues was that the joint that holds the bowl, or the dwarr joint, whatever its called can be a bit lower then expected as far as suction. Hoping it all turns out okay tho, should post pictures on your free time.

Still havent seen any tracking info although it does say shipped, really excited and I would be lying if I said I wasnt expecting a superb quality piece for the price, I am real good at taking care of my things so I'd like to think I'll have this for many years to come. If it is as advertised and not like a big mac with the photoshop edit; ill definitely recommend and buy again.

Anyone know where the cheapest places to guy glass adapters are? Haha cheap bastards I know, some are on a way smaller budget then most so dont judge assholes ^^
 
Ok here is a video of the DO-Q. I have broken my no video rule by doing this. I hope it is helpful. Also, in regards to a few questions being asked it is taller than the DO-20 but much smaller than something like a GB-186. The glass is thick enough. It looks strong. It does not take much to get it going. There is a small delay while the tornado forms but it only requires a smooth pull similar to the other D0-20 series. Actually, the neck and can look the same as the Do-20-T


Some images;

2gxk3zt.jpg


j6trtc.jpg


281v68z.jpg


szh14z.jpg
 
Last edited:

xEsoteric92

Well-Known Member
Ok here is a video of the DO-Q. I have broken my no video rule by doing this. I hope it is helpful. Also, in regards to a few questions being asked it is taller than the DO-20 but much smaller than something like a GB-186. The glass is thick enough. It looks strong. It does not take much to get it going. There is a small delay while the tornado forms but it only requires a smooth pull similar to the other D0-20 series. Actually, the neck and can look the same as the Do-20-T


think we see why you broke your rule, that pull is sweet
 

mestizo

Well-Known Member
if you dont mind me asking what exactly is wrong with that particular piece or what would have been more ideal or realistic compared to the advertising picture? not that im worried but based of most the replies I have read, I ordered mine a couple days ago as well.. Made a bit of an effort to try and sweet talk promising a great review if the piece I got was up to par with how it was advertised. I merely got a "dont worry my friend, order now i find a good one for u" I read a few spots on this forum that one of the issues was that the joint that holds the bowl, or the dwarr joint, whatever its called can be a bit lower then expected as far as suction. Hoping it all turns out okay tho, should post pictures on your free time.

Still havent seen any tracking info although it does say shipped, really excited and I would be lying if I said I wasnt expecting a superb quality piece for the price, I am real good at taking care of my things so I'd like to think I'll have this for many years to come. If it is as advertised and not like a big mac with the photoshop edit; ill definitely recommend and buy again.

Anyone know where the cheapest places to guy glass adapters are? Haha cheap bastards I know, some are on a way smaller budget then most so dont judge assholes ^^
Yes, that's exactly right, the Dewar joint was recessed, but that was not the problem, the joint itself was oval due to (my guess) too much heat when doing the weld.
Pictures won't really show much, but I shot a video and sent it to Yingmin, on the video I was blowing into the mouthpiece while holding the bowl in the joint and dish soap around it, and you could see bubbles all around, every time I blew on it. It was a bad seal, and as far as I'm concerned I'm the only person who has received one with this particular problem, so I shouldn't be worried about it if I were you, my replacement was really well made and I can't believe the small amount of money I paid for such a great piece of glass.
 

ataxian

PALE BLUE DOT
Yes, that's exactly right, the Dewar joint was recessed, but that was not the problem, the joint itself was oval due to (my guess) too much heat when doing the weld.
Pictures won't really show much, but I shot a video and sent it to Yingmin, on the video I was blowing into the mouthpiece while holding the bowl in the joint and dish soap around it, and you could see bubbles all around, every time I blew on it. It was a bad seal, and as far as I'm concerned I'm the only person who has received one with this particular problem, so I shouldn't be worried about it if I were you, my replacement was really well made and I can't believe the small amount of money I paid for such a great piece of glass.
Link?
 

ataxian

PALE BLUE DOT
If you mean a link to the video, it was shot with my Iphone and I email it to him. I confess I'm not computer literate, If anybody PM me with instructions on how to post it, I'll have no problem.
Link so I can buy whatever your talking about?
What item?
 
awh shame it isn't 18mm. some cheap hydratubes for the cloud would be awesome XD

Agreed. As a glassblower, I still realize the need for lower end glass, and an affordable 19mm hydratube is definitely something the market is hurting for. Give Kathy a month and maybe we'll see one. The presence of the 14mm hydratube means they have a factory with knowledgeable workers, and there's zero reason why the couldn't do the same thing in a 19mm setup. Some American or European glassworker probably got paid in lobster and hookers to divulge all these techniques, but that's another story.

That being said, I hardly use my Hydratubes and much prefer a tabletop bubbler. :2c:

Seperate question for you guys, from someone who hasn't looked at this thread in about 1/4 of a year: how many points of diffusion does the D020-D offer? It's hard to tell from the photographs.
 
Last edited:

ataxian

PALE BLUE DOT
Ok here is a video of the DO-Q. I have broken my no video rule by doing this. I hope it is helpful. Also, in regards to a few questions being asked it is taller than the DO-20 but much smaller than something like a GB-186. The glass is thick enough. It looks strong. It does not take much to get it going. There is a small delay while the tornado forms but it only requires a smooth pull similar to the other D0-20 series. Actually, the neck and can look the same as the Do-20-T


Some images;

2gxk3zt.jpg


j6trtc.jpg


281v68z.jpg


szh14z.jpg
dhgate doesn't offer this right?
 

rgrig

Well-Known Member
First time poster, long time lurker. Thanks so much for the wealth of knowledge and the simply awesome vids.

Just thought I'd throw this in the mix. My LHS has lots of DHgate pieces. Last night I stopped by to find knockoff Hamm Exo-diffys for 89.99. That is typically what they charge for dhgate's 20.00-30.00 pieces.
Keep your eyes peeled!
 

wilvape

Well-Known Member

momofthegoons

vapor accessory addict
if you dont mind me asking what exactly is wrong with that particular piece or what would have been more ideal or realistic compared to the advertising picture? not that im worried but based of most the replies I have read, I ordered mine a couple days ago as well.. Made a bit of an effort to try and sweet talk promising a great review if the piece I got was up to par with how it was advertised. I merely got a "dont worry my friend, order now i find a good one for u" I read a few spots on this forum that one of the issues was that the joint that holds the bowl, or the dwarr joint, whatever its called can be a bit lower then expected as far as suction. Hoping it all turns out okay tho, should post pictures on your free time.

Still havent seen any tracking info although it does say shipped, really excited and I would be lying if I said I wasnt expecting a superb quality piece for the price, I am real good at taking care of my things so I'd like to think I'll have this for many years to come. If it is as advertised and not like a big mac with the photoshop edit; ill definitely recommend and buy again.

Anyone know where the cheapest places to guy glass adapters are? Haha cheap bastards I know, some are on a way smaller budget then most so dont judge assholes ^^

@xEsoteric92 calling people "assholes" on this forum isn't going to fly. Please reacquaint yourself with our rules, especially the "Be Nice" section.
 
Top Bottom