Discontinued VapeXhale Cloud EVO

macbill

Oh No! Mr macbill!!
Staff member
Where are you guys getting these whip adapters?

I made mine out of parts hanging around my house. StoneMonkey said VapeXhale will be marketing all types very soon.

stonemonkey55 said:
"We will have adapters for traditional 18 and 14.4 mm waterpipes and adapters for rigs that feature 10, 14, and 18 mm male joints."
 
Last edited:
macbill,
  • Like
Reactions: Hexi

Hexi

Well-Known Member
Whip adapter, $8.99 shipped:


http://www.ebay.com/itm/18MM-MALE-1...689?pt=LH_DefaultDomain_0&hash=item3a8ee29351

Ssv tubing fits right inside the 18mm male part,
or even use a ssv/dbv wand to keep the tubing further from the heat.
There are also adapters with room for filter/fiber material,
for easy reclaim and longer whip life.

That's similar to my core piece. Basic adapter from PVape, connected to a thick diameter medical grade silicone tub


Saw some interesting ones on PlanetVape
MultiWay-45mm-coonector-double1394416117531d19f536904.png

and this?

"VapeExhale" version?????!!!! (sold out)
VapeXhale Cloud GonG Water Tool Adapter

cloud-EVO-GonG.png
 

ocbubble

Member
My VapeXhale came in the other day and I love it! Only problem that I have is that the vapexnail doesn't stay stable when I use the EVO as an attachment to another rig. Any suggestions to keeping it stable when it's flipped over?
 
ocbubble,

SD_haze

Well-Known Member
My VapeXhale came in the other day and I love it! Only problem that I have is that the vapexnail doesn't stay stable when I use the EVO as an attachment to another rig. Any suggestions to keeping it stable when it's flipped over?
VapexNail can not be used when flipped over!


edit: for using the VXN with regular rigs, they're coming out with an adapter.
"We will be coming out with our own adapter kits as well. After playing around with a few different homemade versions, we have found the proper angles for the adapters to work as seamless as possible. We will have adapters for traditional 18 and 14.4 mm waterpipes and adapters for rigs that feature 10, 14, and 18 mm male joints."
 

Seek

Apprentice Daydreamer
I think an all-glass heater is much more important then all-glass delivery if you want pure tasty hits. And it has still got that.

edit: Also I think the silicone is not going to get hot after one or few nails.
I could tell from the videos you don't pull as much air through as when vaping flowers.
And when using flowers, you don't have to use the whip. You just flip the unit.
 
Last edited:

Pickz

Vapes on vapes on vapes!
I get the butane test as well when using the VXNail, but not too bad. Like others have said, with less material I get less of that taste. On a sad note I just broke one of my VXNails :rip:. It was so minor too, but it must have just fallen in the right way. I had it standing in a 18mm male to 14mm female adapter like this:
$T2eC16VHJHwFG1o5Cs77BSU3ub4K4w~~60_35.JPG

Funny enough with that picture that I just pulled off of Google, that's what happened with my VXNail. I had it standing in there and it tipped over from on top of a book (about an inch off the ground) on to the ground. It wasn't hot or cold, but room temperature. I had a dab sitting in it ready to place in my EVO and hit. It shattered right along the slit near the bottom on impact :cry:. To be honest that is a weak way to go for a $25 item that is so small, but it could have landed in just the wrong way for all I know. I don't have access to concentrates regularly so it's been fun, but I don't think I'll buy another nail for the time being. I had bought 2 (when you could buy them individually) right when they came out, but I don't need 2 more and don't want to hassle with trying to get another single nail.

Don't get me wrong I loved my Cloud, I love my EVO, and I love the VXNails. This is just a caution that they are fragile. I suppose that could be assumed with glass though. I will be more careful with my remaining one. I'm sure it will get plenty of use.

Edit: Wow, I managed to drop my other nail and break it. :doh: This time it was all my fault. That was the last one I had so that was a fun venture while it lasted, but I will be holding off buying more for a while. Back to the double cap or tossing in the oil with some herb.
 
Last edited:

macbill

Oh No! Mr macbill!!
Staff member
Just got my nail last week. Holy cow! This thing is amazing and RIPS huge. Sucks you can't turn it upside down but gives me more incentive to buy a new hydratube.

Also, StoneMonkey mentioned adapters soon to be available so that any device can be a "bottom".
 

JD13

New Member
I just combusted with a small bit on hash on very low temp (9 oclock) with the VXN. There is a burn mark on the VXN and smoke came out of the unit when I took it out. Ive tried looking inside in the light but I cant really see anything too sketchy. Has anyone experienced this / do I need to be worried about damage to the bamboo?
 

f2j

Chaque jour est une chance
Hey guys, I couldn't find the European version (220v) on the VX website. After a brief search on FC, I found a post from Stonemonkey (January 2014) stating that they were finishing the product (updating firmware essentialy), and that it should be then launched right after that.
Does someone know if an international version is going to happen? If so, when?
(These pretty little things are quite expensive so i've got to save some money before)
 
f2j,

Mister G

Deceptively Old Fart
Hey guys, I couldn't find the European version (220v) on the VX website. After a brief search on FC, I found a post from Stonemonkey (January 2014) stating that they were finishing the product (updating firmware essentialy), and that it should be then launched right after that.
Does someone know if an international version is going to happen? If so, when?
(These pretty little things are quite expensive so i've got to save some money before)

You have a lot more reading to do.... :evil:
 
Mister G,

jeff

Well-Known Member
Hey guys, I couldn't find the European version (220v) on the VX website. After a brief search on FC, I found a post from Stonemonkey (January 2014) stating that they were finishing the product (updating firmware essentialy), and that it should be then launched right after that.
Does someone know if an international version is going to happen? If so, when?
(These pretty little things are quite expensive so i've got to save some money before)


Looks like one day soon. http://fuckcombustion.com/threads/vapexhale-cloud-evo.11357/page-181#post-603296
 
jeff,

f2j

Chaque jour est une chance
Thanks, seems like I didn't see that post. Any idea what the retail price would be in europe ? There's so many pages to read ^^
 
f2j,

bassplayer

Well-Known Member
I'm waiting on my custom HT for the VapeXNail, rigged up some Herbalizer tubing as shown above with two VaporBrothers 18mm adapters and used my standard pieces, the VapeXNail is amazing! Has to be on par with the e-nail but even lower temp and more flavor - first couple times I ended up putting in far too much material than needed :ko:

I highly recommend the VapeXNail for those on the fence about it.
 
Top Bottom