Herr_Dampf
Well-Known Member
That first one looks kinda sweet. Tofakoro Recycler. 
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
tennstrong
Well-Known Member
Not quite a water test, forgive me.
Mister G
Deceptively Old Fart
The bottom one looks like the hitman double barrel but with a vortex upper chamber. If that is so, mE WaNT!!!
The inputs and there are two of them, don't really look vortex friendly though.tennstrong
Well-Known Member
I'd be concerned about the size of the uptake tube's width/vertical length vs the original double barrel, I could be wrong though with high enough water levelsThe bottom one looks like the hitman double barrel but with a vortex upper chamber. If that is so, mE WaNT!!!
snackmaster
Well-Known Member
I'm throwing cash at the screen but nothing's happening!
Seriously want to see if anyone jumps, I'd be interested to see how the quality is before I jump
Last edited by a moderator:
HugieLewis
I'm not an expert but I have a strong opinion
Well ladies and gents here is the D020D chasing ghosts edition. For my first try I went about as simple as possible but after messing around with it for a bit I feel confident that I can do some more complex designs. With more practice of course. Anyshits....pics or it didn't happen right?
ataxian
PALE BLUE DOT
Don't know about your location, but for europeans Blaze pieces can be pretty cheap.
I own their knock off version of the Möbius Clear Matrix, around 85 euros (yeah, not as cheap as Ali, but you get propper QC). It's a rather large can, but they also offer smaller ones like their 9-arm perc and the showerhead. Those are cheaper as well. Except for the worked showerhead of course
more pics at: http://fuckcombustion.com/threads/r...-your-new-pieces-here.522/page-57#post-592597
Pictures & glass by @vakedcow
You have a nicer collection however I make what I have work.
At least I have Snoop Doggy Purple Kush!
Last edited:
That is really cool. Congrats! PacMan was the correct choice. I want a Ms. PacMan one now for my 187!Well ladies and gents here is the D020D chasing ghosts edition. For my first try I went about as simple as possible but after messing around with it for a bit I feel confident that I can do some more complex designs. With more practice of course. Anyshits....pics or it didn't happen right?
olivianewtonjohn
Well-Known Member
Can anyone say how the solo is through the yg-187? How is it through the d020-d?
jambandphan03
in flavor country
well, I am just never going to stop am I... got one of those inline ashcatchers (18mm) and another mini-recycler ordered... wonder if I'll get green or blue...
http://www.dhgate.com/store/product...-circle-water-glass-percolator/183012721.html
and this one.. so cute
http://www.dhgate.com/store/product/new-black-small-bong-mini-water-pipe-pocket/190895046.html
http://www.dhgate.com/store/product...-circle-water-glass-percolator/183012721.html
and this one.. so cute
http://www.dhgate.com/store/product/new-black-small-bong-mini-water-pipe-pocket/190895046.html
ataxian
PALE BLUE DOT
The second one I ordered today as well.well, I am just never going to stop am I... got one of those inline ashcatchers (18mm) and another mini-recycler ordered... wonder if I'll get green or blue...
http://www.dhgate.com/store/product...-circle-water-glass-percolator/183012721.html
and this one.. so cute
http://www.dhgate.com/store/product/new-black-small-bong-mini-water-pipe-pocket/190895046.html
I plan to use this with the LOTUS!
Dangus
Yeah, well, that's just, like, your opinion, man.
@jambandphan03 & @ataxian - I think y'all will dig that little rig!
It *might* be a bit tight for the lotus, but for dabbing I am absolutely loving it.
CHeers!
It *might* be a bit tight for the lotus, but for dabbing I am absolutely loving it.
CHeers!
jambandphan03
in flavor country
Yeah, I'm crossing my fingers that it's JUST enough room to stick lotus on there, I found the simplest way is to use a bit of 1/2" silicone tubing as an adapter, but then that was with a 14mm, might have to stack another layer of smaller tubing inside the 1/2" to make it fit the 10... I'm sure I'll post about what ever I come up with. I found that the first Kathy recycler I got, with added stem and low-pro adapter makes a really good match to the lotus. Speaking of, if you remember I noticed a small air leak in one of the welds of that first recycler I got (pictured below) well, I got some aquarium silicone, a pretty big tube for about $6, and it took the tiniest dabs of it to seal the breech. It seems air tight now, but I will let it fully set up for the recommended 48 hours... here's a pic with my mods... you can never see enough glass porn...
This is where I had to repair the weld, where the U shaped tube connects to the bulb/vortex. Was such a tiny hole/crack it was really hard to see. Seems good now.
This is where I had to repair the weld, where the U shaped tube connects to the bulb/vortex. Was such a tiny hole/crack it was really hard to see. Seems good now.
Anonymouse
Sith I care
The bottom one looks like the hitman double barrel but with a vortex upper chamber. If that is so, mE WaNT!!!
The drain for the vortex chamber isn't at the bottom though, it's on the other side to the inlet and almost as high up the side of the chamber, forming a little reservoir in the base where the drain should be. Looks like it not only won't vortex, but it'll also keep some water trapped in that reservoir between pulls. :c
Herr_Dampf
Well-Known Member
Yep, that is one nice little piece. Still, 100 CAD shipped, no deal
Not mine, have to do some cleaning, will upload my collection to the appropriate thread later on.
Mr. Gweilo 420
Dude
I just got a call from the courier service and they have left my replacement GB-186 with my doorman. I will be able to test it out in a couple of hours I'm really hoping this one is good. For anyone concerned about the quality/reliability of Yingmin, I have had one wrong model and one was received broken. He has followed through with replacements both times
I'm really hoping this one is good. For anyone concerned about the quality/reliability of Yingmin, I have had one wrong model and one was received broken. He has followed through with replacements both times Herr_Dampf
Well-Known Member
His status shows "unapproved commercial account", and he posted from May 9 to May 11. Maybe he doesn't know how to get approval? Seems like his English was passable. Certainly better than my Cantonese
It would be great to have one of the China glass vendors here.
I think that is the problem here. If they are only vendors, not manufacturers, the only account they could open is a very limited one.
TERMS AND RULES said:
Last edited:
Mister G
Deceptively Old Fart
Um, no there is a drain at the bottom, maybe it's just hard to see in that picture, here's a different angle picture that shows the vortex chamber design better. The height the water needs to shoot is a definite concern, and it's hard to see if the inlet angles shoot the water into a swirl, but it's possible. Wish there was a video of it, does Hitman make one like this too or is this some kind of mutant?
And how tall/big do you guys think this is, can kinda estimate from the joint size, maybe 12"?
oli
Well-Known Member
Here's a couple new ones:
http://www.dhgate.com/product/1pcs-glass-pipes-glass-bubbler-glass-glass/193212453.html
Great Find, especially since I was thinking of getting this:
http://www.dhgate.com/product/1lots...r-glass-glass/189937548.html#cart_view-3-null
It be interesting to find out if both tubes arriving into the recycling chamber are dead in the middle or both a little to the right or left to create that vortex, cause I think if both are in the middle it will create some kind of conflict, but than again it could be really interesting too....
420democrat
Well-Known Member
well, I am just never going to stop am I... got one of those inline ashcatchers (18mm) and another mini-recycler ordered... wonder if I'll get green or blue...
http://www.dhgate.com/store/product...-circle-water-glass-percolator/183012721.html
and this one.. so cute
http://www.dhgate.com/store/product/new-black-small-bong-mini-water-pipe-pocket/190895046.html
I don't see joint size on the mini bub, but it's only 20 shipped I want one :/ what size joint do you know?
Doug
Just passing time
The joint size is 10mm, not 14mm as listed. I'm surprised on the craftmanship and function on this little guy. Once you get the water level right, you can pull as hard as you want.. That tiny little chamber will fill up with bubbles completely, and while there is no vortex action, it recycles very well. I can't believe how smooth and tasty the hits are. This thing is very, very small. I would recommend it, but I wish the glass was a little thicker.
I'll see if I can post a video over the weekend.
I'll see if I can post a video over the weekend.
420democrat
Well-Known Member
How do you hook a solo up to a 10mm joint? New to vapes with glass sorry if it's a silly question
