Discontinued The Persei Vaporizer for herbs and concentrates.

Mynameismud

Accessory Maker
Accessory Maker
If my memory serves me right it's called the nibbler d and it's for the kiss cart? Or Am I just making shit up right now lol
Not sure, he said the nibbler d was for globe style atomizers... Might still work on a kiss but I don't see a need for a specific nibbler just for a kiss when the okeanos is already there...

Anyone looking for a hammer top I see they are back up on w9tech clearance. A great buy for the Hercules especially black rods
 

215z

Well-Known Member
Can someone explain what the Hammer is, what it does, and whether I can use my SR-74 ceramic rods on it.
 
215z,

DieHard

Accessory supplier
Accessory Maker
Can someone explain what the Hammer is, what it does, and whether I can use my SR-74 ceramic rods on it.
Hammer Top is a Persei Top that has push-on push-off switch. It also has a 2:00 timeout. I'm not sure what if any other differences there may be. @THC SCIENTIFIC may be able to elaborate.
The Hammer rod is a ceramic rod heater attachment for use with the Bender (and other creative uses). I'm not sure how you would want to use a SR-74 rod with it. Theoretically you could use the Herc with the Hammer Top but if you forget and leave it on for the full 2:00 ....:(, so not really a great idea. Here's a pic of both
04nbXr0.jpg
 

MaxVapor

The Professor
You might be able to use the nibbler with a kiss but I don't have one thus never tried. So I could be making that up

That is what I do. I have an original Nibbler-X that is for the old style carts. First remove mouthpiece from Kiss. Second stretch one of the white silicone mouth pieces that came with the old carts over the top cone of the Kiss (as if you were going to use it as a mouth piece. Third remove the metal base with o-rings from the Nibbler-X. Last perch the Nibbler-X on top of the Kiss using the silicone mouth piece to seal the connection.

Photos are worth more words... This setup is my primary daily driver if I am home.

m55r.jpg


ukzv.jpg
 

c0rpse

Well-Known Member
I really want to buy a hammer top, but I haven't found a use for my hammer rod yet, and I have a sexy matte silver persei. The chrome wouldn't look too bad though...
 
c0rpse,

Fredster951

Well-Known Member
If you guys ever wonder how much we influence this industry take a look.


. Bootleg okeanos. Lol I see the glass shape resembles nibblers. The tip looks like the W9 tech tips. E juice tank and okeanos. Is this 601 thread? Damn copy cats! They sure copied your ideas G.
 
Fredster951,

warnerg54

Member
Nope and there was no dumping into the lower chamber of the Herc. As far as I can tell the Herc was completely unrelated to the incident. I had just loaded the Herc, screwed it on, hit the button and then smoke comes from the top and it smelled like burnt electrical. Pretty sure it was just a Persei top malfunction.

Unfortunately I've now got a freshly loaded Herc with some of that CO2 Organics Trainwreck and no Persei to vape it! Filed a ticket with W9 so hopefully they can get me back up and running ASAP.
Hmmm... W9 is typically really quick to respond to issues, as well as replacements/repairs...
 
warnerg54,

gudiss

Well-Known Member
@THC SCIENTIFIC my Persei just stops working :cry: now, my brother submits a ticket
vapvap-
is it the persei that is not working or is a herc not firing up on the persei? i was vaping away the other night with the herc while reading an article and realized it was not firing anymore. the led on the persei was glowing but nothing from the herc. i dissasembled the herc and saw the center post was pretty fouled up with oil, disrupting the connection. a little iso and bam- fired right back up.

gary, who is your patent attorney?
If you guys ever wonder how much we influence this industry take a look.


 
Last edited by a moderator:
gudiss,
  • Like
Reactions: DieHard

thevaf

Well-Known Member
gary, who is your patent attorney?

would it matter? has US patent law has ever stopped the chinese? Also, although it's the same concept, it could have been much more egregious. They took the same concepts and applied them in a slightly different form factor.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
gary, who is your patent attorney?

Does not matter, as no matter who it is, your going to spend millions fighting in court.

Is it worth having $300 units to pay for attorneys? no we rather have our clients happy with our product and spread the word around.

would it matter? has US patent law has ever stopped the chinese? Also, although it's the same concept, it could have been much more egregious. They took the same concepts and applied them in a slightly different form factor.

I agree.



On a side note, first electronic nail prototype is built and being shipped out monday.

Lets hope it will achieve 80% of our goals so we can fine tune it in the next two versions we have planned before release.
 
Last edited:

Vapvap

Well-Known Member
vapvap-
is it the persei that is not working or is a herc not firing up on the persei? i was vaping away the other night with the herc while reading an article and realized it was not firing anymore. the led on the persei was glowing but nothing from the herc. i dissasembled the herc and saw the center post was pretty fouled up with oil, disrupting the connection. a little iso and bam- fired right back up.

No I'm sure that the problem comes from the Persei, my brother tested all and he tried also with Kiss cart and it's the same problem............. but UP Tech will send us a new Persei top (Gary and Naomi was very reactive on W9 ticket :):tup:)
Now I have just to wait for the postman !
 

Jman5280

Well-Known Member
The wick in my KISS snapped in half but it still works. It actually works better now that the wicks form more of a U shape and covers more area. Is there any reason i shouldnt keep using it? I don't know why I am asking this but I want to make sure that having the inside of the wick exposed isn't an issue...

this is the second KISS wick I have snapped in half...fml
 
Jman5280,
  • Like
Reactions: 215z

ataxian

PALE BLUE DOT
Hammer Top is a Persei Top that has push-on push-off switch. It also has a 2:00 timeout. I'm not sure what if any other differences there may be. @THC SCIENTIFIC may be able to elaborate.
The Hammer rod is a ceramic rod heater attachment for use with the Bender (and other creative uses). I'm not sure how you would want to use a SR-74 rod with it. Theoretically you could use the Herc with the Hammer Top but if you forget and leave it on for the full 2:00 ....:(, so not really a great idea. Here's a pic of both
04nbXr0.jpg
Very nice post!

Speaking of the HAMMER:
I saw a video of a guy on weed maps using a device simular to the HAMMER.

Here's my ideal:

I use the HAMMER for my BENDER however why not just put the rod against the flower and vape away?
The CORE so I wouldn't have to deal with batteries.

If this works the vaporizer becomes obsolete!

Is this a crazy ideal?
 

MaxVapor

The Professor
Very nice post!

Speaking of the HAMMER:
I saw a video of a guy on weed maps using a device simular to the HAMMER.

Here's my ideal:

I use the HAMMER for my BENDER however why not just put the rod against the flower and vape away?
The CORE so I wouldn't have to deal with batteries.

If this works the vaporizer becomes obsolete!

Is this a crazy ideal?

I wonder if using the "shield" that came with the hammer (removed for use with Bender) would assist in such an endeavor...
 
MaxVapor,
  • Like
Reactions: ataxian

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Very nice post!

Speaking of the HAMMER:
I saw a video of a guy on weed maps using a device simular to the HAMMER.

Here's my ideal:

I use the HAMMER for my BENDER however why not just put the rod against the flower and vape away?
The CORE so I wouldn't have to deal with batteries.

If this works the vaporizer becomes obsolete!

Is this a crazy ideal?


With the core you can dial in the hammer temp and not combust. Thats the great thing about the Core.
 
Top Bottom