Discontinued The Persei Vaporizer for herbs and concentrates.

syrupy

Authorized Buyer
A limited edition double top and SR-142 Twerkules)

"Twerkules" © @DieHard
"rubber band" © @Caligula

yqeTLL8l.jpg
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
After much experimentation, daily use, trials, and user friendliness I have to say I am retiring my luna, and keeping the sr-74. I will have a more indepth review that hits on pros and cons, pics, and real life usage of the herc and the eo core. The fact I can use this on many types of mods and battery sizes, 18650 and 18350 also the fact I can clean torch rebuild replace things myself make this cart king by far. Drop a ball of wax in and I am set. Only have positive things to say about both oil vapes, but with w9 I feel secure in my purchases, happy with how my vape gives me my meds, and amazed by the customer service. Thank you again Gary, you help more than you know.

I will be waiting for your full review.
 

lockie

Well-Known Member
Any update on when the new replacement Persei tops are getting shipped and the bigger Okeanos baffles/other parts?
 
lockie,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Any update on when the new replacement Persei tops are getting shipped and the bigger Okeanos baffles/other parts?

The final prototype top is being manufactured, and the Okeanos air tube should be ready this week to confirm for production.


Diving into more detail on the Okeanos we have devised a new oring system that will seal the glass 100% no matter what the production variance is and no more need of any more Vaseline and we want to put this out together so it is a 1 time upgrade. Please bear with us and we will fix all issues you guys are having. The only things your going to need is the new oring, air tube and bottom sleeve to fix everything.


@DieHard you are too much. My hats off to you for your imagination.
 
Last edited:

Boilerboy51

Member
The final prototype top is being manufactured, and the Okeanos air tube should be ready this week to confirm for production.


Diving into more detail on the Okeanos we have devised a new oring system that will seal the glass 100% and no more need of any more Vaseline and we want to put this out together so it is a 1 time upgrade. Please bear with us and we will fix all issues you guys are having. The only things your going to need is the new oring, air tube and bottom sleeve to fix everything.


@DieHard you are too much. My hats off to you for your imagination.
Gary, has my Nibbler shipped yet? If not you better just keep it, won't be anyone here to sign for it...what's the hold up?
 
Boilerboy51,

ED421

Well-Known Member
Gary,
What's the word on the spring loaded pins getting put on the W9 site? My hercules is out of order without it! That dog won't hunt monsignor.
 
ED421,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Gary, has my Nibbler shipped yet? If not you better just keep it, won't be anyone here to sign for it...what's the hold up?

Last week we only had 1 person working the whole office and that was me with a helper on Tuesday and Thursday. Now that the whole crew is back from our east coast show we can contact you tomorrow once we contact you for the price difference we will ship it out. If you do not want it please submit a ticket along with your order number and we will cancel the nibbler x for you. I do apologize for any delays but some situations our turn around time isn't 48 hours.

@ED421 I'll have the center posts up today.
 
Last edited:

Ash057

Well-Known Member
I have faith the Okeanos will be fixed someday. The KISS heater is my biggest issue.
Its a pain to open up the Okeanos every few hits to reload and it's frustrating to see lots of oil just sitting under the heater.

Are there any updates on the Triton upgrade? That huge bottom chamber deserves something better than KISS!
My dream vape would be a Okeanos with at least 1/2g capacity and no leaks/clogs.


The final prototype top is being manufactured, and the Okeanos air tube should be ready this week to confirm for production.


Diving into more detail on the Okeanos we have devised a new oring system that will seal the glass 100% no matter what the production variance is and no more need of any more Vaseline and we want to put this out together so it is a 1 time upgrade. Please bear with us and we will fix all issues you guys are having. The only things your going to need is the new oring, air tube and bottom sleeve to fix everything.
 
Ash057,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I have faith the Okeanos will be fixed someday. The KISS heater is my biggest issue.
Its a pain to open up the Okeanos every few hits to reload and it's frustrating to see lots of oil just sitting under the heater.

Are there any updates on the Triton upgrade? That huge bottom chamber deserves something better than KISS!
My dream vape would be a Okeanos with at least 1/2g capacity and no leaks/clogs.

I was about to post these up as i just got word from our production engineer that hes made the prototypes.

The center post is now fully capable of being disassembled.





Fully Assembled.





Semi Assembled.





Full Assembled.





Now folks this is the a Double oring set up, this isnt the final solution for the leak proof design we are talking about. There is white oring you see on the base this is a fitment test atm we are doing and once done we will have it for everyone who has the older Okeanos and the newer ones will come with it.

The upgrade kit will include the new oring. The new Center air tube, and this bottom tube to ensure no more oils getting into the air tube.



You guys asked and its all here, ready to be finished off, and once done ill have it up for anyone who wants to get it.




@Caligula

Yes the new top might also get an extra feature.

But for now the New PErsei tops will have the following features.


Center Positive pin that is now capable of handling the Hercules and anything else we can throw at it.

Electronics that now can handle anything we can or are willing to throw at it.

Most likely a button that is way better then the last ones.

And most probably maybe possible likely a part that will just say fuck it i give up and im buying a Persei ( for some thats buying a Persei again )
 
Last edited:

mutten840

Well-Known Member
That looks like it is going to turn the Okeanos into the Herceanos :rockon:

Cannot wait to add this bad boy to the collection.
 
mutten840,
  • Like
Reactions: Caligula

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
That looks like it is going to turn the Okeanos into the Herceanos :rockon:

Cannot wait to add this bad boy to the collection.

Just wait for the Triton.



@Ash057 also for the Triton we are waiting for the one part that will make it work like a charm. Just takes time, but i guarantee you we are the quickest manufacturer that gets things done.
 
Last edited:

vaporchaser420

Active Member
I was about to post these up as i just got word from our production engineer that hes made the prototypes.

The center post is now fully capable of being disassembled.





Fully Assembled.





Semi Assembled.





Full Assembled.





Now folks this is the a Double oring set up, this isnt the final solution for the leak proof design we are talking about. There is white oring you see on the base this is a fitment test atm we are doing and once done we will have it for everyone who has the older Okeanos and the newer ones will come with it.

The upgrade kit will include the new oring. The new Center air tube, and this bottom tube to ensure no more oils getting into the air tube.



You guys asked and its all here, ready to be finished off, and once done ill have it up for anyone who wants to get it.




@Caligula

Yes the new top might also get an extra feature.

But for now the New PErsei tops will have the following features.


Center Positive pin that is now capable of handling the Hercules and anything else we can throw at it.

Electronics that now can handle anything we can or are willing to throw at it.

Most likely a button that is way better then the last ones.

And most probably maybe possible likely a part that will just say fuck it i give up and im buying a Persei ( for some thats buying a Persei again )

I haven't posted in a while, but hearing the good news from gary I can't wait for the upgraded parts, I loved my okeanos but I had issues many of which others have mentioned but I choose a company that main slogan is "we innovate" and I realized that might put me at risk as being a "beta tester", for me I love the fact that gary and the uptech crew are working their asses out coming up with the best possible product while, always thriving to make it better, if there was one ultimate product then the vape game would be over, complete dominance, but everyone interpretation of what being "ultimate" is completely subjective, but look at this way, if one day the holy grail/ excaliber vape that can do it all eventually came out, the kind of vape no one could say "oh you should have done this", honestly who do you think is gonna come out with it?, in the mean time I happily be a "beta test" getting well medicated off my ass laughing at those complainers , and no I'm not a super rich guy that can throw away money, but I'm wiling to pay for someone with this level of commitment, how often are those other guys participating in this community.
p.s. I'm not here to suck up to anybody or be a uptech only fan, one of my favorite vapes is the pinnacle pro and yes I realized its fault but its marked all of my check marks as a awesome vape, as does the Hercules, me I'm a truly a fan of vaping and medicating I don't care how I get there, I just want to get there and I am also a heavy medical user of mm for over 15 years and my tolerance is high, if I could afford it I would medicate a 1/8 of c3po moonrocks and a gram of solvent free THC such as the ones made by BAMF, innovative extractions, or "the clear" each day if I could afford it, btw the last portion of my consumption is to give someone who medicates to that degree their 2 cents and opinion, thank you for reading, and this post is a response to all the complainers, don't get me wrong as a American, and also as someone who is spending their hard damn working money, everyone has every right to complain, I'm just saying I like the post that gets me excited, I think other may too.
Keep innovating like a true boss don't worry about the complainers
btw I think I read something about new fangled updated tops, are they out yet, cause I sent mine recently for repair and I got back a top with a protruding button, but I haven't read any post of anyone else mention it, or did I just not look hard enough?
 
Last edited:

herbivore21

Well-Known Member
So the arrival of my Persei is imminent. My xtar VP1 is set up and waiting to charge a bunch of various AW batteries too.

I have a series of questions I was hoping to get answered before my new vape tool arrives *bookmarks this post*:

1. How do I best go about loading up the herc sr74 with shatter and QWISO oil respectively at 3.7v? I have glass and titanium dab tools and will have the hammer top and several torch lighters at my disposal.
2. Can I load less than 1g in the bender attachment and get good results?
3. How long does a full 1g load of buds in the bender deplete (ie: does it spend your buds more quickly than other vapes)?
4. Am I able to rig up a connection between my herc/kiss carts and my bubbler using a 18mm-14mm reducer and some silicone sleeves from e-nano gongs? @Caligula I'm lookin' at you here!

Cheers :D
 
herbivore21,
  • Like
Reactions: Caligula
Top Bottom