mmafighterthe25
Well-Known Member
I had mine on an forgot, an has a cool screen saver on it. with like big color bubbles.
Discontinued The Herbalizer
- Thread starter nopartofme
- Start date
ScientifiK
Lifted Gamer
You can turn the unit ON/OFF with either *****therapy button. I'm not sure how long it takes but if you leave the unit running it will eventually shut itself off and display a screen saver. During a session I turn off/on the unit several times while keeping the lid open.
Been Vapin
Fringe Class
Replaced another stock Herbalizer bag with a Reynolds turkey bag. I actually prefer these bags to the stock bags.
Also after replacing the bag my squeezevalve does not slide up any more. Hands free baby. Got 2 more to mod still.
Less is more with Herbie. I get better results when NOT packing a full bowl.
Also after replacing the bag my squeezevalve does not slide up any more. Hands free baby. Got 2 more to mod still.
Less is more with Herbie. I get better results when NOT packing a full bowl.
Been Vapin
Fringe Class
Cool chart I just found. Not sure how accurate the info is...
Vapodudule
Well-Known Member
how could they put smoke>vapor?
vade retro satanas
vade retro satanas
Polyrhythm
Well-Known Member
I took it as there will be more of those specific compounds released when smoking versus vaporizing, but not sure of that.
Vapodudule
Well-Known Member
I totally disagree with the statement. Combustion will always be more dangerous than vaporizing to me, i really believe in this statement.
benzene boiling point is 80°C! everybody talking about 200°C or so. Even if benzene is released when vaporizing, the danger have to be compared to the tar and combustion compounds which are way more dangerous.
The landscape of vaporizing really need serious studies, if serious people have serious money about it, i apply to be the serious scientist to do so.
benzene boiling point is 80°C! everybody talking about 200°C or so. Even if benzene is released when vaporizing, the danger have to be compared to the tar and combustion compounds which are way more dangerous.
The landscape of vaporizing really need serious studies, if serious people have serious money about it, i apply to be the serious scientist to do so.
olivianewtonjohn
Well-Known Member
I take it as them saying these compounds are released at combustion. I dont understand the difference between chart 1 vs chart 2?
Darb
Well-Known Member
Chart 1 is in Fahrenheit and chart 2 is in Celsius.
Slightly Medicated
(SliM) Iron Lungs
Last call for tips/tricks/suggestions or anything you might consider useful that you would want a fellow owner of the Herbalizer to know.
Reflections
Well-Known Member
I want one!
stickstones
Vapor concierge
The only thing I do is remove the bowl between hits to shake it and keep the fan from blowing through it, but that ain't much of an insider tip!
Do we even need to stir or shake the bowl when less than half full? I think I remember @Vitolo talking about the bud dancing in the bowl like the Extreme cyclone bowl.
Vitolo
Vaporist
I also said that the concentrate pad floated in there like a flying saucer when the fan is on... keeping the walls wax free.
While the weed will dance, the first hits will glue some of it up to the top screen... so even with a small amount I feel one shake is in order in the early stages of a session.
While the weed will dance, the first hits will glue some of it up to the top screen... so even with a small amount I feel one shake is in order in the early stages of a session.
lazylathe
Almost there...
I like to remove the bowl during hits and i sometimes blow through the mouth piece to loosen the herb stuck to the top screen and to mix the bowl a bit.
My only other tip is to get everything ready before you turn Herbie on!
This beast is fast and will always be waiting for you if you prep after turning Herbie on!
My only other tip is to get everything ready before you turn Herbie on!
This beast is fast and will always be waiting for you if you prep after turning Herbie on!
nigel
And shepherds we shall be,for Accuracy & Discovery
The Herbie is so bloody easy to use that I don't think there is a lot in this category. I think you got most of them.
The only thing I'd add is for all of the adaptations for glass/WT. I know @grokit uses some o-rings in coupling. @letter never sent uses a 14mm->10mm reducer. (I ordered the same thing.), @Vitolo uses... well about 100 different things.
There are plenty of other people I am forgetting to mention. Oh, @mvapes has a ton in there too. (Also, the squeeze valve, when taken apart, does accommodate a 18mm male GonG, albeit a hair loose. That's the kind of thing an o-ring would help with (there's an inner ring on the squeeze-valve), but it does work in a pinch if you need it.)
stickstones
Vapor concierge
My glass mating system is pretty simple. I used a 14mm stem from my POD that is short. I then used some silicone tubing to connect it to the bowl top. It ends up being 100% glass after the bowl.
ScientifiK
Lifted Gamer
Do you have a pic of this? Would like to see it if it isn't too much trouble
stickstones
Vapor concierge
I was gonna post a pic but I have used up my free uploads at imageshack. I guess I could try to not let that stop me!
Last edited:
lazylathe
Almost there...
I have been meaning to post these pics for quite a while now...
All the talk about glass connections and silicone tubing reminded me!
What i have done is use some two part condensation silicone material to build out the top of the bowl so that i have a high temp silicone mould of the HT joint.
The silicone i use is medical/dental grade and is rated to +300 Degrees Celsius.
The equipment we use it with injects a plastic material at around 400 Degrees C with no degradation or discolouration of the material.
This shows the two jars of silicone material, the Herbie bowl and the silicone joint that slides on and off.
Here is the silicone sleeve slipped onto the bowl.
And attached to Herbie with the Swagger LE hydratube, very stable setup!
And a close up of the joint.
I have been using the same silicone sleeve for a couple of weeks and it has loosened up nicely!
In the beginning lifting the HT would also remove the bowl, so with use it now has the perfect seal.
I have hit the bowl empty on high with fan assist and there is no taste from the silicone!
All the talk about glass connections and silicone tubing reminded me!
What i have done is use some two part condensation silicone material to build out the top of the bowl so that i have a high temp silicone mould of the HT joint.
The silicone i use is medical/dental grade and is rated to +300 Degrees Celsius.
The equipment we use it with injects a plastic material at around 400 Degrees C with no degradation or discolouration of the material.
This shows the two jars of silicone material, the Herbie bowl and the silicone joint that slides on and off.
Here is the silicone sleeve slipped onto the bowl.
And attached to Herbie with the Swagger LE hydratube, very stable setup!
And a close up of the joint.
I have been using the same silicone sleeve for a couple of weeks and it has loosened up nicely!
In the beginning lifting the HT would also remove the bowl, so with use it now has the perfect seal.
I have hit the bowl empty on high with fan assist and there is no taste from the silicone!
weedemon
enthusiast
well, i've been away from the forum for a while. it's all herbies fault!
I have not had an urge to see what's new in the vape scene.
hope everyone has been keeping well. just wanted to stop by and say im still loving my herbie a ton! i don't use anything else when I have a choice.
I have not had an urge to see what's new in the vape scene.
hope everyone has been keeping well. just wanted to stop by and say im still loving my herbie a ton! i don't use anything else when I have a choice.
lazylathe
Almost there...
Welcome back!!
I was wondering where you had disappeared to!
Herbie is still getting the job done with minimal fuss and time!
ScientifiK
Lifted Gamer
I have been meaning to post these pics for quite a while now...
All the talk about glass connections and silicone tubing reminded me!
What i have done is use some two part condensation silicone material to build out the top of the bowl so that i have a high temp silicone mould of the HT joint.
The silicone i use is medical/dental grade and is rated to +300 Degrees Celsius.
The equipment we use it with injects a plastic material at around 400 Degrees C with no degradation or discolouration of the material.
Here is the silicone sleeve slipped onto the bowl.
I have been using the same silicone sleeve for a couple of weeks and it has loosened up nicely!
In the beginning lifting the HT would also remove the bowl, so with use it now has the perfect seal.
I have hit the bowl empty on high with fan assist and there is no taste from the silicone!
If a 3D printer can do medical grade silicone, you have a nice little product to market here. I have little doubt you could sell these babies for a nice premium. I'll be first in line.