walrus
Well-Known Member
No. Definitely not.
Discontinued The Liquidizer Herb2Vapor System - Safety Butane Extractor & Mini-vaporizer
- Thread starter Liquidizer
- Start date
No. Definitely not.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Have you tried the mix in a dripper if you have one? Was just pondering how huge of a rip I could get off my igow-3, I can get some huge clouds already with a single coil around 0.9-1.0ohms with regular juice.
walrus
Well-Known Member
I have used ejmixed concentrate with my trident rda. My setup is usually around the same as yours, 1 ohm single coil. I normally just use it with shatter or wax but I use EJ juice as well. Get bigger clouds with the liquid (most likely from the pg/peg) but better effects from straight concentrate. I don't drip it like you would nic juice because my wicks for concentrate setup don't dip down into the juice well. I find that if your wicks are too long, the melted shatter just absorbs into it and causes lost product, it doesn't really wick bak up into the coil. When I drip EJmix I just coat the coil with 1 or 2 drops for 1 hit at a time. It would be interesting to set up a dripper like you would for nic juice and then just drip away.
@2clicker Weren't we just talking about mini aerotanks like, yesterday?
http://www.misthub.com/product/kanger-aerotank-mini-dual-coil-clearomizer/
Last edited:
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Yeah it got me wondering. My dripper is set up with a "nano dragon coil" which is really just the coil set diagonally, what makes it the "dragon" coil is the way it's wicked, the cotton wraps around all of the coil except for the topmost hole which is left open, instead of the cotton going through the coil, as seen here:
Works very well for regular juice, and you don't have to wick it from a tank or anything.
rabblerouser
Combustion Fucker
so i've soured a little bit on the kanger t3 tanks, it didn't really leak with thick liquid, but I've been wanting a weaker mix to try and slow consumption, I figure if it's not as concentrated i can't go through it as fast. But that got a lot of leaking when i tried it, i'm not sure how it leaked, but liquid disappeared somehow. Also, i tried burping the tank upside down and lost liquid out the mouthpiece too. So, i'm at least temporarily retiring the t3, i have a protank 3 mini coming, which is what i had originally thought i had ordered.
actually, good deal for anyone to try out kanger stuff. good prophets is running 20% off kanger products with code kanger right now, till the 11th. Couldn't afford much, but i got my mini protank 3 for $8 instead of $10. I've had good luck with them, placed 2 orders and they came quick.
EDIT:
I've used a full-size protank 3 with regular e-liquid for a week or 2 without much in the way of leaking, but they do seem to be a bit finicky with not wanting to be all the way full or too empty otherwise a get some gurgling and weaker vapor, i'm still getting a handle on it, but not much leaking at least.
actually, good deal for anyone to try out kanger stuff. good prophets is running 20% off kanger products with code kanger right now, till the 11th. Couldn't afford much, but i got my mini protank 3 for $8 instead of $10. I've had good luck with them, placed 2 orders and they came quick.
EDIT:
I've used a full-size protank 3 with regular e-liquid for a week or 2 without much in the way of leaking, but they do seem to be a bit finicky with not wanting to be all the way full or too empty otherwise a get some gurgling and weaker vapor, i'm still getting a handle on it, but not much leaking at least.
Last edited:
2clicker
Observer
keep us updated.
i think i will be trying the aerotank soon. it may be less prone to leaking.
walrus
Well-Known Member
@lewis6000 asked this in another thread but this is a more appropriate place for this discussion.
Read through this thread, there are lots of good examples of how to prepare liquidized concentrates. Here's a quick rundown of how I do it.
I usually do a ratio of about a gram of winterized concentrate to .75 ml of EJ mix. I find this mix to be pretty potent and works well in the ecig equipment that I use. You can experiment with more or less diluted mixes to find what works best for you. Heat the EJmix in a glass beaker/shot glass/etc in a double boiler setup with hot but not quite boiling water. Add the concentrate to the warm EJmix and let it melt down. Give it a good stir with a syringe tip. I heat the mix for 10 minutes or so, stirring occasionally. Draw it up into the syringe and load into your ecig cart. The process couldn't be simpler really.
Read through this thread, there are lots of good examples of how to prepare liquidized concentrates. Here's a quick rundown of how I do it.
I usually do a ratio of about a gram of winterized concentrate to .75 ml of EJ mix. I find this mix to be pretty potent and works well in the ecig equipment that I use. You can experiment with more or less diluted mixes to find what works best for you. Heat the EJmix in a glass beaker/shot glass/etc in a double boiler setup with hot but not quite boiling water. Add the concentrate to the warm EJmix and let it melt down. Give it a good stir with a syringe tip. I heat the mix for 10 minutes or so, stirring occasionally. Draw it up into the syringe and load into your ecig cart. The process couldn't be simpler really.
lewis6000
New Member
This is extremely helpful. Thank you. Have you ever used EJ Mix with Tetra Labs pure gold oil? I love that stuff cause it's so potent. I wonder how it would do with the EJ mix in order to stretch it a little further.
2clicker
Observer
im sure it would mix just fine, but it will def make it less potent the more you "cut" it. otherwise you could likely use the pure gold as-is.
lewis6000
New Member
I was just re reading this and had one more question. When you say "in a double boiler setup" do you mean to place the shot glass with the EJ mix in a pot of hot water? If so I would imagine that you wouldn't want too much water in ther. Maybe just enough to have the shot glass half way in the water?
lewis6000
New Member
I successfully made THC E Juice for my vape pen using crumble wax and EJ Mix. I noticed there's still a bit of a hash smell right after I smoke. Does anyone have any tips as to add something else to my mix that might mask the smell a little more?
rabblerouser
Combustion Fucker
The toasting when making your own oil works wonders. One batch had maybe 3:1 toasted to fresh and had a little smell. My second batch was all toasted and has almost no smell
lewis6000
New Member
Thanks for your response. Is this "toasting" process done when actually making the hash oil or when mixing it with the EJ mix in order to use it in the vape pen? Hoe does the process work?
rabblerouser
Combustion Fucker
Toast the plant material for day 20 mins at 220 is the general recommendation. Before making the oil. Not sure you can do much with existing oil. Maybe winterize it
lewis6000
New Member
I wonder if I could add a little flavoring of some sort to my wax & EJ Mix to mask the smell. Like one of the E cig flavors but with out the nicotine and all that crap in it.
rabblerouser
Combustion Fucker
maybe, but from my experience with e-cigs most of them have very minimal smell, not sure what would be worth trying to mask it, most people have told me the juice i use has a very faint smell of cookies or just something sweet, not as strong as smell as even the mild odor of the untoasted juice.
Edit: To clarify it's regular e-liquid that people if anything says just smells vaguely sweet. What I've made with the EJmix has a stronger smell with any untoasted in it, IMO. Stronger and better flavour with some untoasted though, but i like stealthy,.
GoGlass
Well-Known Member
Hello guys, i use Anyvape MiniDavide AND Kanger Mini PT2; both are great for vaping my E-JUICEs but ... after one or two days ... it leaks !!!! (sometimes on the outsides, and sometimes inside, onto the battery) !!!!!!!
Some reviews says that ALL AEROTANKS SOLVE THE PROBLEM OF LEAKING ONTO THE BATTERY !
So maybe the mini aerotank is our next challenger ...but same review claim that the aerotank is consuming more e-juice (reason is dual coil design) ....
If someone can think that we can mod the aerotank mini and make it one coil design, tell me please !!!!!!
I think it will be one of the best option at this time !!!!
Haywood
Onward Thru the Fog
@GoGlass: You might want to look at the "review" for the Mini ProTank 3 (not 2) I just posted in the Concentrates section. link The Mini ProTank 3 may turn out to be the best thing for your EJmix concentrates, though it's too early to know yet. As you can tell if you read my "review", I'm a big fan.
@2clicker is probably going to buy and test out an AeroTank mini, though I think he's going to use it more as an RDA than as a clearo.
@2clicker is probably going to buy and test out an AeroTank mini, though I think he's going to use it more as an RDA than as a clearo.
rabblerouser
Combustion Fucker
I, too, have been trying out the kanger mini PT3. Not quite as exhaustively as Haywood. But, No leaking so far in about a week and a half and 3 refills of about 1:3 oil to EJmix. Medium thin.
GoGlass
Well-Known Member
Thanks Haywood ! You have posted a link (DCD Pro Coil) with a possible solution !!! It seems that this company sells SINGLE coils that fit DUAL coils devices like the AEROTANK.
The only thing that i dont know is what is a "microcoil with an organic cotton wool wick"?
I'am new to the e-cig world, just own a Kanger mini PT2 (normal coils, silica wick).
Does the organic cotton is more durable, is it the same at taste ?
Thanks if you can explain me this briefly, i'am google also ......
Damm if the DCD Pro Coil can fit the new Aerotank Mini, i want to try one now !!!!!!!!!!!!!!!!!!
Maybe the end of our f**#@* leaking problems !!!
rabblerouser
Combustion Fucker
I think they use more e-juice AND produce more vapor because of the dual coil design.