• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued The Hammer Vaporizer

coflycasr

Well-Known Member
I use my Hammer at 100, have it heat up for 10 seconds, then start drawing around 20 I have a good amount of vapor and a tasty hit, then the next hits get a 3-10 second reheat.

When using the Vapolution how many hits do you get RUDE? And how long do you have to wait for the amount of vapor you desire.
I use the VAP2 every night. I usually just pack one long pellet and get 4 really tasty hits followed by another 3-4 spent hits. I preheat for ten minutes a 2 pm and then drop down to 12 for the first 5-6 hits and bump back up to 2pm for the last couple. My load is definitely dark brown when finished. What I have noticed is the herb that is closest to the bottum sometimes isn't as dark. I know the question wasn't aimed for me, but i use this vape every night and love its efficiency and taste
 

$unnyblaq

mist-or-vapor
So i finally got it down and wow this thing can perform. The hammer worked beyond my expectation i am in love. I cant believe this vape isn't talked about more its amazing. I already broke a stem i couldn't beilve it now im down to one :(. So i need to be way more careful with the next pair. My stems came with tiny silver screens that fit perfectly without shaping which i loved. But on there website i see some brass or copper lookng screens that have to be shaped and don't seem to fit. I hope it comes like the lock on stems i just got because the silver screens are fit and snug. Looks like im hooked and will be buying more glass from these guys. Good look to all those trying to win the competition hammer has going on its almost over.
 

Hammer Vaporizer

Well-Known Member
Manufacturer
Has anyone tried this vape at elevation, specifically Colorado. I know it has been tested in an airplane at 10k feet but just curious if anyone has used it frequently at elevation and what kind of reults were achieved.

We have recently had reports from users in Denver that the Hammer was working well there. It does run a little cooler at higher elevations due to the decrease in oxygen, so may require a few seconds longer to heat up fully.

We have yet to get any solid feedback from users about the Hammers performance at higher elevations (7000 ft +) in CO, but it should be ok based on our tests.

VIDEO0009_0000201825_grande.jpg


Also, just a reminder that there is about 36 hours left to enter the giveaway. We will be starting the 420 sale tomorrow as well. I will post details as soon as possible. :peace:
 

marcusog

Member
Just ordered one, chose it over the Solo because of all of the recent battery issues and because of all of the reasons to have a hammer! Can't wait for it to arrive so I can try it in the backcountry of Michigan, really needed the portability/robustness.
 

$unnyblaq

mist-or-vapor
So after 4 days of using as my daily driver my last stem broke. These things break super easy its kinda of annoying. I was just getting the hang when i twist it off and it cracked im so disappointed. I just bought this and now cant use it im pretty tight on cash right now. So hopefully the sale includes the lock on stems because even 10$ is a lot after i just dropped 77$. If not ill will be hammerless for awhile :'(. This unit rocks i love it but now i must wait to use again.
 
$unnyblaq,

paytonpenn

Level 30 Nature/Healer
You should check out some thin silicone from Underdog. Also formed screens.

http://underdogvapes.com/vape-stems/silicone-tubing

I use the stem case from the simple glass stems and have it cut to about 3 inches long for my two inch silicone shorties, I also have my cork in the white cap about halfway as I stash extra bowls behind it. I do have to use the cork in the cap to hold the silicone when it goes in the tube otherwise it gets stuck because the tube gets narrower further down.
 

$unnyblaq

mist-or-vapor
Thnx this looks good i will get this then. I like the look and you can choose thick or thin i think ill go with thick hope it fits well. Thnx for the help i appreciate it
 
$unnyblaq,

hoyo77

Well-Known Member
anybody use this butane...http://www.newportbutane.com/ I was at my LHS yesterday and the guy highly recommended. no odor, burns cleaner and hotter...I bought some...purged my hammer real good, filled it up and let it settle. I will admit, my hammer seemed to burn hotter, I had it on its lowest setting and I got some amazing FULL FLAVOR hits. I was enjoying it..raised the temp another notch and got some even bigger rips. I am loving this butane it seems to have made my hammer more enjoyable.
 

$unnyblaq

mist-or-vapor
So can i expect that sale at midnight? ;)
Yes can we im here dying to buy some stems. I just used my solo stem worked but not great.
anybody use this butane...http://www.newportbutane.com/ I was at my LHS yesterday and the guy highly recommended. no odor, burns cleaner and hotter...I bought some...purged my hammer real good, filled it up and let it settle. I will admit, my hammer seemed to burn hotter, I had it on its lowest setting and I got some amazing FULL FLAVOR hits. I was enjoying it..raised the temp another notch and got some even bigger rips. I am loving this butane it seems to have made my hammer more enjoyable.
Butane definitely makes a deference because i had colibri in my hammer burned good. I just but ronson just to try it, it works but i feel colibri was better.
 

Ace.357

Well-Known Member
I removed all the little screws on my Hammer to take a look inside the unit. Before I screw the device back together, I just want to make sure that all the internal parts are correctly in place. Can someone please post a picture of what the Hammer looks like on the inside?

TIA
 
Ace.357,

VAPEHUNTER

Well-Known Member
I just got back from a little trip so for the past week The Hammer has been my daily driver and it's really hard to find any flaws to this little vape. I know the torch sound can be a bit loud at full power and the butane might smell a little, but this can be easily overlooked when I no longer have to worry about my batteries being charged. Besides I think you have to accept the sound and smell of butane when you decide to buy a butane powered vaporizer.
I did make one small change, I took a couple of my extra gong screens and cut them down so they fit in the stems. With the finer screen I get very little herb particles stuck to the sides of the stem. This is good because I have now made it a habit to scrape the oil from the stems and put it in my little "Atmos" pen to get a nice oil hit.
I really seem to have my technique down now so the clouds I get are ridiculous. I also found the learning curve with The Hammer is rather small. Almost everyone who tried it were able to pull nice clouds with a little guidance, if anyone had real problems I was able to just hold it for them while they took there hit.
I also found myself warning my friends to be careful because The Hammer could hurt them. I don't think they understood what I meant until they tried it and almost coughed up a lung. But after the coughing stopped the next question was always the same, "Where can I get one and how much?"

So after 4 days of using as my daily driver my last stem broke.
@$unnyblaq I was happy to read you like The Hammer as much as I do but I was sad to hear you broke your stems. When I ordered my Hammer I also ordered extra stems. I can't let a fellow "Hammer Brother" suffer knowing I have more stems just sitting in my garage. PM me your address and I will send you a stem tomorrow, if you are in the U.S. If you are not in the states I'll find out how much shipping is. If it's reasonable (around $10-$15) I got you covered.
 
Last edited:

$unnyblaq

mist-or-vapor
@VAPEHUNTER Thnx man you are the best brother from other mother ever:rofl::rockon::tup:. I was wondering where you were haven't heard from you in a bit. I thought maybe you were over the hammer but glad to see you love it too. Me and you both have been putting our hammers through its paces i use mine daily. I hate waiting for my vapes to heat up but with the hammer its almost instant gratification. Since i will have to wait for my stems i guess ill use the trusty mflb till i can get back on my Thor. Im so excited to use it again i woke up to this so its a great morning already thnx again vapehunter you are the MAN!!!!
 

KidFated.

Unknown Member
So i went to go order some stems thinking they were on sale.. Never got the discount to work. $unnyblaq has me trippin that im gunna break more stems.
 
KidFated.,
  • Like
Reactions: $unnyblaq

$unnyblaq

mist-or-vapor
Lol no dont worry they are very fragile but i can put the blame on myself =p. But it doesn't hurt to have extra and i think we have to wait for the discount and see what @Hammer Vaporizer says. Im here with you on that @KidFated. im dying to see whats on sale:argh::rip:.
 
$unnyblaq,

KidFated.

Unknown Member
I disagree on them being "fragile" or im just pretty lucky.. But i think the stems will be on sale after contest. Thinking about that bundle of stems/GonG/screens and extra stems for fishin!
 

paytonpenn

Level 30 Nature/Healer
anybody use this butane...http://www.newportbutane.com/ I was at my LHS yesterday and the guy highly recommended. no odor, burns cleaner and hotter...I bought some...purged my hammer real good, filled it up and let it settle. I will admit, my hammer seemed to burn hotter, I had it on its lowest setting and I got some amazing FULL FLAVOR hits. I was enjoying it..raised the temp another notch and got some even bigger rips. I am loving this butane it seems to have made my hammer more enjoyable.
That is what I use, its great.
qYkF3z3.jpg

f89rwfd.jpg

EDIT:
All this brother talk I may have to get mine a Hammer on this next sale. He's been trying to steal one of mine. :nope:
 
Top Bottom