Discontinued The Persei Vaporizer for herbs and concentrates.

Vapvap · Mar 27, 2014

Hola Pickmita
You need to buy a Persei (2 batteries comes with), 2 more batteries 18350 (better), and the Bender. You better buy directly to W9, IMO.
The taste is one of the better I've tested.
The air comes from 4 holes but passes through the ceramic heater too.
It's a great choice :tup:

pickmita · Mar 27, 2014

Vapvap said:
Hola Pickmita
You need to buy a Persei (2 batteries comes with), 2 more batteries 18350 (better), and the Bender. You better buy directly to W9, IMO.
The taste is one of the better I've tested.
The air comes from 4 holes but passes through the ceramic heater too.
It's a great choice

Thank you!
Can I add the Nibbler on top of the Bender for water filtration or is it just for concentrates? One more question: how can I regulate the temperature of this setup?

DieHard · Mar 27, 2014

@pickmita You can get creative with the bender using a 18mm male gong and some whip tubing and an adaptor for the other end of the whip to fit your chosen water path.

Vapvap · Mar 27, 2014

pickmita said:
Thank you!
Can I add the Nibbler on top of the Bender for water filtration or is it just for concentrates? One more question: how can I regulate the temperature of this setup?

No for the Nibbler, just for concentrates
The temperature isn't regulate, but you only have to keep pushing the button, and when you feel hotter, you can release. Very easy

jambandphan03 · Mar 27, 2014

Looks like I'm getting my 3.7 Kiss kart today

looking forward to giving it a test drive... mailstalking :ninja:

for that signature delivery.

DaNi_DuB · Mar 27, 2014

Just burned through my last kiss cart last night :disgust:

. Can't wait to get paid tomorrow and buy me a herc

kaisersosay415 · Mar 27, 2014

How long did it last.

DaNi_DuB · Mar 27, 2014

kaisersosay415 said:
How long did it last.

This one only lasted about a week. The one before it, two weeks.

kaisersosay415 · Mar 27, 2014

Was that with heavy use

DaNi_DuB · Mar 27, 2014

kaisersosay415 said:
Was that with heavy use

I used the shit out of the first one, but with this last one I was pretty paranoid (used two tools to get the wax on the coil without touching it) and only used about 1g $50 wax and it still pussed out on me. If it turns out that the herc isn't what I'm looking for, my healthstone might just come out of retirement.

jambandphan03 · Mar 27, 2014

Just got my kiss kart and WOW it's so clean tasting compared to the other coils I've tried. Not much to it, did a first load, hit it twice to prime it then topped off. I'm glad it can be easily rebuilt when it dies. I got some kanthal wire, multimeter and waiting on a om cart reader to show up one of these daze from fasttech... still need to figure out how to use the multimeter, but I'm sure a few youtube searches will take care of that. running it with T1/17670 battery + adapters right now, it also fits perfectly on my AR battery (finally I have a use for that thing). I am already pretty blitzed from the first few hits and I wanna keep playing.
:ko:

Instant milking of the bubbler... :rockon:

I'm going to have to watch my tolerance with this one...

Dr. Soxhlet · Mar 27, 2014

I got my new Persei working! :spliff:

Thanks go out to Sleepin in CA for the 2.4 ohm cart and mouthpiece.
Also thanks for the advice from members and THC Scientific.
I''ll be reading the thread and lurking for awhile til I feel like I have something worthwhile to contribute.
Thanks again!!

DieHard · Mar 27, 2014

jambandphan03 said:
Just got my kiss kart and WOW it's so clean tasting compared to the other coils I've tried. Not much to it, did a first load, hit it twice to prime it then topped off. I'm glad it can be easily rebuilt when it dies. I got some kanthal wire, multimeter and waiting on a om cart reader to show up one of these daze from fasttech... still need to figure out how to use the multimeter, but I'm sure a few youtube searches will take care of that. running it with T1/17670 battery + adapters right now, it also fits perfectly on my AR battery (finally I have a use for that thing). I am already pretty blitzed from the first few hits and I wanna keep playing.
Instant milking of the bubbler... I'm going to have to watch my tolerance with this one...

Set the multimeter to ohms (omega symbol). Make sure your black lead is in the COM socket and the red lead is in the V (omega) socket. Touch one lead to the threads and one to the center contact. Digital meter will work best for this. For my meter, if the coil is bad there will be no change when I apply the leads. Or there will be a really high reading. (Higher number, more resistance . Too much resistance= no good contact)

jambandphan03 · Mar 27, 2014

Mine has a few more choices in the Om section...

DieHard · Mar 27, 2014

jambandphan03 said:
Mine has a few more choices in the Om section...

I see, yours is not auto-ranging. So, you would set it at 200 (right above the word COM) because you will not be reading in excess of 200 Ohms. If you want to test batteries, put it on DCV 20 (because you will be testing well under 20volts). Then red to positive black to negative.

ataxian · Mar 27, 2014

DieHard said:
I see, yours is not auto-ranging. So, you would set it at 200 (right above the word COM) because you will not be reading in excess of 200 Ohms. If you want to test batteries, put it on DCV 20 (because you will be testing well under 20volts). Then red to positive black to negative.

I coundn't help but see your reference to ZIG ZAGS!

When I was a teen I took pride in the FAT JOINTS I would roll. No Vaporizers at all that I knew of.

Now I can't smoke a joint if I wanted to!
The VAPORIZER has change my consumption greatly.

The BENDER is not that popular with some people. I love the F'KER.
Flavor is great and effects me like a joint however taste way better!

Wax before bed replaced all sleeping pills. The PERSEI is cool to me because of the automation. O' I almost forgot the effect.

No turning back!

DaNi_DuB said:
This one only lasted about a week. The one before it, two weeks.

rebuilt them! Then you will have 2!

it's only the wire needs replacing.
@Sleepin in CA knows how!

DieHard · Mar 27, 2014

@DaNi_DuB Page 747 has @Vapvap 's video and page 750 has my photo tutorial for rebuilding KISS carts. @Sleepin in CA has all the necessities (PM him ) or he can do it for you.

Hedonismbot · Mar 27, 2014

jambandphan03 said:
Mine has a few more choices in the Om section...

DieHard said:
I see, yours is not auto-ranging. So, you would set it at 200 (right above the word COM) because you will not be reading in excess of 200 Ohms. If you want to test batteries, put it on DCV 20 (because you will be testing well under 20volts). Then red to positive black to negative.

@jambandphan03 Also, when measuring resistance, touch the two probe tips together and see if you can get a 0 reading (0 means no resistance, a short). If there is any residual resistance you need to subtract that amount from your readings.

DieHard · Mar 27, 2014

ataxian said:
I coundn't help but see your reference to ZIG ZAGS!

When I was a teen I took pride in the FAT JOINTS I would roll. No Vaporizers at all that I knew of.

Now I can't smoke a joint if I wanted to!
The VAPORIZER has change my consumption greatly.

The BENDER is not that popular with some people. I love the F'KER.
Flavor is great and effects me like a joint however taste way better!

Wax before bed replaced all sleeping pills. The PERSEI is cool to me because of the automation. O' I almost forgot the effect.

No turning back!

Yeah there's no turning back that's for sure. But I still roll one every so often.

Now that I sit back and reflect, my first "vape" experiment was a ball of hash dropped on a hot car cigarette lighter coil back in the early '80s. LOL :lmao:

ataxian · Mar 27, 2014

DieHard said:
Yeah there's no turning back that's for sure. But I still roll one every so often.

Now that I sit back and reflect, my first "vape" experiment was a ball of hash dropped on a hot car cigarette lighter coil back in the early '80s. LOL

In the 70's we had some good flower colas. Being on the WEST COAST we had a quick plane ride to HAWAII. We use to put drops of honey oil on tin foil!
We got it from India!

Caligula · Mar 27, 2014

jambandphan03 said:
Mine has a few more choices in the Om section...

I have that same DMM. Its easier if you leave one of the probes in its "holster" when testing (just like you have it in the picture).

That way you keep one hand free to hold your cart.

kaisersosay415 · Mar 27, 2014

So quick question. When cleaning the to kiss. I can submerge the whole cart in ISO. Won't this mess it up. Any tips on cleaning would be appreciated.

DaNi_DuB · Mar 27, 2014

ataxian said:
rebuilt them! Then you will have 2!

it's only the wire needs replacing.
@Sleepin in CA knows how!

DieHard said:
@DaNi_DuB Page 747 has @Vapvap 's video and page 750 has my photo tutorial for rebuilding KISS carts. @Sleepin in CA has all the necessities (PM him ) or he can do it for you.

That's the plan as soon as I can figure out which Ti grd 2 wire to buy for 3.7. May just have to give in to kanthal *cough cough* @Sleepin in CA

THC SCIENTIFIC · Mar 27, 2014

We will have ti gr2 wires available soon.

DaNi_DuB · Mar 27, 2014

kaisersosay415 said:
So quick question. When cleaning the to kiss. I can submerge the whole cart in ISO. Won't this mess it up. Any tips on cleaning would be appreciated.

Simple, just drop it in ISO for a few hours, let it dry, then burn it till the ceramic turns white. Someone correct me if I'm wrong.

Discontinued The Persei Vaporizer for herbs and concentrates.

Well-Known Member

Well-Known Member

Accessory supplier

Well-Known Member

in flavor country

Vapor Enthusiast

Well-Known Member

Vapor Enthusiast

Well-Known Member

Vapor Enthusiast

in flavor country

SOLO Vaporized Cannabis is my Best Medicine

Accessory supplier

in flavor country

Accessory supplier

PALE BLUE DOT

Accessory supplier

Well-Known Member

Accessory supplier

PALE BLUE DOT

Maximus

Well-Known Member

Vapor Enthusiast

To Boldly Go Where No One Has Gone Before

Vapor Enthusiast