herbivore21

Well-Known Member
I thought those looked like my Nano! :D

Actually, using the Nano on setting 10 (without dimmer control) has darkened the wood somewhat, it is still perfectly intact and I really like the darkened maple burl, which now matches all my other furniture!

According to postal tracking, I will get to see the Nano in all it's fully adjustable temperature glory tomorrow! Suffice to say, my schedule has been cleared for the day so I get the chance to truly enjoy this beauty!
 

canj00digit?

All my days in a daze...
According to postal tracking, I will get to see the Nano in all it's fully adjustable temperature glory tomorrow! Suffice to say, my schedule has been cleared for the day so I get the chance to truly enjoy this beauty!

Good news, mate :) Should be a long day of testing :D



Re: cotton with concentrates. When using cotton I also would get a bit of browing if the heat was too high or cotton too close to the heater (organic cotton btw so maybe it contained something else also :shrug:). I could also definitely taste the cotton if it was heated too much.

Since I switched to surgical stainless (316l) steel wool I've obviously not had to worry about such a thing, it's reusable, cleanable, reclaimable and still quite cheap.
 

herbivore21

Well-Known Member
Good news, mate :) Should be a long day of testing :D



Re: cotton with concentrates. When using cotton I also would get a bit of browing if the heat was too high or cotton too close to the heater (organic cotton btw so maybe it contained something else also :shrug:). I could also definitely taste the cotton if it was heated too much.

Since I switched to surgical stainless (316l) steel wool I've obviously not had to worry about such a thing, it's reusable, cleanable, reclaimable and still quite cheap.

You betcha mate! It's going to be a good day tomorrow! :D

Listen to @canj00digit? on the steel wool, he sent me some of this with the Lotus and goodies I bought off him through the classifieds. I could never go back to cotton! Steel wool is the new cotton!
 

ataxian

PALE BLUE DOT
Well I just pulled the plug. Maple e-nano with 14mm all glass gong. This will be my first log. Can't wait :clap:
You will love it.
I like the maple because it matches my work benches in my wood shop! The other woods are great as well.
I would get a 2nd one however I have so much stuff already!

I have 18mm and 14mm wpa's.

My favorite one for me is the 14mm with a glass disc.

I just love this one with a water path.

The size of the NANO is perfect for glass pieces.

Heavy Bulky Vaporizer do not pair well with bubblers.
NANO's no problem!

Remember the size of the first cell phone?

The NANO is in front of the herd!
I'm sure you have a glass reducer for your bubblers?
18mm to 14mm.
CAISEN's are cool to set up as well (don't need this just fun)
OFzC9Hv.jpg

Just for fun!
 
Last edited:

as

Well-Known Member
nooo today is a dark day :( sadly my nano has a problem yesterday i went to hit it and it was cold on the wood the ss heater cover was still hot tho i touched it to see and it was to hot to touch but did not burn me my nano was set to 8 and had bin left on 8 since i swiched it on that morning i was thinking maybe i turned it down and then only just turned it back up i could not remember doing this but maybe i forgot

well just now the same thing happened and it was 100% bin on 8 for about an hour
the light was on both times this happened
i relay dont want to have to send my nano back as i live in the uk so it would be a pain and probs a month till i got my nano back and that long with out one will brake my hart :(
i have just switched the nano of and on to see if it will heat back up
and im just about to email @ACE OF VAPE about the problem

im thinking it must be a lose connection that is the problem?
ill open it up after i speek to andy

EDIT TO ADD: my nano has heated back up and after fiddling with the wire i think i have found my problem i belive it to be the same as what @herbivore21 as when i move the cored near the dial the light blinks

 
Last edited:

herbivore21

Well-Known Member
nooo today is a dark day :( sadly my nano has a problem yesterday i went to hit it and it was cold on the wood the ss heater cover was still hot tho i touched it to see and it was to hot to touch but did not burn me my nano was set to 8 and had bin left on 8 since i swiched it on that morning i was thinking maybe i turned it down and then only just turned it back up i could not remember doing this but maybe i forgot

well just now the same thing happened and it was 100% bin on 8 for about an hour
the light was on both times this happened
i relay dont want to have to send my nano back as i live in the uk so it would be a pain and probs a month till i got my nano back and that long with out one will brake my hart :(
i have just switched the nano of and on to see if it will heat back up
and im just about to email @ACE OF VAPE about the problem

im thinking it must be a lose connection that is the problem?
ill open it up after i speek to andy

EDIT TO ADD: my nano has heated back up and after fiddling with the wire i think i have found my problem i belive it to be the same as what @herbivore21 as when i move the cored near the dial the light blinks

Hi mate,

Do you own a multimeter that can test voltage and resistance (and some rubber gloves to protect from live AC power)? If so, connect your E-Nano to power, set your multimeter to test for voltage first. Attach the test pins from the multimeter to the two solder joins for the power cable coming out of the dimmer switch and into the main wooden part of the Nano. These solder joins are on the back of the printed circuit board inside the dimmer/temp control part. There are two screws on the back of this.

Take voltage readings at level 10, and level 1. Post these readings here.

As well, if you are confident and have replacement closed end crimp terminals, we can test the resistance of the heater after this.

In my experience, the heater is able to stand serious punishment. It can handle 240v for 10 mins (gets red hot, but still works perfectly after and retains it's original intended electrical resistance).

If your readings on the voltage coming out of the dimmer are not pretty close to 0V at setting 1 and 120V at setting 10, your dimmer is the culprit. Hope you work it out soon, no Nano left behind! hahaha

Also check the back of the circuit board for any burn marks of bad looking solder joins. It could be as simple a problem as resoldering the join as one other user ended up needing to do to fix his Nano.

EDIT: Be prepared for a video of my back in action Nano w/ 18mm adjust-a-bowl gong.

I just had my first hit on true level 6 with my new dimmer through my Luke Wilson piece. Use like seriously .05 or less of a gram in the bowl and continuous, big, great tasting clouds.

This is the best vaporizer I have ever used by a long shot!

The Adjust-a-bowl gong has definite cracking on the bottom of the ground GonG part however, and didn't have a silicone sleeve on it. I suspect since I got in super early on the 18mm ones that I have one of the first ones (if not the very first!). Already made myself a high heat sleeve for the GonG out of a silicone glove. It is a lovely neon green colour too with textured finger grips.

I think I will hxtal the gaps and the rough/sharpish surface at the very bottom of the GonG, should have it looking and working good as new!

New dimmer worked a treat, Andy even threw in the closed end terminals to connect the new dimmer with :D

Got the unit fixed within 5 mins of the delivery getting here. I am so glad I made this purchase!!! Huge thanks to @ACE OF VAPE for all the help, and as always, you guys for recommending this unit and helping out with troubleshooting it!

This is definitely my daily driver now, my Lotus will now be my Zombie Apocalypse survival piece (and also portable, I live in a real hippy town, noone cares if you look like you're toking on the grass). I can't see myself wanting to purchase a new vape again now :D
 
Last edited:

herbivore21

Well-Known Member
Here's a video of my newly resuscitated Maple Burl E-Nano doing some AVB from my Lotus (which I'd already taken 3 big hits from). The taste is somehow great, even with AVB, the clouds are perfect too, this video was also my first time getting a perfect one-hit sized bowl :D

Enjoy!

I am the vakedest I've ever been off AVB alone!

 

Tweak

T\/\/34|<
MysticVaper & rosedale

I'll try and take some snapshots tonight after work. I have both a regular and thick wall stems and GonG.


Yesterday I received my Baby Soda Bottles, love them. It's awesome that Andy sends out a case with each stem, but I feel these could take a bit more abuse and one of these can fit two GonG pieces in.

attachment.php


They are 1/2" longer than the ones that come with the PVHES, but still too short for my thick wall stem.

I've thought about picking up a pelican case to house my Nano + glass, but these will do for now.
 

Maine420

GROOVY GRANNY
These are the tubes I use for my solo stems, glad to see the nano stems can be stored there!
 
Maine420,

canj00digit?

All my days in a daze...
Here's a video of my newly resuscitated Maple Burl E-Nano doing some AVB from my Lotus (which I'd already taken 3 big hits from). The taste is somehow great, even with AVB, the clouds are perfect too, this video was also my first time getting a perfect one-hit sized bowl :D

Enjoy!

I am the vakedest I've ever been off AVB alone!


Great job on the video, mate. Love to see that milk. Especially in a nice piece such as the LW (was glad to hear it was just a wonky weld!).

That's a VERY impressive amount of extraction from the Lotus ABV... very interesting... I never tried something like that.
 

ataxian

PALE BLUE DOT
MysticVaper & rosedale

I'll try and take some snapshots tonight after work. I have both a regular and thick wall stems and GonG.


Yesterday I received my Baby Soda Bottles, love them. It's awesome that Andy sends out a case with each stem, but I feel these could take a bit more abuse and one of these can fit two GonG pieces in.

attachment.php


They are 1/2" longer than the ones that come with the PVHES, but still too short for my thick wall stem.

I've thought about picking up a pelican case to house my Nano + glass, but these will do for now.
I have a bunch of the smaller ones. This size is perfect.
Do you have a LINK?
 
ataxian,

herbivore21

Well-Known Member
Great job on the video, mate. Love to see that milk. Especially in a nice piece such as the LW (was glad to hear it was just a wonky weld!).

That's a VERY impressive amount of extraction from the Lotus ABV... very interesting... I never tried something like that.
Man I just vaped through 6g of Lotus AVB this afternoon in similar fashion. I am shoes on hands stoned! I can't believe how much more efficient the Nano is than the Lotus, which in turn is so much more efficient than my PNP was. It is great to know that what seems completely spent in the lotus will give me another good 2-3 milked up cans of goodness in the Nano :D

Now to get myself some cashish and buy my custom 18/14mm roasting tube for the Nano and let the real milk videos begin :peace:

Also, so stoked about it just being a bad weld in the LW piece too, held it out in the sun for a good 5 minutes yesterday afternoon on a scorching hot day and there was not a sparkle in site! I think I am gonna reinforce the join with Hxtal, I have it and it will reinforce invisibly so it couldn't hurt. I really have grown partial to tree percs :)

EDIT: Update - I just showed a mate the video of my Nano in action and he instantly went over to epicvape and ordered one :D
 
Last edited:

Tweak

T\/\/34|<
^ That is the website I was referring to. Home delivery is $15.73 for me, :o. Minimum order is 15 tubes.

Edit: 18 pack for only 18.95 + 8.45 for shipping.
 
Tweak,
  • Like
Reactions: Caligula

Attack of the vapors

Magic Flight Attendant
Quick question.
If you leave the e-nano plugged in, can you turn it off? Do you just dial it all the way down to turn it off or is there a switch? Or must you unplug it?
Thanks.
 
Attack of the vapors,
Top Bottom