Massdrop Sales

Caligula

Maximus
I doubt this is the right place but I wasn't sure where to ask- does anybody know where I could buy a curved 14mm adapter so I could use my pen upright with the roor recycler?

I know I've seen the post a while ago where someone here did a glass adapter to keep their pen upright while using it with a regular downstem. I've googled everything I could think of and can't find the search button here. Thanks in advance

Like this one that @DieHard has?

5YpvsUp.jpg
 

z9

Well-Known Member
I doubt this is the right place but I wasn't sure where to ask- does anybody know where I could buy a curved 14mm adapter so I could use my pen upright with the roor recycler?

I know I've seen the post a while ago where someone here did a glass adapter to keep their pen upright while using it with a regular downstem. I've googled everything I could think of and can't find the search button here. Thanks in advance
I was thinking an upside down claisen adapter would work well since the recycler is direct inject. Plus the claisen would give you some more functionality. I know I've seen u adapters in the past but I can't find any now.

Claisen.jpg


Or maybe a davinci u adapter and some tubing?

Looks fragile though
2013_08_20_16.54.42__55593.1381520698.1280.1280.jpg
 
Last edited:

DieHard

Accessory supplier
Accessory Maker
I started a poll on Massdrop for vac chamber set ups for BHO. If anyone has any better options feel free to add to the poll. Vote here. https://www.massdrop.com/vote/best-vacuum-chamber-kit?s=Vac chamber

I doubt this is the right place but I wasn't sure where to ask- does anybody know where I could buy a curved 14mm adapter so I could use my pen upright with the roor recycler?

I know I've seen the post a while ago where someone here did a glass adapter to keep their pen upright while using it with a regular downstem. I've googled everything I could think of and can't find the search button here. Thanks in advance
Oregonglassblower on !offer! Has many adaptors and will make it for you if you don't see it on their Ioffer.com site. http://www.ioffer.com/selling/oregonglassblower
They also give a FC discount. Just make an offer based on 10% off.
 

poonman

Well-Known Member
I started a poll on Massdrop for vac chamber set ups for BHO. If anyone has any better options feel free to add to the poll. Vote here. https://www.massdrop.com/vote/best-vacuum-chamber-kit?s=Vac chamber
I've just voted .
But I have a question for you .
If you click on the product page , it takes you to their site .
and the prices are lower if you order from them .
The 3rd largest vac was listed at $344 on MD , but only $ 210 on their site .

So which price are we expecting to better ?

tia
 

dannkk

Well-Known Member
I've just voted .
But I have a question for you .
If you click on the product page , it takes you to their site .
and the prices are lower if you order from them .
The 3rd largest vac was listed at $344 on MD , but only $ 210 on their site .

So which price are we expecting to better ?

tia

I just dealt with that company. Their website is a little messed up. Just find the chamber you'd want, and add 100 bucks to its price for the smallest pump. That's the price you'd pay, as long as you speak to them. The chamber is great, btw. I got the 3 quart pyrex.
 
dannkk,
  • Like
Reactions: poonman

DieHard

Accessory supplier
Accessory Maker
I've just voted .
But I have a question for you .
If you click on the product page , it takes you to their site .
and the prices are lower if you order from them .
The 3rd largest vac was listed at $344 on MD , but only $ 210 on their site .

So which price are we expecting to better ?

tia
Yeah, I saw that when I was linking the item sites to massdrop. That is strange. Their pricing has even changed in the last few days. I have been looking for a while. I think the better price we should expect will be lower than the lowest on their site. After there is enough votes, massdrop responds and contacts the vendor. I'm not really sure how that works.
 
DieHard,

Deadhead101

I am the Vapor King--I can do anything
I got my Roor recycler today. It blew me away, functions fantastically. I hooked it up to an e-nail, and tried a whole bunch of different bho's in it. I almost enjoy watching other people hit it as much as
i enjoy hitting it myself. It's a very solid piece and everyone who tried it agreed the MD deal was a slam-dunk-360 pointer (refernce below) .:science:

 

indebttoo

New Member
Re: MD. Is what they sell from the manufacturer, new in box? No seconds, gray market or knockoffs?
I ask because they have the Volcano Vaporizer for $408. (That's supposed to include the balloon/valve kit).
It's a terrific price for the Classic version w/ either valve kit....but I tend to be a cynic.
Hope to hear about them. TIA
 
indebttoo,

063_XOBX

Ganjapreneur
Re: MD. Is what they sell from the manufacturer, new in box? No seconds, gray market or knockoffs?
I ask because they have the Volcano Vaporizer for $408. (That's supposed to include the balloon/valve kit).
It's a terrific price for the Classic version w/ either valve kit....but I tend to be a cynic.
Hope to hear about them. TIA
They don't carry a standing stock of items so they have very low overhead, they literally only buy the amount they've already sold. Almost instant profit.
 
063_XOBX,
  • Like
Reactions: indebttoo

indebttoo

New Member
They don't carry a standing stock of items so they have very low overhead, they literally only buy the amount they've already sold. Almost instant profit.
Are the items 1st quality direct from the manufacturer?

Also you may or may not get the traditional packaging.
Do you get the manufacturers warranty, if you know?
I've emailed MD for answers, but haven't heard anything :-(
 
Last edited by a moderator:
indebttoo,

grokit

well-worn member
I do not think that warranty terms would change unless explicitly stated for that item.
 
grokit,

DieHard

Accessory supplier
Accessory Maker
If MD contacts Storz and Bickel directly to arrange for the drop in the first place, then they would more than likely be considered "authorized retailer". I'm not sure though. Maybe you could contact S&B to ask them about warranty on MD sales.

Edit:There is also a place on MD for discussion at the bottom of the page. They have answered my questions there also.
 
DieHard,

indebttoo

New Member
If MD contacts Storz and Bickel directly to arrange for the drop in the first place, then they would more than likely be considered "authorized retailer". I'm not sure though. Maybe you could contact S&B to ask them about warranty on MD sales.
Good idea. Will do, thanks!

If MD contacts Storz and Bickel directly to arrange for the drop in the first place, then they would more than likely be considered "authorized retailer". I'm not sure though. Maybe you could contact S&B to ask them about warranty on MD sales.

Edit:There is also a place on MD for discussion at the bottom of the page. They have answered my questions there also.

FYI...just heard from Ash in Customer Support. He said:
(1) Volcano IS from the manufacturer
(2) mfg warranty applies
(3) should receive it within 3 weeks

Starting to feel a little bit better now seeing two positives. Has anyone tried the Adjust-a-bowl thing? How long do you reckon it'll take in the post to UK? I'd preferably like to order one if I'm going to keep the PnP and if I am one of the unlucky ones who faces the mouth piece issues, then at least the solution will be here by the time the problem arises.

Is this problem only there when you use the mouthpiece or also with the WT?

Also, the battery on this thing is around 2000 mah from what I've heard? I saw a battery power pack on VapeFiend stating it could charge your battery four times but the capacity advertised was 1000 mah, I'm assuming they mean 10,000? I have a portable Anker Astro Slim 2 battery rated at 6500 mah, could I power or charge the PnP with the USB cable from that? or does it require a special voltage output? If I can then that solves the battery issues out, leaving only the mouth piece worry

Has anyone here tried the Ascent by the way? Opinions?
 
Last edited by a moderator:
indebttoo,
  • Like
Reactions: DieHard

DieHard

Accessory supplier
Accessory Maker
Massdrop has the Santa Cruz Shredder Omni Nail Ti nail for $109(lowest price).
MFLB maple Laser-etched is there for 6 more days for $79.99
MFLB power adapter and Finishing Grinder too.
Volcano has one day left for $408.99
Pinnacle Pro for one day left for $149.99
 

VAPEHUNTER

Well-Known Member
I just received my samba frit disc from MD. My first impression is :oWOW it's small. But I like that, I think it will work well with my Pinnacle Pro.....as soon as it comes back from getting repaired:ugh:.
 

VAPEHUNTER

Well-Known Member
I just received my Simba frit from Mass Drop. I've Never had one before how much water do I put in? In the videos it almost looks like they fill it just a little above the frit, but then it kinda looks like there is an "air gap" below the frit. I guess I will just have to experiment a little.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I just received my Simba frit from Mass Drop. I've Never had one before how much water do I put in? In the videos it almost looks like they fill it just a little above the frit, but then it kinda looks like there is an "air gap" below the frit. I guess I will just have to experiment a little.
Hard to say, I'd start with the water level flush with the top of the frit and go from there.
 
Top Bottom