lazylathe
Almost there...
No worries!!!
I used a bit of silicone tubing that fits over the barb and snugly inside the glass mouthpiece. Works really well!
Discontinued The Herbalizer
- Thread starter nopartofme
- Start date
No worries!!!
I used a bit of silicone tubing that fits over the barb and snugly inside the glass mouthpiece. Works really well!
havealight101
Norski
Does anyone know what Herbalizer's flat rate is through? USPS priority?
Edit:Most likely a better question for Sheila, sorry.
Edit:Most likely a better question for Sheila, sorry.
Last edited:
Vitolo
Vaporist
The real link is
www.youtube.com/watch?v=8OZ9h31upIQ
www.youtube.com/watch?v=8OZ9h31upIQ
toros23
Well-Known Member
My 10-14mm adapter came in today from mtn. glass, but it doesn't come close to fitting
@grokit - If you are still interested in pursuing this, check out the 10/14 adapter I linked a while back from oregonglassblower on ebay. It is quite a bit more expensive than the ones you found but mine fits the barbed end of the adapter really well.
My 10-14mm adapter came in today from mtn. glass, but it doesn't come close to fitting
So this is the best I can do for now, it works great with the swaggertube
Herbie's a bit dirty in this pic, apologies!
How are you connecting, into the airpath?
grokit
well-worn member
The narrow part of the gong buts right up to herbie's bowl connection, it doesn't fit inside or out. At first I was a bit disappointed in this, but then I realized that with the ssv tubing connecting the two that the tubing wasn't really in the vapor path, and that the connection is somewhat flexible which is good for me because where I have it set up I have to lean forward a bit to hit it with a ht. The flexibility of this adapter combined with the bend of the swagger mouthpiece accommodates this quite well.
Okay here's what I don't get: how is a 10mm adapter gonna fit on a 12mm wide outlet?
Last edited by a moderator:
letter never sent
reckoner
1_gr8_underdog
Trapped in the Astral Planes Back from the dead
My Herbie ships Tuesday!! 
Last edited:
havealight101
Norski
@grokit, I think he meant the 10 mm goes in side of it. Edit:nevermind
At 12.09 mm, some 19mm male joints may fit over it, the inside of my evo is 11.92.
One thing to keep in mind when using ground joints with non ground glass connections is that every joint is slightly different, so 2 of the same joints from the same blower may not fit the same.
At 12.09 mm, some 19mm male joints may fit over it, the inside of my evo is 11.92.
One thing to keep in mind when using ground joints with non ground glass connections is that every joint is slightly different, so 2 of the same joints from the same blower may not fit the same.
grokit
well-worn member
D'oh 
!
@havealight101, that's interesting but not quite it.
I'll post another pic soon...
here ya go:
10-14 adapter
with both 10-14 and 14-18 mm adapters
Now I don't know which way I will like better;
if I wasn't bone fucking dry I could compare the two setups!
!@havealight101, that's interesting but not quite it.
I'll post another pic soon...
here ya go:
10-14 adapter
with both 10-14 and 14-18 mm adapters
Now I don't know which way I will like better;
if I wasn't bone fucking dry I could compare the two setups!
Last edited:
toros23
Well-Known Member
Yep, @letter never sent is correct.. It should fit over the barbed end of the small adapter used to connect the whip.
havealight101
Norski
Does the 10 mm joint restrict the draw anymore than the herbie itself?D'oh
@havealight101, that's interesting but not quite it.
I'll post another pic soon...
here ya go:
10-14 adapter
with both 10-14 and 14-18 mm adapters
Now I don't know which way I will like better;
if I wasn't bone fucking dry I could compare the two setups!
toros23
Well-Known Member
No, the opening on the top of the bowl is less than 10mm and the smallest opening on the barbed end of the whip adapter is less than 5mm.
lazylathe
Almost there...
stickstones
Vapor concierge
I had a great session Saturday night with a couple of family members. I went straight for the gold by doing bags on 440 right from the beginning. three bowls almost full took care of us for the whole night. Vapor was thick, potent and knocking me and my smokers on their asses. I hadn't been that high in ages.
Herbie is going to force us all to think differently and learn a lot about vapor. My paradigm is officially shattered!
Herbie is going to force us all to think differently and learn a lot about vapor. My paradigm is officially shattered!
stickstones
Vapor concierge
So I got this thing hooked up to the HTs. My original Cloud HT is in an ISO soak and will be available later. But I used my PNP WT with it and all I can say is... 'whoooof.' Smoother, tastier, and maybe even stronger, as I am rocked. I had a 14mm gong to a glass tube end that I slipped into some silicone, which I in turn slipped on the outside of the bowl stem. So it's nothing but glass after the bowl. I don't know when I will ever pull out that whip again!
