Discontinued The Persei Vaporizer for herbs and concentrates.

Limosnero

Active Member
Might you be in Detroit for this : http://www.americanmedicalmarijuanaprofessionals.com/ (for the 4th annual Expo) If you are not and you have glossy advert's, I would gladly pass them out.

all the info and troubleshooting tips that you folks have shared is phenomenal! And many thanks for that

I'll be there...take the magic vapor bus & stop at the GLG booth for dab or KISS cart action on me.
 

Cheerful Dub

Spaced Station
What kind of wire was used in this repair. Is the resistance the same ~1.0 Ohm? Does this wire heat along the entire length (even going thru the white grommet)? Thus transferring heat into the top?
I'm assuming it was A1 Kanthal and I don't see why this wouldn't be "fine" in the long run. I am planning on scooping some XC-116 ceramic rope to cut lengths for short wick replacements, or alternately repurpose some 1/8" ceramic wicks I have laying around that I could cut down in thirds to fit in the cup. When you rebuild with Kanthal wherever you put a heavy kink in the wire is where it tends to stop transferring heat, so where the "legs" go down into the cup holes, if you bent them at 90' instead of keeping them straight up and down it would work fine. If you are really paranoid about this you can buy non-resistance wire and solder them together, but that's a huge pain in the ass and is generally reserved for highly specialized RBAs such as the GG Ithaka. Either way you'd know immediately when you do a dry fire to adjust the coils, as you always want them glowing from the "center out".
 

Vapvap

Well-Known Member
What kind of wire was used in this repair. Is the resistance the same ~1.0 Ohm? Does this wire heat along the entire length (even going thru the white grommet)? Thus transferring heat into the top?

It is kanthal wire, and like in the e-cig world, it's better to change it regularly.
My brother says he don't measure Ohm ! But the wire only glow around the wick, and when there is oily, it don't glow (normal function)
 

Sleepin in CA

Higher than a Pterodactyl, you can call me Caveman
Accessory Maker
@Vapvap thanks for the video, and thanks to your brother too! One quick question.....what gauge is the wire used? I am going to buy some with the intention of rebuilding, and would like to use the same gauge wire.

Thanks!
 
Sleepin in CA,

Limosnero

Active Member
will do for sure. I might have some Cannatonic shatter for the occasion.

KK we'll be having a nice array of everything with some GG#4 concentrate as well. Gonna bring some w9-tech products for people to try. Maybe I should bring some to resell hmmm
 
Limosnero,

DieHard

Accessory supplier
Accessory Maker
Many thanks to @THCscientific for handling my ticket issue. :clap:
Also, I received my Hammer top today after waiting for the USPS. (Was shipped on 2/19 2 Day).
The Bender is much easier to use with this beauty.
48DULnz.jpg
 

ED421

Well-Known Member
I've got a few questions about Nibblers. Does the Nibbler Bubbler work with the Persei + Hercules combo? The picture shows it with the Omi cart. I'm debating between the bubbler and the XL. Any thoughts or comparisons between the two? I mainly want to use it with the Hercules so I was leaning towards the XL but if the bubbler works for many situations/carts then that might be interesting. I like things that are multi-purpose. As always, thanks for the knowledge!
 
ED421,

Sleepin in CA

Higher than a Pterodactyl, you can call me Caveman
Accessory Maker
I've got a few questions about Nibblers. Does the Nibbler Bubbler work with the Persei + Hercules combo? The picture shows it with the Omi cart. I'm debating between the bubbler and the XL. Any thoughts or comparisons between the two? I mainly want to use it with the Hercules so I was leaning towards the XL but if the bubbler works for many situations/carts then that might be interesting. I like things that are multi-purpose. As always, thanks for the knowledge!

Nibbler = silver carts only
Nibbler XL = Hercules

I love my NXL, and wouldn't trade it for anything.
 

HerbalHighway

New Member
Received my replacement glass piece along with orings thrown in for free from @PlanetVape in record time!! Orings a MASSIVE improvement and now all working pretty well!! The problem still exists with the ceramic cup sitting too close to the top and clogging the pipe every few tokes meaning have to ISO bath and wait a while. However the inhale is extremely tasty and smooth!!! I'm sure a workaround will be made in near future or at least hope so as would love to be able to use it more regularly (I find that if don't screw the bottom tightly it will give you a little more space and less clogging but rattles a bit - a very good option workaround imo).

The wide ceramic cup without coil looks very interesting and excited to see how it works if is released!! Overall if problems resolved with clogging issues this would get 11/10 but for now will stick with a solid 7.5 due to effort needed.

Planetvape were excellent as last few times have ordered recently (going a bit vape mad lol) and highly recommended! Big thanks to @THCscientific, @Caligula and @Sleepin in CA for the help!! Really appreciated!!! Got my Hercules coming this week I hope...However these Ti KISS carts are working amazingly for me - the taste being so so clean - specially at 3.7V imo! The 7.4V gives you a proper dome rocking hit that'll send you to Planet Utopia and leave you there!! All that needs to be worked on at 7.4v is bringing the taste through a little more as find stuff can taste similar after a while but then that may just be me! Small detail though but when striving for perfection n all ;)

UPTech I take my hat off to you guys for producing fantastic products and great customer service!! You also chose great distributers in Vaporhouse and PlanetVape!! I've already sold you guys 3 more in a week lol. Hope the start of many more ;)
 

HerbalHighway

New Member
HerbalHighway, did you get enough o-rings to put above and/or below to give the Kiss more head space?
Yeh, they gave me 2 and have put above and below. I also purchased a thicker black oring 005 for the inner tube which I feel clogs a little less than the orange thinner one for some reason. The orings are a massive improvement but still too close to air vent I think...keeps getting clogged after 4-5 hits. Still love it tho!! :)
 
HerbalHighway,

HerbalHighway

New Member
Thinking I may try putting two on the above instead of above/below combo. Will report back if makes any difference...

Update - obviously it made no difference! 7.4V giving me silly suggestions : /
 
HerbalHighway,

StickyShisha2

Well-Known Member
Yeh, they gave me 2 and have put above and below. I also purchased a thicker black oring 005 for the inner tube which I feel clogs a little less than the orange thinner one for some reason. The orings are a massive improvement but still too close to air vent I think...keeps getting clogged after 4-5 hits. Still love it tho!! :)


i haven't taken mine out since putting it away after getting frustrated day 1 with it.

my Herc almost never leaves my hand, so i guess I should have gotten the NXL.
 

HerbalHighway

New Member
i haven't taken mine out since putting it away after getting frustrated day 1 with it.

my Herc almost never leaves my hand, so i guess I should have gotten the NXL.
Had similar thoughts re NXL but if something like the ceramic cup with no coil comes out that could change everything ;) Gonna have to save up for it and next on my list for sure! Afraid to use the Herc when arrives if that good...what will happen to all my other attachments : /
 
HerbalHighway,

PPN

Volute of Vapor
Hi guys, I don't own the Persei, but I'm eager of kief, so my question is:

Is it possible to vape kief everydays in the Hercules (sr71 or 74)?

I read the hercule can vape enerything, is it true?
 

nickzzzx

Well-Known Member
I know for a fact you can get a ceramic cup with a kanthal wire imbedded in it. The wire could be spiral shaped like the cup so it heats up evenly. This design could be awesome
 
nickzzzx,

Sleepin in CA

Higher than a Pterodactyl, you can call me Caveman
Accessory Maker
Anyone know if 24ga/.5mm wire will fit through the holes on a kiss cart? Have a line on some, but can't afford to throw money around right now if it will not work. Any help would be much appreciated!

=)
 

nao12000

W9 Tech Rep
Company Rep
Hi guys, I don't own the Persei, but I'm eager of kief, so my question is:

Is it possible to vape kief everydays in the Hercules (sr71 or 74)?

I read the hercule can vape enerything, is it true?
Yes it does vape anything you throw at it !
 
nao12000,
Top Bottom