ataxian

PALE BLUE DOT
That's what the cloud buddy is for ! You simply pull the stopper off to clear it leaving the enano and gong on the piece.
$28 is nothing?

Are you joking?
Hot tip on the $28 Bubbler that works well?

I'm out of here!
 
ataxian,

2 Paces

Well-Known Member
That's what the cloud buddy is for ! You simply pull the stopper off to clear it leaving the enano and gong on the piece.

I understand the concept completely.;)

As I said, I just know myself well enough at this point to know what I use often & what I wouldn't use. I wouldn't use a Nano on a bubbler with a cloud buddy over what I already have, so they aren't worth picking up to me. Personal preference.
 
Last edited:

LazyIdol

Well-Known Member
You guys are sure putting the pressure on with all these videos and wonderful pictures. I dont know how long ill be able to hold out with that new purpleheart model too. My question for you guys, do you still need to pull the e-nano between hits when using with a cloudbuddy to keep it from roasting the bowl?
 
LazyIdol,

Tweak

T\/\/34|<
My question for you guys, do you still need to pull the e-nano between hits when using with a cloudbuddy to keep it from roasting the bowl?

In my very limited experience, it depends on how close the heating element is. If it is mere millimeter away, the resulting radial heat will roast.
 
Tweak,
  • Like
Reactions: ataxian

flotntoke

thoroughly vaped
Can't speak for with the cloudbuddy itself, but I can leave mine on with just the stem. Have two glass pieces I often do this with. Doesn't roast immediately, but does build up heat. I usually leave it on between hits - minute or two at most at a time. I leave it on a bit longer sometimes just to build up the extra heat to squeeze that last bit out of a tube. Gives a little more heat without having to touch the dial. I wouldn't leave it on for more than 3 or 4 minutes, though. Assume it would be the same with a cloudbuddy/cloudpal because the element is going to be the same distance on one of those (or anything else).

Even tho I don't use a cloudbuddy/cloudpal I do use a 18mm m>f adapter, so that's in the equation. Allows easy clearing without finger burning and to me is cheaper/easier than using cloudbuddy/cloudpal. Lift the whole thing by the adapter (nano, nano gong & adapter connected) to clear, set it back down, repeat for a few hits. When vapor gets really thin, give the whole thing a good shake (or just stir the load), let it sit for a few minutes and get that last hit out. Not as tasty, but seems to be as efficient.

YMMV... Mine acts different with this with different strains/dryness/grind/etc., and not all nano gongs are exactly the same. Some a little longer than others. From pics I've seen, I'd say my two are about average. One just a tad longer than the other, but no real difference from one to the other while leaving it on.

Not sure about your other glass, but Lev's heavy glass won't budge with nano on the GonG. You know what's best for you - but I'd strongly suggest you pick a nano up. It is an AWESOME vape!!

@Tweak... Excellent vid!!!! Trying to hold off on picking that bubbler up, but that sure bumped my GAS into high gear.
 

Maine420

GROOVY GRANNY
Question to E Nano fans-
Is this VAPE a one person VAPE? How big is the bowl compared to the Solo stem bowls? I find the Solo isn't the greatest to use with more yhan 1 person. I plan to use the E Nano dry.
Thank you for your advice!
Should I indulge?? I really enjoy my Solo! Swayy me towards the Nano!
 
Last edited:
Maine420,

as

Well-Known Member
the nano is a more a one person vape then a party vape but you can use the nano with a few mates just need to reload often

the bowl is about half the size of a solo thats just me guessing tho i dont have both in front of me atm

the nano is more powerful and less restriction then the solo it will out perform the solo in all aspects but still remain very alike

the nano will hit you harder and faster then the solo
 

ataxian

PALE BLUE DOT
Can't speak for with the cloudbuddy itself, but I can leave mine on with just the stem. Have two glass pieces I often do this with. Doesn't roast immediately, but does build up heat. I usually leave it on between hits - minute or two at most at a time. I leave it on a bit longer sometimes just to build up the extra heat to squeeze that last bit out of a tube. Gives a little more heat without having to touch the dial. I wouldn't leave it on for more than 3 or 4 minutes, though. Assume it would be the same with a cloudbuddy/cloudpal because the element is going to be the same distance on one of those (or anything else).

Even tho I don't use a cloudbuddy/cloudpal I do use a 18mm m>f adapter, so that's in the equation. Allows easy clearing without finger burning and to me is cheaper/easier than using cloudbuddy/cloudpal. Lift the whole thing by the adapter (nano, nano gong & adapter connected) to clear, set it back down, repeat for a few hits. When vapor gets really thin, give the whole thing a good shake (or just stir the load), let it sit for a few minutes and get that last hit out. Not as tasty, but seems to be as efficient.

YMMV... Mine acts different with this with different strains/dryness/grind/etc., and not all nano gongs are exactly the same. Some a little longer than others. From pics I've seen, I'd say my two are about average. One just a tad longer than the other, but no real difference from one to the other while leaving it on.

Not sure about your other glass, but Lev's heavy glass won't budge with nano on the GonG. You know what's best for you - but I'd strongly suggest you pick a nano up. It is an AWESOME vape!!

@Tweak... Excellent vid!!!! Trying to hold off on picking that bubbler up, but that sure bumped my GAS into high gear.
yVKin1U.jpg

Breaking glass!
M0hUCqL.jpg

Have no fear the D020 to the rescue!
 
Last edited:

flotntoke

thoroughly vaped
Bummer, ataxian! Looks like one of those cheap Chinese ashcatchers tho, so hopefully not too bad of a loss.

Question to E Nano fans-
Is this VAPE a one person VAPE? How big is the bowl compared to the Solo stem bowls? I find the Solo isn't the greatest to use with more yhan 1 person. I plan to use the E Nano dry.
Thank you for your advice!
Should I indulge?? I really enjoy my Solo! Swayy me towards the Nano!

I'd call the nano a 2 person vape - 3 at most comfortably. You could definitely use it with more, but everyone will probably need to be a little patient. I've used mine with up to 5. The way I got it to work was to grind some up and leave it in small dish. Load it pretty light (2 hits or so). Let someone do them. Blow out the duff, and suck another small load into the tube. Dry definitely the way to go here, too. Think the bubbler would have just made it worse.

Should you get one? HELL YEAH!! I can't see the solo being much easier to work with with more than 2 - 3 people, either. Really, if you want to keep that party going (especially with usual combusters), you're going to have to start filling bags. My EQ would do OK, the Volcano even better of course. I don't know of any other way to have more than a few partying from the same vaporizer. Even a da buddah, Silver Surfer or my old box vape isn't too easy in spite of the fact you can put a bunch of material in it. You still have to stir a good bit (more loaded up = more stirring), and you'll lose some tasty hits with a big load.

But, benefits in that situation are that the nano is quick to warm, keeps up temp, and virtually foolproof. Just get it hot, load the tube, take a hit. So IMO about as good as it gets without a bag for a small crowd.
 

al bundy

Vaporist
Question to E Nano fans-
Is this VAPE a one person VAPE? How big is the bowl compared to the Solo stem bowls? I find the Solo isn't the greatest to use with more yhan 1 person. I plan to use the E Nano dry.
Thank you for your advice!
Should I indulge?? I really enjoy my Solo! Swayy me towards the Nano!

Just get extra stems and everyone gets their own :).
 

ataxian

PALE BLUE DOT
Bummer, ataxian! Looks like one of those cheap Chinese ashcatchers tho, so hopefully not too bad of a loss.



I'd call the nano a 2 person vape - 3 at most comfortably. You could definitely use it with more, but everyone will probably need to be a little patient. I've used mine with up to 5. The way I got it to work was to grind some up and leave it in small dish. Load it pretty light (2 hits or so). Let someone do them. Blow out the duff, and suck another small load into the tube. Dry definitely the way to go here, too. Think the bubbler would have just made it worse.

Should you get one? HELL YEAH!! I can't see the solo being much easier to work with with more than 2 - 3 people, either. Really, if you want to keep that party going (especially with usual combusters), you're going to have to start filling bags. My EQ would do OK, the Volcano even better of course. I don't know of any other way to have more than a few partying from the same vaporizer. Even a da buddah, Silver Surfer or my old box vape isn't too easy in spite of the fact you can put a bunch of material in it. You still have to stir a good bit (more loaded up = more stirring), and you'll lose some tasty hits with a big load.

But, benefits in that situation are that the nano is quick to warm, keeps up temp, and virtually foolproof. Just get it hot, load the tube, take a hit. So IMO about as good as it gets without a bag for a small crowd.
It was a Local Smoke Shop overpriced ASH CATCHER.
Less is more in my case.

You got to see the new stand I made for pairing the NANO with a HYDRYO type glass tube.

The NANO with my new set up is all time epic action!
 

Mrmrmrmr

Well-Known Member
Finally got my organic cotton already have the gong loaded... Almost time to blastoff

The amount I got from this tiny piece is astounding.. After using the enano for so long I could honestly say without a doubt I could get rid of all my other vaporizers and still be extremely satisfied with the 'nano! Is there magic is this thing:dog:
 
Last edited:

Caligula

Maximus
Finally got my organic cotton already have the gong loaded... Almost time to blastoff

The amount I got from this tiny piece is astounding.. After using the enano for so long I could honestly say without a doubt I could get rid of all my other vaporizers and still be extremely satisfied with the 'nano! Is there magic is this thing:dog:

Glad that worked in your favor.
 
Caligula,
  • Like
Reactions: Mrmrmrmr

Mrmrmrmr

Well-Known Member
Man I keep thinking im combusting.im including a picture of the cotton+ wax I have vaped so far never going above 7,
Sorry bout the quality
oidto4.jpg
 
Last edited:
Mrmrmrmr,
  • Like
Reactions: ataxian

biohacker

Well-Known Member
Grrrrr.....broke my one and only mouthpiece stem! Is Andy the only source of these? Need to get one shipped stat!
 
biohacker,

Reflections

Well-Known Member
Hi everyone...Ive been skimming thru some of the pages here...looking for my first plug-in..I have 3 portables,but they just dont take me where I want to go.I like that the E-Nano heats up quick, and looks easy to use. The hi is a year waiting list and the ud takes a little longer to heat up, is there any other differences?

What accessorys would I need to go along with it? Best type stem,,did Ed tnt ever make a wood one for these? I would also like an aromatherapy bowl...do i need to order that from the ud site? and if I used it would it change the taste of the unit?

All i have is a small 14mm bubbler and the pnwt..would i need to buy something to attach those? That D020 looks nice lol.. I have never used a plug in so be gentle :D
 
Top Bottom