E-Nano from Epickai

ataxian · Feb 19, 2014

Enchantre said:
I think I might hot-glue a dot at my preferred spots... usually, it's kinda dark where I have it, so I have a hard time seeing the numbers.
I ordered a couple more pinch-stems, as I love the basket screens, especially for concentrates.
I think I'll eventually get a pinch-Gong, too.

Are you into GLASS?
I use the D020 bubbler I picked up for $28 delivered.
It pairs well with the NANO.
I'm getting a more customized piece from GBD. I broke so much glass it was time for a new piece.
The NANO with a glass piece is amazing. I leave it plugged in on level 4. When I'm feeling that my THC, CBD's are low I crank it up to 6.5 pull out a water tool.

The NANO is CANNABIS GOURMET!

VaPeD&CoNfUsEd · Feb 19, 2014

@ACE OF VAPE do you offer any kind of an upgrade program?? Like could I send you my current enano and have the walnut removed and replaced with an exotic wood for a fee? I'd love to do this and have a tune up at the same time.

Mrmrmrmr · Feb 19, 2014

Just what I was going to ask ^^^
This would be so great.. Well the wait would suck being enanoless and all. Love to get in on that let us know man !

Tweak · Feb 19, 2014

ataxian said:
I use the D020 bubbler I picked up for $28 delivered.
It pairs well with the NANO.

They are a perfect match, :tup:

ataxian · Feb 19, 2014

All day long!

Cinnamonster · Feb 19, 2014

I received my Nano... It's pretty cool. :tup:

VaPeD&CoNfUsEd · Feb 19, 2014

Tweak said:
They are a perfect match,

I'm going to have to scoop one of these up. Everyone seems to like them so well.

smokum · Feb 19, 2014

More VIDS Please :razz:

<--- says the guy who has never posted a vid ever :rolleyes:

I don't know why I'm even looking at another vape :shrug:

VAS is baaaaad MmKay :evil:

ataxian · Feb 19, 2014

smokum said:
More VIDS Please <--- says the guy who has never posted a vid ever

I don't know why I'm even looking at another vape VAS is baaaaad MmKay

CANNABIS is the "HOLY GRAIL"!

I can buy a more expensive vaporizer however that is not the point. The NANO is small in size & taste amazing for under $200.

It just so happens that it pairs well with glass!

Tweak · Feb 19, 2014

VaPeD&CoNfUsEd said:
I'm going to have to scoop one of these up. Everyone seems to like them so well.

For $28 it's a steal. It has the same bore as the nano so it can be held with one hand. Only takes an ounce of water + 1 drop of Rezblock. And the perc fires from any angle you may be holding it. So far no blowback into the nano bowl either.

Caligula · Feb 20, 2014

Tweak said:
For $28 it's a steal. It has the same bore as the nano so it can be held with one hand. Only takes an ounce of water + 1 drop of Rezblock. And the perc fires from any angle you may be holding it. So far no blowback into the nano bowl either.

Even my gigantor bubbler doesnt get blowback with the Nano.

Also FWIW theres a US website that bought a bunch of D020s and are selling them for ~$36 or so. Not too bad if you dont want to wait a month?

And no I dont have the website address. Sorry.

ataxian · Feb 20, 2014

Caligula said:
Also FWIW there's a US website that bought a bunch of D020s and are selling them for ~$36 or so. Not too bad if you don't want to wait a month?

Mine arrived to my front door in less than 3 weeks for $28.
If you can handle the wait?
Or like @Caligula pointed out if you spend a extra $8 you have it quicker!
My NANO was 5 days from order!

ghgate is where you buy the D020 for cheap!
I use it every session during the day with the NANO.

@Tweak Very nice picture!
@VaPeD&CoNfUsEd for ($28 - $36) it's very impressive!

Tweak · Feb 20, 2014

Caligula said:
Also FWIW theres a US website that bought a bunch of D020s and are selling them for ~$36 or so. Not too bad if you dont want to wait a month?

8" Twisting Slitted Showerhead

It is $37.50 + Shipping ($7) and doesn't come with the nail, dome, and slides. Ends up being $44.50, or 64% more than from DHgate.

They appear to be doing the same with the WP-010, except the markup is %100 more.

ataxian · Feb 20, 2014

Tweak said:
8" Twisting Slitted Showerhead

http://thick-quality-glass.myshopif...-artistic-mouth-piece-slide-not-included-18mm

I would buy this in a NEW YORK minute if I did not buy stuff all ready this week.
Maybe next week?

The size of the mouth piece is perfect!

2 Paces · Feb 20, 2014

Tweak said:
So far no blowback into the nano bowl either.

@Tweak - Are you saying that you can lift the Nano & leave the GonG on the bubbler and the material won't get blown out by the air/water pressure?

I'm hoping that's what you mean. I never use the Nano through glass because my one piece blows the herb all over the place unless you also take the GonG out of the joint each time before you end your hit.

I was hoping to just lift the Nano off to clear the chamber (leaving the GonG still on the bubbler) without losing herb on the floor, but maybe I'm asking too much.

Not sure if everyone always lifts their GonG off at the end of each hit?

Tweak · Feb 20, 2014

2 Paces said:
@Tweak - Are you saying that you can lift the Nano & leave the GonG on the bubbler and the material won't get blown out by the air/water pressure?

Yeah, so far. It might be because the volume of water in the D020 is so small. Idk.

Have you seen the Claisen adapter (cloud pal)? A cheap alternative to the Cloud Buddy.

This would fix your problem with your current piece, just lift a stopper instead of the Nano + GonG slide. Only around $9 shipped.

ataxian · Feb 20, 2014

2 Paces said:
@Tweak - Are you saying that you can lift the Nano & leave the GonG on the bubbler and the material won't get blown out by the air/water pressure?

I'm hoping that's what you mean. I never use the Nano through glass because my one piece blows the herb all over the place unless you also take the GonG out of the joint each time before you end your hit.

I was hoping to just lift the Nano off to clear the chamber (leaving the GonG still on the bubbler) without losing herb on the floor, but maybe I'm asking too much.

Not sure if everyone always lifts their GonG off at the end of each hit?

I make a carburetor!

I don't lift my vaporizer

Tweak · Feb 20, 2014

2 Paces said:
@Tweak - Are you saying that you can lift the Nano & leave the GonG on the bubbler and the material won't get blown out by the air/water pressure?

Well it happened today, still getting it with the D020, sorry.

Looks like the only choice is to lift or carb.

2 Paces · Feb 20, 2014

No biggie, thanks for the info. Saved me $28 :lol:

I love the Nano dry, and one of the things I love most is its simplicity. I know myself well enough to know I wouldn't use a multiple piece set up (carb or cloud buddy type) just to go through water with it. I already don't use the GonG because I don't like having to pull it and the Nano off the bubbler.

I guess I'm lazy when it comes to water, but I've got my EVO for simple water hits anyway :tup:

.

z9 · Feb 20, 2014

I pull my gong every hit because clearing a piece is really satisfying to me. I also get blowback with my most used piece so pulling the gong is necessary. I just grab it, usually I can get it out with no fuss while its hot.

I've considered getting OGB to make me a low profile male to female adapter with a hole in the side to act as a carb. This should eliminate any blowback, make the nano easier to use, and allow me to roast a bowl if I want. Although a simple male to female adapter with no carb would make it much easier to pull off a hot gong as well.

Mrmrmrmr · Feb 20, 2014

Think I may have combusted.. Milked it like crazy in the ion and the vapor started to look different more solid like smoke. I had maybe .09 of some wax on .08 of avb. Took it out and it wasn't ashy a dark brown a few yellow pieces at most. Doesn't really look like the material is combusted.hm

Caligula · Feb 20, 2014

No thats normal (well maybe not normal but its been known to happen?). The concentrate changes how the ABV looks as well as allowing massive vapor production.

Ive had that reaction myself a few times.

Edit: I always use fresh bud but id assume ABV would be the same.

Mrmrmrmr · Feb 20, 2014

All the glass didn't smell remotely like smoke, although I hardly remember that smell

,
For reference the dial was set the tiniest bit past 7 and 7 is usually as high as I go ( on the dial anyway :whoa:

)

ataxian · Feb 20, 2014

Mrmrmrmr said:
All the glass didn't smell remotely like smoke, although I hardly remember that smell ,
For reference the dial was set the tiniest bit past 7 and 7 is usually as high as I go ( on the dial anyway )

With my new glass I guessed wrong and set the dial at 8 however 6.5 was my number.
I think the glass paired correctly has a big influence.

The D020 work really well for how cheap it is.
The GBD is amazing as well.
NANO and glass = well matched!
WHOLE FLOWERS no grind!

Mrmrmrmr · Feb 20, 2014

2 Paces said:
No biggie, thanks for the info. Saved me $28

I love the Nano dry, and one of the things I love most is its simplicity. I know myself well enough to know I wouldn't use a multiple piece set up (carb or cloud buddy type) just to go through water with it. I already don't use the GonG because I don't like having to pull it and the Nano off the bubbler.

I guess I'm lazy when it comes to water, but I've got my EVO for simple water hits anyway .

That's what the cloud buddy is for ! You simply pull the stopper off to clear it leaving the enano and gong on the piece.

E-Nano from Epickai

PALE BLUE DOT

JoDa Glassworks

Well-Known Member

T\/\/34|<

PALE BLUE DOT

Well-Known Member

JoDa Glassworks

I am who I am and your approval isn't needed!

PALE BLUE DOT

T\/\/34|<

Maximus

PALE BLUE DOT

T\/\/34|<

PALE BLUE DOT

Well-Known Member

T\/\/34|<

PALE BLUE DOT

T\/\/34|<

Well-Known Member

Well-Known Member

Well-Known Member

Maximus

Well-Known Member

PALE BLUE DOT

Well-Known Member