masaki
Well-Known Member
Let's do this after my sr74 parts ship
Discontinued The Persei Vaporizer for herbs and concentrates.
- Thread starter THC SCIENTIFIC
- Start date
Caligula
Maximus
Let's do this after my sr74 parts ship
Speaking of which @THC SCIENTIFIC any updates on this? I really want to try that new rod and ti coils.
Me too. My attorney is gonna call on Tuesday to see what's going on
MileHighLife
Blower of glass, grower of grass
Late night milk shot ...
May I ask how you are loading the Full Melt, quantity, can it mix with wax, and should this also work comparably with the Sr71?
ataxian
PALE BLUE DOT
SR71 no problem! The SR71 is a heavy hitter.
The SR74 work better for me being a medical patient!
(less tinkering)
I loaded .33% of a Gram Then the Coil.
I will add .20% SHATTER on top of the coil latter today.
At first I over loaded and blocked the air passage.
Smaller progressive loads work best.
I like CRUMBLED and SHATTER better than HASHES however they work too!
FLOWER & WAX mixed should work however PURE CONCENTRATE are my preference!
Last edited:
Vapoholic420
-Loyal To The Oil-
Here's a video of the Hercules SR71 with the 3.7 volt black heating rod milking up the SSFG Hydraline Hydratube. I'm sure I could have probably milked it a little thicker with the 7.4 volt white heating rod, but a lot of people are having trouble with their 3.7 volt heaters and that's the only one that I use bcuz I get awesome hits and I love the flavor!! You just gotta hold the button down for like 5-6 seconds B4 you start hitting it. Be patient and you will be rewarded with better flavor, no burnt oil and longer lasting batteries!! Also, this is my first YouTube video and upload so I apologize if it's not the best! Cheers!!
ataxian
PALE BLUE DOT
You have it set to private?
StoneyBeach
New Member
Long-time lurker, first post.
My Okeanos seems to have the exact same problem. The bottom orange o-ring is much looser than the top one. I tried flipping the glass upside down to see if the glass/plastic was not uniform but that didn't make a difference. Still loose on the bottom.
Mine seems to leak from both the center post (despite tightening it down by hand - still seems to need that o-ring) as well as through the outside bottom due to the loose fitting bottom o-ring.
I'll be contacting the customer service line once they are in today.
StickyShisha2
Well-Known Member
i think that the LHS sold me the wrong rod. I wanted the rod for the HR74 but the one they gave me has a black band.
I'll put an ohm meter to it later and then decide if i'm keeping it, but if its as useless as the defective black rod i bought direct, i don't think i want it.
and the Okeanos just isn't working out for me. Once the center tube gets clogged it is a time consuming pain in the ass to correct. If the Kiss wasn't mounted so high that it touches the inside top, i might feel otherwise.
BTW, no leaks here.
I'll put an ohm meter to it later and then decide if i'm keeping it, but if its as useless as the defective black rod i bought direct, i don't think i want it.
and the Okeanos just isn't working out for me. Once the center tube gets clogged it is a time consuming pain in the ass to correct. If the Kiss wasn't mounted so high that it touches the inside top, i might feel otherwise.
BTW, no leaks here.
Last edited by a moderator:
StickyShisha2
Well-Known Member
i think my LHS opened a 74 kit to sell me the Ti coils, so they should have sold me that rod
Caligula
Maximus
Lol is your Persei suspended in the air? Is that fragile? Nice boards BTW.
Vapoholic420
-Loyal To The Oil-
Sorry, trying to fix that now. Gimme a min.
Edit: All fixed! Sorry it's not the best quality video, but you can still see it good. Like I said, it's my first video like this. Cheers!
Last edited:
Okeanos water leak fix.......
Lightly line center postbthreading with Vaseline. Screw down tight. Lightly line o ring on bottom with Vaseline....place water chamber together and screw down tight.
I did this preemptively after my experiences with my seals on the Nibbler XL. I think this is why mine doesn't leak.
Lightly line center postbthreading with Vaseline. Screw down tight. Lightly line o ring on bottom with Vaseline....place water chamber together and screw down tight.
I did this preemptively after my experiences with my seals on the Nibbler XL. I think this is why mine doesn't leak.
Caligula
Maximus
Did you know you have a giant baby in your room?
MileHighLife
Blower of glass, grower of grass
Yeah it hangs there. It is fragile but 2 18650s isn't enough to break it ... or at least hasn't been. I like being able to grab the rig with one hand when moving out to the shop or around the house I just make sure to put it up before murphs come over.
Caligula
Maximus
Maybe just put a wooden or rubber foot under the Persei to support it? Also thats a DV adapter, right?
MileHighLife
Blower of glass, grower of grass
Yeah it is
Vapoholic420
-Loyal To The Oil-
Yup! Lol. That's my son when he was 3 months old! Thank you for noticing. Lol.
Goodlife101
Living The Good Life
I have what I think is a dumb question but maybe someone out here can help me. I was recently looking in to electronic cigs atomizers with no silica and higher quality parts. would there be any ways I could use the KISS cart to vape ejuice? Would it run way too hot since its designed for oil? or cuold I run the 7.4 v cart on 3.7 to make it work? any and all help appreciated I would love to have a higher quality ecig and the kiss looks awesome as far as the build and materials used
Vapoholic420
-Loyal To The Oil-
@Goodlife101,
I wouldn't recommend the kiss carts for e-juice, but the Hercules SR71 with a full sized coil or the SR74 with 2 or 3 of the smaller Ti grade 2 coils in it, will definitely vape e-juice. I would try the 3.7 volt b4 the 7.4 volt tho. But that's just me. You should post your results too bcuz I'm sure alot of people, myself included, will be interested. I hope this helps ya.
What's going on withe Okeanos?
ataxian
PALE BLUE DOT
7.4 Volt is for SHATTER.
3.7 Volt for OILS.
The right voltage for the material processed!
Choose voltage based on your material!
Last edited: