freggie236
Well-Known Member
Shipping to me in Washington was $6 however.
Thx for the tip!
Thx for the tip!
Justpassedu
Well-Known Member
funny thing is i was asking about elbs and last night i went to take off my elb to put on some silicone tubing and attach my vapor glass bubbler and it broke , cracked straight at the bend and i was super careful , i know you kind of have to slowly wigglle it out , good thing my other elb came out easy and the q comes with 2. Man this is some cheap glass , is the el-bowl stronger than the q's glass bc they look about the same , i can grab a new elb on ebay for $8 shipped or the el-bowl for $14 shipped , not sure what to go with . On a side note the pipes daddy vapor glass bubbler works great .
Tweak
T\/\/34|<
I'd say pretty close to the same. Have you thought about one of OGB or 7th floors elbows?
I know this would be pretty tough ^^^^^
And these offer better airflow than EQs IMO.
Did you order it recently? Just wondering if they are sending the one like in the image or the second generation one's.
Justpassedu
Well-Known Member
Id like to order a elb from somebody that accepts paypal as i have a few $ sitting there, if you know anyone , as for the bubbler i actually bought it from a forum member in the fs section so im not sure how they come but it looks exact to the picture on there site except for having a defused downstem.I'd say pretty close to the same. Have you thought about one of OGB or 7th floors elbows?
I know this would be pretty tough ^^^^^
And these offer better airflow than EQs IMO.
fdotcombustion
Well-Known Member
Hi guys SSV user here wanting to try the EQ screen/bowl mod where is the cheapest place to get these screens? Not sure if there are different ones but I want the curved bowl style one
Justpassedu
Well-Known Member
I found the glass elb by oregonglassblower but its like $24 shipped , are they much thicker glass than stock ?
http://www.ebay.com/itm/New-Arizer-...aultDomain_0&hash=item3a83916c3a#ht_529wt_828
Mods please correct my double post and combine , i wasnt sure how - thanks
Modnote: posts merged.
http://www.ebay.com/itm/New-Arizer-...aultDomain_0&hash=item3a83916c3a#ht_529wt_828
Mods please correct my double post and combine , i wasnt sure how - thanks
Modnote: posts merged.
Last edited by a moderator:
Cannabis Connoisseur
I LOVE LIFE
Seek
Apprentice Daydreamer
A setup made of: 2x elbow, 1 screenless cyclone bowl, 1 VapeXhale ELB, 1 keck clip, 1 Potpourri bowl, some silicone tubing joining the 2 elbows tightly together.
Good cooling for such a short airpath. A long silicone whip could be better (if you don't mind a lot of silicone tainting your taste), but I don't have any more silicone than that.
I've got one dozen of glow-in-the-dark wristbands for the upcoming EVO. They also look nice on the EQ:
Good cooling for such a short airpath. A long silicone whip could be better (if you don't mind a lot of silicone tainting your taste), but I don't have any more silicone than that.
I've got one dozen of glow-in-the-dark wristbands for the upcoming EVO. They also look nice on the EQ:
Just picked up a DDave bowl, was wonderin if 1" screens are a perfect fit or if 1.25" could be secured? I want a tight fit. For you stoners thats about the size of a quarter vs about the size of a 50cent piece?
Also has anyone in the US came across an ELB screen with this profile?
The less screen/herb touching the wall on elbow packs, the better the extraction will be. With a tophat elbow screen, the hole outer perimeter of material is relying on thermal conduction.
Also has anyone in the US came across an ELB screen with this profile?
The less screen/herb touching the wall on elbow packs, the better the extraction will be. With a tophat elbow screen, the hole outer perimeter of material is relying on thermal conduction.
Justpassedu
Well-Known Member
Just picked up a DDave bowl, was wonderin if 1" screens are a perfect fit or if 1.25" could be secured? I want a tight fit. For you stoners thats about the size of a quarter vs about the size of a 50cent piece?
Also has anyone in the US came across an ELB screen with this profile?
The less screen/herb touching the wall on elbow packs, the better the extraction will be. With a tophat elbow screen, the hole outer perimeter of material is relying on thermal conduction.
If anyone knows of any affordable stronger after market elbs please let me know ? , now to answer your question all glass is usually made different so for the ddave bowl it really depends , i just bought 1 on ebay and a 1'' screen was just a drop to small so i ordered like 500 1.25'' screens that will def fit and just need a bit of cutting. Id grab bigger just to be safe go with 1.25'' and you can always cut down to size. The elbow screen question i cant answer but best of luck .
I am sorry to hear that! I do hate that it's so tough to get the right adapter.
If you pair the adapter you have with an SSV Wand (using the double screen method), the screen in the adapter becomes a moot point.
Hope that helps!
Edit: and in my Signature is the latest link "verified as correct by an FC member" DDave adapter, still available.
Last edited:
PuffTheMagicCaucasian
New Member
Quick question, how much material can this hold at a time? I own a MFLB & it holds roughly .2 grams & I hate having to refill the trench two or the times to get fully medicated. Secondly, how many bags does it take to use up a full load of material?
Thanks,I cant find 1.25s very cheap,I just need 5 or 10 if you want to recoupe some of your investment? 5 screens in an envelope for 5 bucks?
As for aftermarket elbs,if you mean the glass, most of the ones I've seen have a really short whip attacthment w no barbs. I've had filling bags fall off the stock elbow so I'm definitely not going to use a silver surfer elbow and expect any better.
Justpassedu
Well-Known Member
Sure i will pm me you here and i'll give you my paypal adress we can work something out , as for the elb i actually have 1 im using with the short whip attachment with no barbs and it's working fine with silicone tubing , i cant see it working aswell with stock tubing but so far no leakage so i may try the 1 by oregonglassblowers even though its about $23 shipped it is supposedly allot stronger.
Daddy Bear
Well-Known Member
Hey guys, just signed up to the forum but have read tones of content from this thread because I have an extreme Q on the way
DDave & Co thanks for everything you have contributed to this thread.
I clicked the ebay link in your signature but that adapter is sold out.
This one has been relisted by the same seller
http://www.ebay.com/itm/18MM-FEMALE...adapter-down-stem-High-Quality-/331119340716?
Do you think this one will do?
Im gonna email the seller just to make sure.
I know the size is right but should i ask him if theres a ledge for a screen in the middle of this adapter?
Or should I ask him something else?
I just want to make sure I get it right as postage to Ireland is quite expensive.
Also can you link to a pack of screens that would do the job also if youdont mind buddy?
Sorry for the nooB questions but I didnt even know what a vaporizer was 2 weeks ago lol
Thanks much
D.B
YetAnotherUsername
Youngster vaporist
All is relative, depending on how tight you pack, what temp you like and how moist is the weed. You have two ways to pack. Elbow screen or cyclone bowl. The elbow will hold about 0.1g (about one nice baloon), the cyclone holds about 0.3g (2-3 baloons). I switched from mflb and the Q is really hassle free, especialy with a water tool.
Daddy Bear welcome!
Happy to contribute! FC is an awesome resource and glad to see you've dug right in!!!
"From the pictures" that looks like the correct adapter. (Unfortunately, many vendors have borrowed photos and used in their listings, but sometimes doesn't match their product). Guessing you'd be safe with same vendor.
These Stainless Steel screens should fit the proper adapter.
http://www.ebay.com/itm/1-inch-Pipe...572?pt=LH_DefaultDomain_0&hash=item2ece74c084
Thanks for the link! Replaced the one in my Signature with it!
Hope this helps!
DDave
Vape On!
Justpassedu
Well-Known Member
I'd say pretty close to the same. Have you thought about one of OGB or 7th floors elbows?
I know this would be pretty tough ^^^^^
And these offer better airflow than EQs IMO.
I grabbed the 1 made by Oregonglassblower , here is to hoping it is allot stronger than stock. I will leave some results once it is recieved. On a side note i also got the "infamous" pipes daddy vapor bubbler a few days ago & with Ddave adapter mod it hit's like a champ and get nice and milky with no fan assist at about 200-210 deg. I am also using silicone tubing now. Im really liking it so far. The glass is pretty poor and not so thick so i'll have to be extra extra careful with it.
vaporist30
Member
Why the hell heating element with heating cover is moving left and right ( in all directions ! ) when i put cyclone bowl on the heater? ( not holds in place ). Thats crazy because all screws are tight ( four screws that holds heater cover in place )? Heater cover is not broken. Otherwise everything is fine, vape works ok, no combustion, no bad smell or anything else. No more warranty for me. Anyone with same problem? Sorry for my bad english.
i really cant resolve that shit. Please help
i really cant resolve that shit. Please help
Last edited:
The white high temp fabric must not be seated properly for even pressure distribution, its required to hold the glass snug. Otherwise the glass, or the plastic holder itself would have to be damaged.
I've got a crazy conversion mod for the EQ in mind, might have to pick up a used one to start experimenting on. I think I may be on to something... lol
I've got a crazy conversion mod for the EQ in mind, might have to pick up a used one to start experimenting on. I think I may be on to something... lol
Justpassedu
Well-Known Member
Got my right angle adapter pictured above from oreagonglassblower and glass is much nicer than stock. Packed up a DDave adapter with some finely ground herbs , 200 deg temp to start and used the the infamous bubbler and it got nice and milky. I don't know if its in my head but I felt like the whole setup just worked better with oreagonglassblower adapter. Better airflow and all , I did notice my silicone tubing got allot dirtier and somewhat brown closer to the adapter than it did with the stock elbow. Also elbow screen was a bit harder to fit but with a bending of the screen I got it right in there.
Tweak
T\/\/34|<
Glad it is working for ya,
. Care to share an image?Mike @ OGB is a real cool dude. I always recommend him, fast shipping and fast communication.
Justpassedu
Well-Known Member
Tweak np ill get a image up here when i have a chance its just a pain bc i have to upload to photobucket and than to here but ill put something up in the next few days .