Discontinued Omicron Vaporizer for oils

G

gnjagrwr

Member
Working on my 2nd g of shatter now in my kiss. Wondering if and when i should soak with iso? Everything looks clean inside and taste as well as preformance are on point. So i guess my ??? is, why/when should i clean? Thanks.
 
gnjagrwr,
S

StickyShisha2

Well-Known Member
both of my Kiss carts died last night. Both times, after my same friend loaded it. i suspect he pushed down on it. it looks like the break is where the resistance wire meets the nonresistance wire.

one had had about 6 grams (winterized) through it and never cleaned. the other was just started a day ago. Both were from the first shipment of Kiss carts to go out.

i knew i should have ordered a Ti Kiss carts at sale price but figured i would wait until all the Herc stuff i want was available.
 
D

disoriented

Well-Known Member
I have a 1300mAH Vision Spinner and want to try the kiss cart out. I've been using the Gentleman's Mega Oil V2 with less than stellar results. Wanted to try the new Ti KISS carts and know I'll need an adapter. Has anybody tried this yet? What options do I need to select on the ordering page. Obviously 3.7 volts, but what else?
 
disoriented,
PPN

PPN

Volute of Vapor
Hi THCscientific, I would to order filling tools and KISS cart but I can't find filling tools to buy in your website?

And I have a ego-battery w/omicron 1.5ohm cartridges, which KISS cart I need to order (I'm thinking the omicron lite cart but I'm not sure, I already get an adaptater ego/omicron cartridges...)?

Thanks
 
PPN,
T

thevaf

Well-Known Member
disoriented said:
I have a 1300mAH Vision Spinner and want to try the kiss cart out. I've been using the Gentleman's Mega Oil V2 with less than stellar results. Wanted to try the new Ti KISS carts and know I'll need an adapter. Has anybody tried this yet? What options do I need to select on the ordering page. Obviously 3.7 volts, but what else?
Click to expand...
You need this adapter to make the KISS work with a Vision spinner. On the w9 page you need to select the Omicron 2x or Persei style Kiss cart. The ophos style KISS will not work well with the 510-601 adapter I linked. either way its not going to look pretty, but it will work.


PPN said:
Hi THCscientific, I would to order filling tools and KISS cart but I can't find filling tools to buy in your website?

And I have a ego-battery w/omicron 1.5ohm cartridges, which KISS cart I need to order (I'm thinking the omicron lite cart but I'm not sure, I already get an adaptater ego/omicron cartridges...)?

Thanks
Click to expand...
Get the omicron lite/omicron 2.xx/persei style (i duno why these are separated on w9tech.com as they are all the same. The only one thats different is the Ophos because of the ego-style threading). For the filling tools, i would call them and they can set you up: 818-849-6133
 
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
thevaf said:
You need this adapter to make the KISS work with a Vision spinner. On the w9 page you need to select the Omicron 2x or Persei style Kiss cart. The ophos style KISS will not work well with the 510-601 adapter I linked. either way its not going to look pretty, but it will work.



Get the omicron lite/omicron 2.xx/persei style (i duno why these are separated on w9tech.com as they are all the same. The only one thats different is the Ophos because of the ego-style threading). For the filling tools, i would call them and they can set you up: 818-849-6133
Click to expand...

It is only separated to make it more easier for people to understand. I know what you mean it should not be because they are all the same but we do get an awful lot of "will the Omicron kiss work on the Omicron lite" type of questions.

@PPN we will put the fill tools up soon just trying to catch up on shipping. we just got overrun on orders and are trying to catch up on stuff.
 
THC SCIENTIFIC,
  • Like
Reactions: Caligula
T

thevaf

Well-Known Member
THC SCIENTIFIC said:
It is only separated to make it more easier for people to understand. I know what you mean it should not be because they are all the same but we do get an awful lot of "will the Omicron kiss work on the Omicron lite" type of questions.
Click to expand...

Thats what I figured.

Since you are releasing the Okeanos with the option of 601 or 510 threads, does this mean we will see a 510 threaded KISS in the future?
 
thevaf,
E

ez_ryder

Member
thevaf said:
Get the omicron lite/omicron 2.xx/persei style (i duno why these are separated on w9tech.com as they are all the same. The only one thats different is the Ophos because of the ego-style threading). For the filling tools, i would call them and they can set you up: 818-849-6133
Click to expand...

I'm a little lost... isnt the spinner the ego-c ? And if so, why wouldnt ego-style threading work with the ego ?
 
ez_ryder,
O

Omcron v1

Well-Known Member
Okay guys it's been a while but I'm back... I finally picked up some shatter and I am about to order a cart... Since it's shatter should I go with 2.4 or 1.5 I found my fill piece as well and plan on ONLY FILLING .5 This time after ruining numerous carts by filling .5 then an additional .5
 
Omcron v1,
  • Like
Reactions: poonman
poonman

poonman

Well-Known Member
Omcron v1 said:
Okay guys it's been a while but I'm back... I finally picked up some shatter and I am about to order a cart... Since it's shatter should I go with 2.4 or 1.5 I found my fill piece as well and plan on ONLY FILLING .5 This time after ruining numerous carts by filling .5 then an additional .5
Click to expand...

For me , I only prefer 1.5 carts now , they may work better for shatter . imo . I still have a couple of 2.4 empties sitting around .
You might want to look into their new KISS carts , Ti version too .

still rockin and enjoying my Omi-Lite .
 
deadheadbill

deadheadbill

I can see clearly now the smoke is gone...
Omcron v1 said:
Okay guys it's been a while but I'm back... I finally picked up some shatter and I am about to order a cart... Since it's shatter should I go with 2.4 or 1.5 I found my fill piece as well and plan on ONLY FILLING .5 This time after ruining numerous carts by filling .5 then an additional .5
Click to expand...

As Poonman says, if you are going with the traditional carts go with 1.5.

But, I rarely use those anymore. Seriously consider the KISS, it's all I use now.
 
Smoke1ForMe

Smoke1ForMe

Well-Known Member
deadheadbill said:
As Poonman says, if you are going with the traditional carts go with 1.5.

But, I rarely use those anymore. Seriously consider the KISS, it's all I use now.
Click to expand...

How many hits do you get when you load the KISS cart? I only use my omicron light on the go and it's nice not to have to continuously reload.
 
Smoke1ForMe,
kushcabbage

kushcabbage

vapor nerd
how well does the sr-74 for 3.7v work for oils? I love my kiss carts, only thing that gets me is having to clean the threads when the oil gets vaped. Always try to keep my carts upright but still they get very sticky. Also @THC SCIENTIFIC when will ti kiss carts for o-phos style thread going to be back in stock? thanks


ez_ryder said:
How much can you load in a O-Phos Kiss cart?
Click to expand...
as much as you would take a dab, bb size to smaller.
 
E

ez_ryder

Member
kushcabbage said:
how well does the sr-74 for 3.7v work for oils? I love my kiss carts, only thing that gets me is having to clean the threads when the oil gets vaped. Always try to keep my carts upright but still they get very sticky. Also @THC SCIENTIFIC when will ti kiss carts for o-phos style thread going to be back in stock? thanks



as much as you would take a dab, bb size to smaller.
Click to expand...
thx
 
ez_ryder,
O

Omcron v1

Well-Known Member
deadheadbill said:
As Poonman says, if you are going with the traditional carts go with 1.5.

But, I rarely use those anymore. Seriously consider the KISS, it's all I use now.
Click to expand...
I would consider the kiss carts but it's hard to come across wax and expensive so I'm more about conserving but to an extent that I can still be getting ripped so I'm thinking about the 1.5 cart I'm boutta go watch a couple more YouTube how to fill up videos before hahah
 
Omcron v1,
OF

OF

Well-Known Member
ez_ryder said:
How much can you load in a O-Phos Kiss cart?
Click to expand...

You can load a fair bit, but IMO should not. Best to load in the .05 to .1 gram (1/20 to 1/10), 1/5 to 1/10 what you might consider an optimum load in an Omicron cart.

deadheadbill said:
As Poonman says, if you are going with the traditional carts go with 1.5.
Click to expand...

I don't agree with that. And I think if you check carefully you'll note he said he (an experienced user) prefers them for shatter. That's a whole long way from 'new guys should get 1.5 Ohm carts with whatever they have', IMO. Experience makes all the difference here, and shatter calls for more heat typically.

I remain convinced new owners should stick religiously to 2.4 Ohm carts until they master the system. Really master it. Higher power carts can get out of control way too fast, wrecking them and the goods inside in the process. Leaks, burnt oil, feed problems, the lot await those newbies who jump in the deep end blind.

Guys who plan to "go watch a couple more YouTube how to fill up videos" and jump in are on thin ice IMO......first off, does anyone know a single such video on how to properly load a cart (per the W9 instructions), I sure don't.

Stick with 2.4s, weigh that cart dry, load no more than half a gram, follow the instructions on loading carefully (paying extra attention to the preheating of the center section), never do dry burns for any reason (including 'pre oxidizing'), be sure you're drawing air before you hit the button, and keep drawing after the hit until it cools off, add another .3 or so when you hit .2 from dry weight and you'll do much better.

Good luck in any event.

OF
 
E

ez_ryder

Member
OF said:
You can load a fair bit, but IMO should not. Best to load in the .05 to .1 gram (1/20 to 1/10), 1/5 to 1/10 what you might consider an optimum load in an Omicron cart.


OF
Click to expand...
thx - i thought 1/10 was about the right about
 
ez_ryder,
  • Like
Reactions: OF
ataxian

ataxian

PALE BLUE DOT
OF said:
I don't agree with that. And I think if you check carefully you'll note he said he (an experienced user) prefers them for shatter. That's a whole long way from 'new guys should get 1.5 Ohm carts with whatever they have', IMO. Experience makes all the difference here, and shatter calls for more heat typically.

I remain convinced new owners should stick religiously to 2.4 Ohm carts until they master the system. Really master it. Higher power carts can get out of control way too fast, wrecking them and the goods inside in the process. Leaks, burnt oil, feed problems, the lot await those newbies who jump in the deep end blind.

Good luck in any event.

OF
Click to expand...
I am using the SR74 attachment with a PERSEI.

However my drivers are 2.4 carts and I use these mostly.
The 5.0's I use as well however I need to use up my inventory!


1.5's I've never tried?
The K.I.S.S. carts I love!
 
ataxian,
  • Like
Reactions: OF
deadheadbill

deadheadbill

I can see clearly now the smoke is gone...
OF said:
You can load a fair bit, but IMO should not. Best to load in the .05 to .1 gram (1/20 to 1/10), 1/5 to 1/10 what you might consider an optimum load in an Omicron cart.



I don't agree with that. And I think if you check carefully you'll note he said he (an experienced user) prefers them for shatter. That's a whole long way from 'new guys should get 1.5 Ohm carts with whatever they have', IMO. Experience makes all the difference here, and shatter calls for more heat typically.

I remain convinced new owners should stick religiously to 2.4 Ohm carts until they master the system. Really master it. Higher power carts can get out of control way too fast, wrecking them and the goods inside in the process. Leaks, burnt oil, feed problems, the lot await those newbies who jump in the deep end blind.

Guys who plan to "go watch a couple more YouTube how to fill up videos" and jump in are on thin ice IMO......first off, does anyone know a single such video on how to properly load a cart (per the W9 instructions), I sure don't.

Stick with 2.4s, weigh that cart dry, load no more than half a gram, follow the instructions on loading carefully (paying extra attention to the preheating of the center section), never do dry burns for any reason (including 'pre oxidizing'), be sure you're drawing air before you hit the button, and keep drawing after the hit until it cools off, add another .3 or so when you hit .2 from dry weight and you'll do much better.

Good luck in any event.

OF
Click to expand...


I thought he was an experienced user. He said "I'm back". Misunderstood.
 
You must log in or register to reply here.
Top Bottom