Discontinued VapeXhale Cloud EVO

mscm888

Well-Known Member
Crank it up to 3 o'clock and you can make it dark brown. With it being golden in color there should be more goodies left in the herb.
 
mscm888,

b0

Cloudy...
Not to rain on the parade but this was definitely a mistake because while everything has been approved, we are still waiting for the component to arrive. Once they arrive (its an international part so hoping it clears customs quickly) assembly should only take a couple of days and off goes the INTL EVOs

That sounds like really soon!:brow:
 
b0,

Silent

HEY, HEY, HEYHEEEY, VAPE WEED EVERY DAY
Hope you mean IGG supporter and not actual preorder but thats great news! I have been itching to try a bonafide VXL vaporizer for years!
This is gonna make waiting for my email even harder!

Nope, I preordered on 27th September through the vapexhale website.

Not to rain on the parade but this was definitely a mistake because while everything has been approved, we are still waiting for the component to arrive. Once they arrive (its an international part so hoping it clears customs quickly) assembly should only take a couple of days and off goes the INTL EVOs

Well that's a shame. I hope this won't mess up my order because I checked and the funds have definitely left my bank account!
 
Silent,

vapemode

Member
Wow, this thing is amazing. I was using a volcano daily for a while, then switched to combustion for a minute. This wins. When I first got the volcaano, I was really impressed at the time by the german engineering of all the interlocking pieces. Now in comparison, the design on the Evo is so much smarter, more efficient, and more effective. Well done, guys.

I'm digging the geometric swagger logos (in the pre-order, it was shown with more of a street art tag.) The glasswork with the logos is solid / classy as hell. The HT is smaller than I thought it would be, not a bad thing.

At noon with a half-full ELB and medium-fine-grounds, I get flavor for days with thin vapor. You can get a good 8 or so rips before it feels like time for a reload. The hits get a little warm if you're not using cold water. Not completely satisfying spread so thin. At 3pm with a 3/4 full ELB and extra-fine grounds, I'm ripping through about 3 nice bong rips worth in 2 hits or so, blowing dragon clouds and forgetting how to use the unit. It's looking ~1:30-2:00 as sweet spot on mine. Just great.

I'm going to need to order some more ELB's stat.
 

Vapinghole

Low-Temp Hempist / JedHI Master
Wow, this thing is amazing. I was using a volcano daily for a while, then switched to combustion for a minute. This wins. When I first got the volcaano, I was really impressed at the time by the german engineering of all the interlocking pieces. Now in comparison, the design on the Evo is so much smarter, more efficient, and more effective. Well done, guys.

I'm digging the geometric swagger logos (in the pre-order, it was shown with more of a street art tag.) The glasswork with the logos is solid / classy as hell. The HT is smaller than I thought it would be, not a bad thing.

At noon with a half-full ELB and medium-fine-grounds, I get flavor for days with thin vapor. You can get a good 8 or so rips before it feels like time for a reload. The hits get a little warm if you're not using cold water. Not completely satisfying spread so thin. At 3pm with a 3/4 full ELB and extra-fine grounds, I'm ripping through about 3 nice bong rips worth in 2 hits or so, blowing dragon clouds and forgetting how to use the unit. It's looking ~1:30-2:00 as sweet spot on mine. Just great.

I'm going to need to order some more ELB's stat.

Love this review.
 

elmomuzz

That just happened...
A new record for cloud hits this morning. -9 fahrenheit. I lifted the bucket and sure enough it had not frozen. My first elb i turned a coffee shade in 2 hits. My second only got brown in 2. My third it only got golden and subsequent hits could do no better. Damn it's cold!! (Turned to max 24/7 in these conditions)
 

Lawnboy

Well-Known Member
A new record for cloud hits this morning. -9 fahrenheit. I lifted the bucket and sure enough it had not frozen. My first elb i turned a coffee shade in 2 hits. My second only got brown in 2. My third it only got golden and subsequent hits could do no better. Damn it's cold!! (Turned to max 24/7 in these conditions)

I think I have seen your posts before. Are you the guy that is keeping your evo in a shed? That last sentence makes me believe that you are keeping your unit on all the time, which would worry me. I'm sure that just like everything else there is a life span of the heating element. It seems like there would only be so many useful hours. I mean I hope that I still have mine around in 10 years, but I turn it off when I'm done with my session, it just seems like you could be doing damage. Is there anyway you could keep it in your house and just take it to the shed when you want to use it?

Just a concerned fellow Evo lover.
 

elmomuzz

That just happened...
I have electric base board heating in a house that is decades old. A heater is made to heat. It's not bad for it. In my opinion heating and cooling cycles is worse. And it takes forever for my evo to initially heat up when it's so cold. My original is still going strong running 24/7 and it will be 2 years old in april. Essentially I'm not to worried about it. :D
 

Lawnboy

Well-Known Member
Finally got my Evo yesterday, Hoooray!!!:rofl: I was an IGG contributor and have been looking forward to this for along time now. I am going to give my initial thoughts and review. I would first like to give my background on vaping. I probably hit my first vape about two years ago and I have only used a few units. I own the Vapir N02 which is a cheap, semi-portable vape that simply gets the job done. Other than the fact that it doesn't charge its batteries anymore, I do like it. I have also hit and handful of vape pens/ pax type vapes, which are pretty good for something so small. A good friend of mine has the Aromed. I LOVE the Aromed! As far as I know it is the only other vape to offer water filtration. I was actually on the verge of purchasing one when I stumbled across the cloud and decided to go for it. I was sure that the cloud would be as good as or better than the aromed, it definitely LOOKS a lot cooler.

Unpacking and initial thoughts...

I was beside myself with excitement. Opening the box and laying eyes on this unit was really cool. The bent neck HT is beautiful! I have never owned a high end piece of glass before, Ive broken too many cheap pieces, So I am a bit nervous about having this...

So I immediately plugged in the Evo and set it at 3. I then set about filling the HT. I'm assuming the bottom chamber is supposed to be dry? It seems to have 3 chambers and the top two hold water, unless I'm doing it wrong. Please advise..

Evo had turned green by this point so, I dialed it back to 12. It took several minutes for it to go green again. I then turned to the ELB. I have read here that people pack these things at a third to a half full. Well, it holds such a small amount, that I just went ahead and filled it.

Moment of truth..... I put it all together, and proceeded to take my first pull.... Disappointed.:huh: I only got a very thin, wispy, almost clear pull. Not like the big clouds puffs I had seen on videos. I tried again at the same setting, same result.. I then moved it up to about 2 and tried again for hits 3 and 4. I did get some visible vapor and a wonderful taste. Just not the big cloud that I was hoping for. I got about 5 or 6 pulls total from it before it started tasting off. I pulled out the ELB and the material was lightly browned. Darker than Im used to seeing from my N02.

I was definitely feeling good after my first session, it just wasn't what I had expected. I feel I may be doing it wrong or I have a faulty unit. All the videos I have watched of people using the cloud and evo show very thick, visible clouds. I blew mine at a lamp and it was barely visible.

Sorry for the long post. Could someone please advise if I'm even doing it right or how to trouble shoot to see if I somehow got a unit without the firmware upgrade.

Thanks and happy vaping!


I just wanted to give a quick update. Above is my initial post after just one session with the Evo. I would like to thank everyone that gave advice including @stonemonkey55.

I have since done A LOT more testing and I am happy to report that I am super impressed! I found that I was definitely over packing the ELB. It is strange to me but less is more when it comes to the ELB. I have found that I get tasty, cloudy pulls between 1 and 2 on the dial.

I seem to be more amazed and impressed every time I use this thing!

One major "problem" I am actually going through MORE herbs now because I cant keep my hands off it. Plus I have invited over several friends to try it out. I need a second job!


This is a great forum! Im glad I have found all you wonderful people to share this experience with!


Happy Vaping!
 

biohacker

Well-Known Member
I have electric base board heating in a house that is decades old. A heater is made to heat. It's not bad for it. In my opinion heating and cooling cycles is worse. And it takes forever for my evo to initially heat up when it's so cold. My original is still going strong running 24/7 and it will be 2 years old in april. Essentially I'm not to worried about it. :D

INCREDIBLE!

BTW for preorder, is it Swagger or bust for a package price? Or can one package an Evolver with an EVO ?
 
Last edited:
biohacker,

M00NEY

Well-Known Member
I just wanted to give a quick update. Above is my initial post after just one session with the Evo. I would like to thank everyone that gave advice including @stonemonkey55.

I have since done A LOT more testing and I am happy to report that I am super impressed! I found that I was definitely over packing the ELB. It is strange to me but less is more when it comes to the ELB. I have found that I get tasty, cloudy pulls between 1 and 2 on the dial.

I seem to be more amazed and impressed every time I use this thing!

One major "problem" I am actually going through MORE herbs now because I cant keep my hands off it. Plus I have invited over several friends to try it out. I need a second job!


This is a great forum! Im glad I have found all you wonderful people to share this experience with!


Happy Vaping!

We're squarely in the same camp. I like it over here too.
 
M00NEY,
I had an interesting experience last night with my EVO that I'd like to share.
So I basically worked 16hr days till my immune system gave me a big middle finger, and I came down with the flu a day and a half ago.
Normally I'm not much for vaping while ill, mainly because I don't get ill often, and never thought it would be beneficial.
Well after a day on the couch, where whining and moaning was frequent due too severe body aches, and varying body temps, I decided to go try some high temp vaping with the evo. Crystal Chunk (mmmm) was the strain, and it was good.
Well within 2-4 minutes, my body aches and all over weakness was nearly gone. It gave me enough energy to shower. It appeased my tummy, and allowed me to chow some much needed food and liquids.
I felt so much better mentally and physically after food, liquids, and a shower, what a blessing.
Now, it didn't cure me, or make me 100%, but I feel the pain management and appetite acceleration properties gave me the tools to take in what I needed to get out of what felt like the rock bottom of the flu.
Woke up this morning feeling about 90%! We are blessed to have such a beautiful plant, thank you cannabis and my favorite vape for taking good care of me!

Elsewhere, I've finally been really exploring the full spectrum of the evo. At first my evo was in turbo mode vaping EO and bubble with a few herb sessions in between.
Lately, it's been about half herb sessions and half bubble sessions. All I can say that I enjoy every which way this thing vapes, but for some reason, whenever I get a new cloud, I seem to move away from solvent extracted EO. It may just be me, or whatever, but this vape make me feel more "granola" than normal.
Thanks Vxl crew, best wishes everyone.
H.A.L
 

Hexi

Well-Known Member
Dark Brown ABV or bust! The first few attempts with the EVo many have similar results with yellowish ABV, just methodically work up the dial until you find your sweet spots.
 

exit

Well-Known Member
To anyone calling bullshit on ABV or EVO.

I vaped even at 4pm~ and did not get black ABV but the darkest brown. At noon it was just dark green but still gave lots of vapor. About 1/3 full gives ultra dark brown ABV. Super super super dark. Really happy with it.

Took me a really long time to write this...
 

biohacker

Well-Known Member
thanks exit! really making me drool! sounds like all the latest evo's are all working flawlessly as intended. Haven't heard of any combustion reports recently. Was that due to the bamboo cracking?

Are you saying you just ordered and 4 days later you had it? So there is no more wait and VXL is caught up or am I mistaken?
 
biohacker,
  • Like
Reactions: M00NEY
Top Bottom