Discontinued Vapolution 2.0

ataxian

PALE BLUE DOT
I wish I could move ataxian.

After 24years collecting disability I'm getting less money in a year then I made when I was 17 working part time for minimum wage. Now its almost like that old joke that "I'm to poor to pay attention".

I do hope to live long enough to see legal MMJ in Florida, But once it happens hope those that really need it can afford it.
I had to retire early from a 35 year career because of ATAXIA!
Lucky to live in CALIFORNIA.

Hopefully FLORIDA will modify their laws soon!
Can you grow your own medicine at least?
 

ataxian

PALE BLUE DOT
Just scored one off the classifieds with the aiwb and the regular. Probably will pick up a infuser and a vapor barrel after she gets here and i put her through the gauntlet.

Atax, whats your fave method?
I don't know if what I do is correct or not?

I keep the heat at about 9:00 PM on the dial once warmed up.
Yesterday and today I used it side by side with my other vapes.
This week it's the ALL IN WONDER BOWL tomorrow and Monday Vapor Barrel. I use my SOLO and NANO WET and the VAPOLUTION I use DRY!

Don't let the price scare you away.
Funny this thing is cheap however "FLAVOR GALORE"!

I favor the ALL in Wonder BOWL and VAPOR BARREL!
 

petey1

Well-Known Member
Can anyone sway me to this vape? I am concerned about not being able to use ground product which I prefer to do. It seems more efficient to me to do this. Secondly, I don't know if I like the 5 minute warmup.
 
petey1,
  • Like
Reactions: ataxian

ataxian

PALE BLUE DOT
What's so great about the barrel?
And have you vaped the infused flower yet?
Just had my "WAKE & VAPE" with the BARREL.
I get nice clean vapor with it. (plus medicated)

The "INFUSER" I have used only once.
The flowers that I vaped were strong.
I will study it again this week.
Their so cheap it's not a risk to try all these attachments!

I throw away my ABV and make my concentrates from colas!

FLAVOR is subjective!
 
ataxian,

stickstones

Vapor concierge
Can anyone sway me to this vape? I am concerned about not being able to use ground product which I prefer to do. It seems more efficient to me to do this. Secondly, I don't know if I like the 5 minute warmup.

Nothing in that post points to someone who wants this vape, since it uses unground bud and mine works best after 15 minutes of warmup. I would not recommend this vape to someone who's first priority was fast heat up time. You can probably leave it on a long time, but even then I like to wait around two minutes after inserting the stem for it to warm up.

Instead, I would challenge your perception of ground bud being more efficient to use. I always felt this way since more surface area = more vapor. But after using the VAP2, I'm convinced that we are beating up our weed when we grind it and knocking good stuff off. That's why we have kief and sifters and shit. I think putting in a mostly unmolested pellet is stronger than the putting in ground up weed. And the extraction is always thorough. I've never crushed a spent pellet and found anything green in the middle.

But make no mistake, this is a session vape. You don't want to hit it once and then take the stem out and hit it later. You will lose some actives in the multiple heat up. You want to finish that pellet in one sitting if you are after efficiency.

This vape is the Ace of Spades for the person wanting the best taste at the best price from an effective vape. That's the guy who will be blown away by this vape.
 

petey1

Well-Known Member
Nothing in that post points to someone who wants this vape, since it uses unground bud and mine works best after 15 minutes of warmup. I would not recommend this vape to someone who's first priority was fast heat up time. You can probably leave it on a long time, but even then I like to wait around two minutes after inserting the stem for it to warm up.

Instead, I would challenge your perception of ground bud being more efficient to use. I always felt this way since more surface area = more vapor. But after using the VAP2, I'm convinced that we are beating up our weed when we grind it and knocking good stuff off. That's why we have kief and sifters and shit. I think putting in a mostly unmolested pellet is stronger than the putting in ground up weed. And the extraction is always thorough. I've never crushed a spent pellet and found anything green in the middle.

But make no mistake, this is a session vape. You don't want to hit it once and then take the stem out and hit it later. You will lose some actives in the multiple heat up. You want to finish that pellet in one sitting if you are after efficiency.

This vape is the Ace of Spades for the person wanting the best taste at the best price from an effective vape. That's the guy who will be blown away by this vape.


Wow. That's a heck of a post. I have some thinking to do. I'm definitely the guy who doesn't want to spend an arm and a leg.
 

deadheadbill

I can see clearly now the smoke is gone...
This vape is the Ace of Spades for the person wanting the best taste at the best price from an effective vape. That's the guy who will be blown away by this vape.

I would add simplicity. I originally bought the Vap2 because of the recommendations in here, it's price, and it's simplicity.

My wife was/is not very knowledgeable about vapes. With the Vap2 it is impossible to combust and gives great extraction with VERY little technique. Also, I can leave it on with weed and the AIWB beside it and all you have to do is load the material and go. Blow out the abv in the trash and do over.
 

RUDE BOY

Space is the Place
I've been using the Vapolution for around a month. For me 5 minutes heat up time then inserting the bowl for a minute before hitting and I'm good to go.

Starting off with a little less vapor but huge taste is nice. The Vapor is pretty dense after a few hits. And the second bowl is always Rockin'. Priced at $99 to your door I think it has to be hands down the best buy in the vaporizer market right now, Everyone should check out the Vapolution IMHO.


edit: Five minutes isn't really very long to heat up for the quality of vapor the vapo 2 provides. I own a number of portables and most seem to really take the same amount of time to start giving their biggest hits or producing vapor clouds.
 
Last edited:

stickstones

Vapor concierge
Wow. That's a heck of a post. I have some thinking to do. I'm definitely the guy who doesn't want to spend an arm and a leg.

Every vape has its pros/cons and ins/outs. If you check my sig you'll see way too many vapes, but I end up with a good vape for just about any circumstance. @deadheadbill is right...the VAP2 is vaping simplicity (with electricity) to the max. It's the home based vape the buddha would have used. I can tell you that after acquiring all these vapes, if I had to start all over again I would get the VAP2 first. I think everyone should have one. It's the cheapest plug in vape I can think of (with the fc discount) and still tastes better than any vape I have ever tried...go figure! It's still one of my five favorite vapes and one of my must haves.

If that doesn't make you want it then you and I are after different things in our vapor experience.
 

Goodlife101

Living The Good Life
I tell everyone they need to own a vapo 2.0.. IMHO and I am like many other I invested quite a bit of cash in vapes and accessories but if I had to do it all over again this would be my only purchase. The way I see the market you have the 50-130 dollar vape range the 130-350 price range and what i consider high end 350+.. for the money I would rather get the vapolution than any of the mid range vapes or save up and go balls deep on a really nice unit like a cloud or sublimator or herbalizer. without those options the vapo 2.0 still has my vote and I tell all of my friends new to vaping the same thing. However I do also recommend the EV2 right now while he has them for 50% off that is a killer steal as well putting that thing in the 130 range. the Vapo 2.0 is my workhorse though and I love the conservation. I was always a log style fan but the vapo 2.0 to me is almost a versatile glass version of a log vape.


btw my infuser gets here today and I am stoked to try it out. I wish the vapo team would make a water vapor tamer or some sort of nice bowl/attachment that gives some water filtration cooling while keeping this bad boy 100% glass
 

RUDE BOY

Space is the Place
A line of glass accessories would be nice. Love the look of the custom glass that people like clear dome made for the PD. I know I would pick up a new stem or watertool every few months to keep mixing things up.
For now the Infuser and the straight shooter are getting used a lot. My infuser is ready to harvest for the second time. This mornings breakfast was served with a little honey on the lips.
 

Goodlife101

Living The Good Life
how many sessions do you run your infuser before you pull out the goodness? someone needs to make a supernug video and blow peoples minds...

and yeah I agree i feel like custom glass for this thing wouldnt be hard and they could make all sorts of water attachments. basically I would make a tube with percs that rests in the plastic dimple up top (so it doesnt put any strain on the bowl and is the right adjusted height so the bowl doesn't go all the way in to the bottom) around the entrance to the heater and has gaps or is star shaped so air can still get in and it just uses that to sit and has a little tube/bowl just like how they are now coming out of the bottom. complicated description but easy to implement i wish i could draw you a picture
 
Goodlife101,

ataxian

PALE BLUE DOT
how many sessions do you run your infuser before you pull out the goodness? someone needs to make a supernug video and blow peoples minds...

and yeah I agree i feel like custom glass for this thing wouldnt be hard and they could make all sorts of water attachments. basically I would make a tube with percs that rests in the plastic dimple up top (so it doesnt put any strain on the bowl and is the right adjusted height so the bowl doesn't go all the way in to the bottom) around the entrance to the heater and has gaps or is star shaped so air can still get in and it just uses that to sit and has a little tube/bowl just like how they are now coming out of the bottom. complicated description but easy to implement i wish i could draw you a picture
I use the VAP 2 dry and find it smooth!
Water for the heavy hitters!
 

RUDE BOY

Space is the Place
I lost track of how many sessions I did with the loaded infuser. It took me three weeks to take it how it is now with oil drawing into my mouth. I could have emptied and refilled it with fresh a week ago and it would have been killer, now its just that much better.

I was just looking at the bowl of the infuser and with a gong adaptor of the right size seems like there's a way to place a hydro tube like the PNWT straight on top since it has the beads welded on it to stop the bowl from hitting the bottom of the heater.......... I may just try some silicone tubing over the top of the bowl above the beads, a good seal with the GBD mini tube I'm good.

edit; to correct what I said above. Actually it's been two weeks with heavy use since filling my infuser. I vaped up the first infuser load on New Years day. It was wonderful.
 
Last edited:

deadheadbill

I can see clearly now the smoke is gone...
What a wicked little vixen this baby is. She lures you in with low price. Flashes her all glass airpath at you and teases you with high extraction.

Then you load her up with some good Sativa and she bitch slaps you across the face with clouds, She punches you in the gut with an immediate high and body slams you with massive stoneage. Vape slut.
 
Top Bottom