Arizer Solo

shadyonedeath

shadyonedeath

Well-Known Member
Dreamerr said:
Well looks like I will be getting a new solo :rofl:. I am going to wait a bit longer for my info or pipes and OF to take the plunge first :lol:. This is actually now looking up to be a great option barring any damaging info about batts and stuff we learn from the masters:tup:. Now if that all shakes out to be ok on the batts I would say PA all the way so that means extra in the solo purchase as it was in da old days. Maybe if again this shakes out to be ok arizer will change the stock charger to the PA type:shrug:
Click to expand...
Why a new one?

mwm1994 said:
What is the newest current model for the Solo? Some are saying M1C1 and some are saying the M1D/1/2/

Also where is the best place currently to purchase one? Been searching for about an hour and most are out of stock or look dodgy. Prefer somewhere cheap and that has the new models. I'm in the UK but don't mind buying from the USA.

thanks
Click to expand...
Puffitup is a reliable source for me. You might have to email them about their current models available.
 
Last edited by a moderator:
shadyonedeath,
Pipes

Pipes

Addicted DIY Enthusiast
Accessory Maker
Dreamerr said:
They aren't models but serial numbers but the new batches C's and D's have the new feature so of course having VAS I NEED one :rofl:.
Click to expand...
Has it been verified the all the Cs are updated? We know some are but are all? Also, the Cs seemed to be short lived as a production so might not be an issue..
Maybe I missed something?
 
Pipes,
Snappo

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
I really super lucked-out recently! Getting a new 1 month old Solo barely used (M1A4) just like the proven one I already have and love. And also a new/barely used E-Nano. Christmas came for me after all!!! I am blessed!
 
ataxian

ataxian

PALE BLUE DOT
Dreamerr said:
Well looks like I will be getting a new solo :rofl:. I am going to wait a bit longer for my info or pipes and OF to take the plunge first :lol:. :shrug:
Click to expand...
Same here!
I just had a deep nap after my SOLO session.
My tolerance is so low now!

0.20 grams of flowers and 0.10 grams CO2 OIL and it put me out like the eighties!
At this rate I will never run out of medicine!

Plus My DUTCH CRUNCH is awesome!

My CANNABIS toys are doing a fine job.

I had to buy more stuff for medicating because I was lurching while on vacation.

Now that's all I want is a 3rd SOLO!
Like you @Dreamerr I don't need one however I want one!

Not having CANNABIS for 10 days was brutal for me!

HAPPY is all I can say!

Being, "OFF THE GRID", was strange however refreshing!

If you find me excessive please rebuke me!
Snappo said:
I am blessed!
Click to expand...
VERY WELL SAID!
shadyonedeath said:
Why a new one?
Click to expand...
@shadyonedeath "BECAUSE"!

There are needs and wants!
 
Last edited:
Pipes

Pipes

Addicted DIY Enthusiast
Accessory Maker
Dreamerr said:
@Pipes , as I recall some C's had it and some didn't, but we were dealing with new users so :shrug:
Click to expand...
We also have the new information to deal with. @Caligula's post is new as the charge and heat lights are ON AT THE SAME TIME. IIRC, others had reported the charge going off while heat is on. Maybe I'm wrong?
Caligula said:
@ataxian let's get it on breh!

BTW, no step down adapter needed to do this with my M1D2... ;)

zb4g.jpg
Click to expand...
With the current OEM supply we know it is simply impossible due to not enough juice. I can see some power assist possible with some careful programming controlling power ratios from batteries and external power input to heater. While also playing with the charging circuits at the same time.
But as we have mentioned many times now. This is great and all but at what cost? It is fact that using like this will be hard on the batteries. But by how much? Of course there's always the warranty so we are back to the ol' "time will tell".
Regardless, the Solo is great what ever model you get. There are always workarounds.:D
Dreamerr said:
Well looks like I will be getting a new solo :rofl:. I am going to wait a bit longer for my info or pipes and OF to take the plunge first :lol:. This is actually now looking up to be a great option barring any damaging info about batts and stuff we learn from the masters:tup:. Now if that all shakes out to be ok on the batts I would say PA all the way so that means extra in the solo purchase as it was in da old days. Maybe if again this shakes out to be ok arizer will change the stock charger to the PA type:shrug:
Click to expand...
You go girl. A slight flaw in the theory. The Solo is a smart cookie indeed. However, it has no way to tell if the attached supply is rated high enough or not. It sees the 12 volts and that's it. So the function is designed around that information only. The maximum current draw will be programmed to match the OEM supply.
Now it could be altered but it would blow out there current supplies. I know, I just gave @Dreamerr a headache....opps

And Welcome back there @ataxian

ff_futurama3_630.jpg
 
Last edited:
E

exit

Well-Known Member
Dreamerr said:
I wonder why exit. Maybe the way you draw:shrug:. I get nice size clouds on 3. I don't recall trying two but have dragged on two while warming up. Maybe make a vid if you feel like it but I say as long as you are getting what you need all good.:smug:

What snappo says too but I still get clouds :rofl::rofl:and so does many of us. I take very short hits as you know less then ten seconds and I don't hold it in long which can account for some in the exhale.
Click to expand...

i don't mind making a video at all but i always get huge thick and great tasting (imo) clouds at heat 6, whereas i have not gotten anything but wisps with lower temps. i will admit i still find drawing on the solo to be tricky!

also yes i do have a new model solo, i def do think the temp calibration is a little different than my old solo was.

i have a pvhes supposed to show p soon so maybe....
 
Quetzalcoatl

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
exit said:
i don't mind making a video at all but i always get huge thick and great tasting (imo) clouds at heat 6, whereas i have not gotten anything but wisps with lower temps. i will admit i still find drawing on the solo to be tricky!

also yes i do have a new model solo, i def do think the temp calibration is a little different than my old solo was.

i have a pvhes supposed to show p soon so maybe....
Click to expand...
See with mine I can thoroughly vape a full stem at 3 with nice visible clouds and at 5 it chokes me out hard. I don't bother with anything higher than 4 dry with my current stash. 5-6 produce sufficient clouds for my tubes to milk up but too warm for my liking otherwise.

Too bad they're out of stock for the female 18mm stem.
 
vv132

vv132

Active Member
hey guys with the m1d2 model , what have u found ur best level temp for "thick clouds"? having trouble finding the right level right now.
 
vv132,
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
@exit, you may have answered you own question with the newer model being the answer. BTW in some way or a lot of ways the pvhes gives you less not more vapor but it makes the draw easier.

Now on that note since I was messing with glass and the PN today I had many different solo sessions. I know that makes no sense but I did a mod had a session on the pn then I was like yea but I love that setup on the solo. So I have done the chillum on the gong...very nice, and well didn't try the rest but was using the bent stem for something and damn. Ok ramble for no reason anyhow....

I haven't used a stock stem in a long time. I had stock bent with oring on three and my room was cloudy with a chance of meatballs. Gotta love the solo right taxi? Many different ways to use it and all a different experience so you can't get bored.
 
Quetzalcoatl

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
exit said:
i don't mind making a video at all but i always get huge thick and great tasting (imo) clouds at heat 6, whereas i have not gotten anything but wisps with lower temps. i will admit i still find drawing on the solo to be tricky!

also yes i do have a new model solo, i def do think the temp calibration is a little different than my old solo was.

i have a pvhes supposed to show p soon so maybe....
Click to expand...
Heres a picture I just took for comparison. Stock stem, loaded and put it in as I turned it on to 3. Waited 1:45 and went a full 12 minutes. I think I've already mastered my technique lol.

Excuse the dirty printer.

IK9HDAEl.jpg
 
zymos

zymos

Well-Known Member
Pipes said:
We also have the new information to deal with. @Caligula's post is new as the charge and heat lights are ON AT THE SAME TIME. IIRC, others had reported the charge going off while heat is on. Maybe I'm wrong?
Click to expand...

Myself and at least one other user have been reporting this for a week or 2 now. But we are both using the charger, Caligula is using the PA?
 
ataxian

ataxian

PALE BLUE DOT
Quetzalcoatl said:
I don't bother with anything higher than 4 dry with my current stash. 5-6 produce sufficient clouds for my tubes to milk up but too warm for my liking otherwise. Too bad they're out of stock for the female 18mm stem.
Click to expand...
I have 18mm GonG and need a 14mm.

We all have different reasons for using CANNABIS!
Some like a large milked up water pipe and big rips!
For me it's not the "HOLY GRAIL" correct way just my way:

Twin Female Tee.
one side GonG - the other side tube adapter used as a carburetor.
ASH COLLECTOR
SHERLOCK

TOP SHELF INDICA

CALIFORNIA is not bad!
zymos said:
Myself and at least one other user have been reporting this for a week or 2 now. But we are both using the charger, Caligula is using the PA?
Click to expand...

I have 3 PA's

"OF" = work well
TIM's = works well
PIPE'S = works well
I started with "OF's" about a year ago?

"PA's are great for Medical Room's!
Dreamerr said:
@exit Gotta love the solo right taxi? Many different ways to use it and all a different experience so you can't get bored.
Click to expand...

Very Well Said!

I really love my SOLO'S.
One of mine is OVER 2 YEARS OLD!
Works perfect!

TOP SHELF INDICA!

"God", I love California!
 
Last edited:
Pipes

Pipes

Addicted DIY Enthusiast
Accessory Maker
zymos said:
Myself and at least one other user have been reporting this for a week or 2 now. But we are both using the charger, Caligula is using the PA?
Click to expand...
Thanks, I never thought it was indicating both charge and heat at the same time during the session. I thought it was heat and when heat is off then charge. Guess it could be called presumption reading?
Caligula is also using the charger, just a beefed up 5 amp unit which is supplied with my PA system.
Thanks again for clarifying for me.
 
R

roosh420

New Member
I've been using my m1c1 solo with the new features for a while. Now I don't know if I'm being paranoid but there is a slight smell of burnt toast that comes from it when I use it. And I've been experiencing itchy lungs when I vape and for a little while afterwords. Is this normal? Does anyone else get an itchy feeling deep in their lungs when vaping? Or could there be something wrong with my device?
 
roosh420,
olivianewtonjohn

olivianewtonjohn

Well-Known Member
The burnt toast sounds like extracted flower smell? Do you keep your ABV or can smell it next time you extract a bowl? Does it smell the same?

Itchy lung doesnt sound good but could be due to dry vapor? I get a itcy cough sometimes from an itcy throat so I drink something. Are you doing it dry or with water? If dry do you have access to a water pipe or can you make one to try?
 
You must log in or register to reply here.
Top Bottom