Discontinued Pinnacle Pro
- Thread starter stickstones
- Start date
BLAZING OG
Vaping is a way of life!
Yeah organic cotton, some like the organic un bleached.
Most concentrates wax.oils, budder, shatters,taffys, etc etc., can all be used smeared in a piece of cotton. The FMJ doesnt seem to work well for me , but the oil or wax in the cotton ball does.
A small dab will go a bit longer since your cooking it at a lower temp than normal.
Just smear some on the cotton and roll the cotton up so the oil is wrapped in side the cotton, that way theres no chance of oil leaking as it saturates that part of the cotton and vapes away before it can run anywhere.
Hope this Helps
Sometimes this is the best way to figure out a deviceIts obvious I tested the vape "while" reading the literature rather then reading the literature first
It is fun isnt it
Glad your enjoying this little guyI would suggest the cotton trick with oils , the FMJ just doesnt seem to get it done right.
Nice set up's !!
EDIT
I know its been talked about using no2 screens , but id love to be able to use the rimmed screens like the Extreme q set up.
Does any one that has the eq screens ( or similar cloud, etc,etc) and pinnacle or pinnacle pro bullets know if it will fit with training the screens into bullet ???
Any Help would be appreciated!
Sorry I searched like a mad man and didnt find it but I swear someone posted a pic of it, I swear this time I will write it down and not be such a forgetful stoner.
Time to search the og pinnacle thread!!
https://arizer.com/store/en/arizer-parts/41-dome-screen-pack.html
http://www.vaporizerkits.com/products/Arizer-Mesh-Screen-Pack.html
http://www.dreamherbs.com.au/Dome-Screens-Rimmed-12mm.html
http://vapenow.com/extreme-screen-set-p-309/
Would these work?
They look rather large, but the zoom can have that effect!?
Last edited:
I know its been talked about using no2 screens , but id love to be able to use the rimmed screens like the Extreme q set up.
Does any one that has the eq screens ( or similar cloud, etc,etc) and pinnacle or pinnacle pro bullets know if it will fit with training the screens into bullet ???
Any Help would be appreciated!
Sorry I searched like a mad man and didnt find it but I swear someone posted a pic of it, I swear this time I will write it down and not be such a forgetful stoner.
Time to search the og pinnacle thread!!
https://arizer.com/store/en/arizer-parts/41-dome-screen-pack.html
http://www.vaporizerkits.com/products/Arizer-Mesh-Screen-Pack.html
http://www.dreamherbs.com.au/Dome-Screens-Rimmed-12mm.html
http://vapenow.com/extreme-screen-set-p-309/
Would these work?
They look rather large, but the zoom can have that effect!?
Would also love to know if any of these work. Especially the dreamherbs screens.
RUDE BOY
Space is the Place
@BLAZING OG I believe you would need around a 9mm screen.
BLAZING OG
Vaping is a way of life!
Thank you, thats a start
, Now to research the screen sizes.Thanks to @RUDE BOY I know that we might need a 9mm screen, the dreamherbs is cool but it says 12mm, maybe it can be trained to be a 9mm by elongating it , not sure.
Some one on one of these threads ( I read both) had posted what I think is the EQ rimmed screen shoved in a 14mm combustion bowl to train the shape for the bullets.
If I find it Ill post it, but I might just bite the bullet and order a few different version and experiment.
Last edited:
CarolKing
Singer of songs and a vapor connoisseur
It would be nice to see a screen that would fit exactly for the pnp. I have used scissor to cut down a screen that is too big for the pro and has worked fine. Lately I have been using just cotton on the tip of the bullet and it works better, plus it keeps the screen clean.
I think sometimes we want to make things more difficult than it needs to be.
I think sometimes we want to make things more difficult than it needs to be.
Last edited:
chimpybits
Well-Known Member
Hmm, interesting. My NO2 screen def needs some scrunching to fit in the bullet. Same as al bundy's original post.
It might fit without scrunching if I just put the screen on top as I think the hat/bowl part of the screen will fit in the bullet with the rim extending beyond the bullet (thereby resting on the top of the chamber). In this way it would fit loose on top of the bullet instead of scrunched and fitting tight. I don't have another one to try and post a pic.
Sativape
Well-Known Member
Yeah organic cotton, some like the organic un bleached.
Most concentrates wax.oils, budder, shatters,taffys, etc etc., can all be used smeared in a piece of cotton. The FMJ doesnt seem to work well for me , but the oil or wax in the cotton ball does.
A small dab will go a bit longer since your cooking it at a lower temp than normal.
Just smear some on the cotton and roll the cotton up so the oil is wrapped in side the cotton, that way theres no chance of oil leaking as it saturates that part of the cotton and vapes away before it can run anywhere.
Hope this Helps
Sometimes this is the best way to figure out a device
It is fun isnt it
I would suggest the cotton trick with oils , the FMJ just doesnt seem to get it done right.
Nice set up's !!
EDIT
I know its been talked about using no2 screens , but id love to be able to use the rimmed screens like the Extreme q set up.
Does any one that has the eq screens ( or similar cloud, etc,etc) and pinnacle or pinnacle pro bullets know if it will fit with training the screens into bullet ???
Any Help would be appreciated!
Sorry I searched like a mad man and didnt find it but I swear someone posted a pic of it, I swear this time I will write it down and not be such a forgetful stoner.
Time to search the og pinnacle thread!!
https://arizer.com/store/en/arizer-parts/41-dome-screen-pack.html
http://www.vaporizerkits.com/products/Arizer-Mesh-Screen-Pack.html
http://www.dreamherbs.com.au/Dome-Screens-Rimmed-12mm.html
http://vapenow.com/extreme-screen-set-p-309/
Would these work?
They look rather large, but the zoom can have that effect!?
@BLAZING OG
Thanks for posting all the links!
Kaptan
Well-Known Member
Settings 4 and 5 are for concentrates. I don't think the OG PN will get hot enough for concentrates.
Jimmy
Member
i have these cotton balls
http://www.cvs.com/shop/product-detail/CVS-Triple-Size-Cotton-Balls-100-Cotton?skuId=864741
will these be good for oils and wax in the bullet or do they need to be organic.
also anyone tried scraping out the mp tip? theres some good oil in there.
http://www.cvs.com/shop/product-detail/CVS-Triple-Size-Cotton-Balls-100-Cotton?skuId=864741
will these be good for oils and wax in the bullet or do they need to be organic.
also anyone tried scraping out the mp tip? theres some good oil in there.
CarolKing
Singer of songs and a vapor connoisseur
I have like 5 pongs for my 3 Pinnacle Pros, 2 of the pongs fit nice and snug, the other 3 pongs fit so loose I'm afraid the WT will fall off.
I have broken a WT with a loose pong. They are not cheap to replace, even at the $69 price.
Has anyone had a hard time finding the right fitting pong for the pnp? When at home I've just been using the WT with the unit.
The pro is a hard working powerful little machine.
The best flavor is the first five minutes of fresh herb. Flavor does diminish after that but with the WT it's better.
When I use the mouthpiece I can only have the unit at the lowest heat level, level 2 most of the time is too harsh for me. It depends on the herb too, some herb is mild on the throat and some not.
I have broken a WT with a loose pong. They are not cheap to replace, even at the $69 price.
Has anyone had a hard time finding the right fitting pong for the pnp? When at home I've just been using the WT with the unit.
The pro is a hard working powerful little machine.
The best flavor is the first five minutes of fresh herb. Flavor does diminish after that but with the WT it's better.
When I use the mouthpiece I can only have the unit at the lowest heat level, level 2 most of the time is too harsh for me. It depends on the herb too, some herb is mild on the throat and some not.
Last edited:
chimpybits
Well-Known Member
Yeah I find that my PONG-glass joint connection is much tighter than my PONG-PNP fit. Hence if I try to lift the WT off the PNP instead the WT and PONG come off together leaving the PNP body. It was even worse for me with cotton on top of the bullet as the cotton would stick to the PONG screen so lifting the WT off resulted in the WT+PONG+cotton+bullet all dangling attached. I always end up separating the PONG from the WT afterward. It's not really a bother - just inelegant.
I also find I can only really manage level 1 dry, but I'm hoping I can manage level 2 once my cough is over. I do think if I can't manage level 2 dry, then this is a less desirable portable for me. I'll see how a short length of tubing improves things. I'm also looking forward to trying the cotton+oil in the bullet as others have done. I have some cotton+reclaim from my SSV wand. Though I don't see myself able to manage level 4 or 5 dry if I can't manage level 2 with flowers.
In my opinion, the PNP has to be fine on level 2 dry with flowers. If it requires the WT, then it's portability is compromised. I've still only used my PNP a few times as I stick to my SSV at home and only want a portable for out-and-about.
TromaRon
Well-Known Member
I like the NO2 screens. At first I used them like you mention, resting on top. But I got tired of the bullet not wanting to come back out, so I trimmed the wide edge off the screen. Now it fits right inside the bullet, and if I want to just fill a bullet part way, I can just push the screen in a little farther.
chimpybits
Well-Known Member
Good idea. I'm gonna pick up another little hat and trim it!
BLAZING OG
Vaping is a way of life!
Kenzie
Well-Known Member
I have just ordered a PnP and the WT but would like to get some more glassware to go with it. Are there any adapters to make the PnP fit a 18.8mm stem? or any 18.8mm male to 14.4mm female adapters? im having trouble finding any of these products anywhere. i dont mind just running a bubbler with a 14.4mm stem but would like the option of a 18.8mm.
chimpybits
Well-Known Member
I see that glassblowersdirect have such an adapter. There is also a thread for gbd in the Glass section.
stickstones
Vapor concierge
post this just once in the right thread, please. I replied in the cheap bubbler thread
Any chance you can explain what glass/water pipes to buy? And what attachments?
I see 14.4 and 18.8 and pwnt and pong, etc, etc.
I'm assuming there are many different types of glass that work with the pinnacle pro? You just have to buy the right size or something right?
I really don't want to have to read 100 pages to find the answer.
Kaptan
Well-Known Member
A
Anything that has a 14 mm GONG joint will work.
Sativape
Well-Known Member
@ Deadshort480,
I've been using the tip.
It does get gummed up pretty quickly but I find that I'm able to slow down the flow with it.
I've been cleaning the MP tip with pipe cleaners and warm water and soap.
Been popping out the screens out the MP ad Pong and using the Magic Eraser to clean it out.
Also been using the Magic Eraser to clean out the PNP chamber.
My friends and I thank you for your post about using it.
If we ever cross paths, the first round bullets are on me!