• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Omicron Vaporizer for oils

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
For your Portable Vaporizer the Okeanos ( Temp Name ) is ready for pre order.

It you have two choices 510 or 601 threading, this allows you to order one for your vaporizer even if its not from Utopia Planitia Technologies.
Also please help us spread the word on the this wonderful little device and help us bring new technology to the people by sharing this post.

http://www.w9tech.com/okeanos-temp-name/
 
THC SCIENTIFIC,
  • Like
Reactions: ataxian

CanadianColorado

New Member
For your Portable Vaporizer the Okeanos ( Temp Name ) is ready for pre order.

It you have two choices 510 or 601 threading, this allows you to order one for your vaporizer even if its not from Utopia Planitia Technologies.
Also please help us spread the word on the this wonderful little device and help us bring new technology to the people by sharing this post.

http://www.w9tech.com/okeanos-temp-name/
Will the Okeanos also fit current KISS cartridges or only the new Ti KISS carts.? Any idea when you'll have Ti coil KISS cartridges available individually? LOVE my KISS but the idea of the Okeanos and the water pass through system in addition to Ti coils is extremely appealing.
 
CanadianColorado,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Will the Okeanos also fit current KISS cartridges or only the new Ti KISS carts.? Any idea when you'll have Ti coil KISS cartridges available individually? LOVE my KISS but the idea of the Okeanos and the water pass through system in addition to Ti coils is extremely appealing.

The Okeanos will work with all kiss carts current and the Ti GR 2 thats coming up.
 
THC SCIENTIFIC,

toddious

Active Member
The current cartridges work fine once mastered. A simple procedure helps prevent clogs and leaks.


1. Always inhale like 1/2 second before you press the button.
2. Keep inhaling after you let go of the button.
3. Inhale to cool the cartridge down between hits.
4. Load no more then 0.6
5. Rinse Repeat

Yes- I follow the above instruction. However, the unit requires a cleaning of the inner hole quite often. I guess I was just wondering about a Ti Coiled version?

So all future W9 carts will be LAyG style?
 

Zee007

Member
Does anyone's kiss cart build up a rough black burnt clump that covers some wire on the coil? or does that mean my concentrate is very impure? I even dropped the kiss in 70% iso for 30min and the black burnt residue didn't come off.
 
Zee007,
  • Like
Reactions: OF

FeelingFactory

Well-Known Member
Does anyone's kiss cart build up a rough black burnt clump that covers some wire on the coil? or does that mean my concentrate is very impure? I even dropped the kiss in 70% iso for 30min and the black burnt residue didn't come off.
This could indicate impurities, similar to a dab that leaves black junk on the nail and/or dabber. Are you using bubble hash or anything dark and goopy? Your extract type and quality would be a good place to start.

On another note, I've noticed residual hash that collects in the KISS ceramic cup below the heater is difficult to scoop with a metal pick, as the ceramic cup gives and tries to spin with the pick instead of staying in place while scooping. I didn't proceed so as to not damage the unit. Is this an issue for other shatter users, or is the only way to reclaim the bowl by using alcohol? The attempt of scooping of the hash below the heater took place after a hit so it was warm, but still started to spin the ceramic regardless. Thanks in advance for any input, fellow KISS users!
 

OF

Well-Known Member
Does anyone's kiss cart build up a rough black burnt clump that covers some wire on the coil? or does that mean my concentrate is very impure? I even dropped the kiss in 70% iso for 30min and the black burnt residue didn't come off.

This would be the same burnt on 'junk' that's fouled out this heater from an Omicron cart?


Yup, it's the stuff other than THC in the concentrate, some have more, some less. This is what the foil test is intended to screen for (gross cases at least). How does your concentrate do in a foil test?

Once it's been burned on, it's there to stay. ISO won't touch it. The part above was run a couple minutes in the ultrasonic in 91% ISO to get the oil out of the way. You can see some deposits in the wicks, but that 'clot' over the heater is thick and ultimately chokes vapor production off, killing the cart.

OF
 

420time

Well-Known Member
looks like you loaded alot in it and burnt the ceramic alot. my kiss cart looks like it has a lot of hashy goop even though its with OG kush from WA dispensary. you can just scrape off the black stuff off the coil and itll look better. i seem to only get one decent hit with a Pinnacle WT even if loaded alot.
 
420time,

FeelingFactory

Well-Known Member
I used .5 BHO, never held down the button longer than 6 seconds :shrug:
These are the loading and usage instructions for the original carts, whereas KISS don't seem to have instructions. Loading more than a dab and not pulsing the button may have led to this, as KISS are load-as-you-go style. The problem likely is the crusted-on hash just needs a hot iso soak (& scrub if you can) to help soften & melt it off. Room temp iso will take forever & won't dissolve it all the way if it got burnt.
 
FeelingFactory,

Zee007

Member
These are the loading and usage instructions for the original carts, whereas KISS don't seem to have instructions. Loading more than a dab and not pulsing the button may have led to this, as KISS are load-as-you-go style. The problem likely is the crusted-on hash just needs a hot iso soak (& scrub if you can) to help soften & melt it off. Room temp iso will take forever & won't dissolve it all the way if it got burnt.

Oh I know that, I meant I used up a total of .5. I only used small dabs at a time.
 
Zee007,

deadheadbill

I can see clearly now the smoke is gone...
So, I know the original cart is not designed to use ejuice, pg etc. But I process all my concentrates into shatter consistency.

Can I add a tiny tiny bit of pg to just loosen it up enough to feed into the cart and vape better or is that still a no no?
 

GR

Well-Known Member
So, I know the original cart is not designed to use ejuice, pg etc. But I process all my concentrates into shatter consistency.

Can I add a tiny tiny bit of pg to just loosen it up enough to feed into the cart and vape better or is that still a no no?
PG and VG do not like to suspend the BHO, it has always separated on me. https://www.icmag.com/ic/showthread.php?t=276058 is some on emulsifying the mix however this works very well and is simple http://www.liquidizer.com/ejmix.html I have been successful mixing 75% BHO shatter to a thick honey and a 50/50 mix will get it liquid enough for ecig tanks and wicks. The thicker may work in the Omicron carts but getting it to thin would probably be a problem with leaks.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Yes- I follow the above instruction. However, the unit requires a cleaning of the inner hole quite often. I guess I was just wondering about a Ti Coiled version?

So all future W9 carts will be LAyG style?

No we will keep our tank design but that's the end of the line for its development for now. Might do something with it later but our concentration is on our Hercules platform atm.


@deadheadbill you can but its not a good idea. If you are going to use vg as a carrier i would suggest a tank system.
 

FeelingFactory

Well-Known Member
So, I know the original cart is not designed to use ejuice, pg etc. But I process all my concentrates into shatter consistency.

Can I add a tiny tiny bit of pg to just loosen it up enough to feed into the cart and vape better or is that still a no no?
As I too use almost exclusively shatter, I've also been considering the idea of thinning it without diluting much to adapt for tank systems. As I understand it, Pure Gold reaches its thin consistency with a small amount of d-limonene. This is found naturally in cannabis as well as orange oil. We have not yet gotten the chance to experiment with it here at the Factory, however.
 

jpdnkstr

Well-Known Member
I have mixed D-limonene with extracts, and prefer them straight also, it swells silicone as Bob stated.
 
jpdnkstr,
  • Like
Reactions: OF

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
What might want to check out is essential oils that are safe for vaporization.

Example oils used in a suana.

This way at least you keep it herbal.
 
Top Bottom