• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued The Persei Vaporizer for herbs and concentrates.

kindbeats

Terps Up, Temps Down
11293065965_c51af871b1_s.jpg
11293135894_b071780cfc_s.jpg
I woke up in Hell this morning!!! fuck!!!:cuss::cuss::cuss::cuss::cuss::cuss::cuss::cuss::cuss:

I've had this happen several times. I often use a dental tool as a dabber. I used it to slowly pull the cap out and it was no problem.
 

masaki

Well-Known Member
THC, any idea when the Clearance sale is supposed to start? Im contemplating placing an order soon, but I want to wait to make sure nothing is going on sale that Im ordering! :)

OF, good idea. I would suggest doing something similiar. The PTFE is pretty soft. I know a needle can go into it easily. Maybe using a reformed fish hook or needle to get it up into the center hole then hook into the material and use a chopstick/bamboo skewer to straighten it out before pulling down? Or if you could somehow manage to cut the O-Ring without it getting lost even deeper in the Nibbler then you could fish out the mouthpiece and the o-ring separately. Hope it works out for you.

Im still lost as to how this happened? Did you unscrew the herc from your persei with the nibble attached? I never do ANYTHING before removing the nibbler. Especially after breaking one and having to replace it.


My nibbler cap on the herc always rips off when I pull it down out the herc and I only remove with gentle wiggling but the threads don't lock in. I find myself re screwing the top cap several times before it becomes fully removed.

My plans after work is to use a paperclip with a hook on it to pull out the o ring then use the body of the herc on my pinky finger and try screw it on and pull it out using my finger as a extension.

Wish me luck.. I'm freaking out at the office just thinking about it
 
masaki,
  • Like
Reactions: zeek01

zeek01

Well-Known Member
My nibbler cap on the herc always rips off when I pull it down out the herc and I only remove with gentle wiggling but the threads don't lock in. I find myself re screwing the top cap several times before it becomes fully removed.

My plans after work is to use a paperclip with a hook on it to pull out the o ring then use the body of the herc on my pinky finger and try screw it on and pull it out using my finger as a extension.

Wish me luck.. I'm freaking out at the office just thinking about it

Just be careful and take your time. Im sure youll get it. As for the top cap pulling off....that must mean your threads are stripped? Youre saying if you pull on it, you can pull the top cap that comes with the nibbler straight off without unscrewing it? Sounds like you need to get a replacement herc insulator tube if thats the case cause it definitely shouldn't be happening like that.
 
zeek01,
  • Like
Reactions: masaki

MileHighLife

Blower of glass, grower of grass
MileHighLife,
  • Like
Reactions: ataxian

SpruceGruve

Bag of sand in hand,Eyeing up the gold statue
I bought that chrome kit from him a little over a week ago ... works fine but it's the old style head. If short protection really worries you this one doesn't have it which is not a big deal if you're not a Murph. He accepted my offer of $70 almost immediately so maybe try offering him $60?
What was you shipping on that?
 
SpruceGruve,

lucky778

Well-Known Member
Just got a Persei. Loaded the 5.0ohm cart with a gram of concentrate. Got about 10 light wispy hits from it over 3 days. Now I get no vapor. The cart gets hot and I can see the red ember glow at the bottom of the cart.


Any ideas?
 
lucky778,

SpruceGruve

Bag of sand in hand,Eyeing up the gold statue
Just got a Persei. Loaded the 5.0ohm cart with a gram of concentrate. Got about 10 light wispy hits from it over 3 days. Now I get no vapor. The cart gets hot and I can see the red ember glow at the bottom of the cart.


Any ideas?
You finished the oil,these large batteries and large ohms really pack a punch
 
SpruceGruve,

Sleepin in CA

Higher than a Pterodactyl, you can call me Caveman
Accessory Maker
Love the hitchhikers reference under the 8's description. My fav.
 
Sleepin in CA,

ataxian

PALE BLUE DOT
Just got a Persei. Loaded the 5.0ohm cart with a gram of concentrate. Got about 10 light wispy hits from it over 3 days. Now I get no vapor. The cart gets hot and I can see the red ember glow at the bottom of the cart.


Any ideas?
There are so many on here more qualified than me however it could be?

AIR POCKET?

Heat your cart with some heat to run the oil down the cart or maybe you over filled?

I load my carts no more than 0.7 gram when I'm down to 0.2 gram I load 0.25 - 0.30 at a time.
 

Caligula

Maximus
There are so many on here more qualified than me however it could be?

AIR POCKET?

Heat your cart with some heat to run the oil down the cart or maybe you over filled?

I load my carts no more than 0.7 gram when I'm down to 0.2 gram I load 0.25 - 0.30 at a time.

Agree.
 

khof

Member
i third the air bubble. Take a bic and heat one side of the cart from the middle up, be careful not to overheat. After you've heated one side for a bit rotate the cart and heat it all the way around not lower than the middle or so. That usually clears it up for me.
@THC SCIENTIFIC
Any chance carts for the SS Ejuice Tank and the quad coil ejuice carts are going to be added to the site? If not is there any old stock lying around I can purchase?


...Damn missed the USPS drop off today and now my order is at the post office. Oh well, I guess tomorrow I'll finally get to try the KISS carts!
 
tiny air bubble in bottom of load of oil not letting it feed

i believe a gram is a bit much too
2.4OHM I sank too once u swim u swim like a fish
5ohm r so fast and powerfull but I love em like the posts all claim it really helps to start with a 2.4ohm and then 1.5 then when absolutely mastered the 5. I really believethe old kits should have came with a 2.4 and a 5 not just two 5ohm carts for someone who just purchased one for their first time but it states don't use without expeiance or something like that I remember but still felt a 2.4 would give a much better success rate for beginners into the great world of persei
 
Last edited:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
You are not doing it right if you think that was vaped. :uhoh:


Yup needs to be dialed in but thats not combustion. Thats been vaped.


Guys SR-74 options up, and sr74 been uploaded for pre orders. There is a sale on it right now.
 
THC SCIENTIFIC,
  • Like
Reactions: exit
Top Bottom