Discontinued The Persei Vaporizer for herbs and concentrates.

Cheerful Dub

Spaced Station
Where do you put the wire in the base when rebuilding the kiss cart? Does one go next to center pin with the other outside the bushing against the outer thread? Did that make sense?
I don't own one but from what I understand they are not rebuildable, unless G wants to correct me on this one. My misinterpretation of the micro bubbler teaser assumed a rebuildable version would be included but apparently it is just a bubbler attachment over the currently available KISS cart base or some combination similar to that. I am kind of on the fence as I love the Herc but don't like taking it out on the road as much, and I was expecting the "new" setup to be rebuildable and TI wire to be available for that purpose, but I think I was just confused from the outset. Which tends to happen a lot these days :rofl:

I was going back and forth with MileHigh about his dripping atomizer setups for this reason, I am more prone to DIY and rebuilding in general, which is why I scooped the SR71 in the first place. I could rebuild a cheap dripper with a ceramic deck with ceramic wick and kanthal if it's going to be like that. I just always avoid disposable things, as they tend to indispose me at the worst possible moments :tinfoil:
 

MileHighLife

Blower of glass, grower of grass
@MileHighLife thanks for the compliments. The two designs work great but for us for many reasons the Herc is ahead because of its no wire technology. The reason is, anyone can rebuild a hercules and down time theoretically is no more then 1 min, and that is because of being lazy. I can replace a rod in 20 seconds and with many other improvements as for taste, and the part that is no oxidation, its never out of comission if you have spare parts, always upgradeable. Just the minor stuff that sets them apart. Plus it can do ejuice as well.


Okeanos is the temp name for the Stainless Version of the Micro Bubbler.

It will come in a 510 thread or a 601, meaning you can hook it up to your vaporizer if it can run it. It will include a Ti Grade 2 coil Kiss cart as well.

There will be a discount for the Okeanos just so you guys know. It is for pre orders only.

I'll be trying out your kiss carts and grabbing a ss kit to shorten it up on the go. Out of curiosity what type of resistance wire do you use on the kiss carts? I found some titanium resistance wire on a UK website but can't find any info on it so I think I may just order it and test it out.

TIA
 
MileHighLife,
  • Like
Reactions: jpdnkstr

kindbeats

Terps Up, Temps Down
Do you remember about a month back when there were some users claiming their coils started to taste bad/metallic? Well, it recently happened to me the other day but there was a reason and a very simple solution that took all of a few seconds. I opened my Herc up only to see that my coil had slid upwards in the chamber. I pushed the coil back down, flush against the bottom. The result? Delicious, ass kicking storm clouds commenced to roll through my drum room. :rockon:

If you are certain that your coil is fully buffered (an empty coil can also give off a metallic taste), check to make sure your coil is all the way down in the upper chamber.

I don't own one but from what I understand they are not rebuildable, unless G wants to correct me on this one.

Nope, one of the main advantages of the K.I.S.S. carts is that unlike other companies' carts, they are indeed rebuildable. :nod:
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I don't own one but from what I understand they are not rebuildable, unless G wants to correct me on this one. My misinterpretation of the micro bubbler teaser assumed a rebuildable version would be included but apparently it is just a bubbler attachment over the currently available KISS cart base or some combination similar to that. I am kind of on the fence as I love the Herc but don't like taking it out on the road as much, and I was expecting the "new" setup to be rebuildable and TI wire to be available for that purpose, but I think I was just confused from the outset. Which tends to happen a lot these days :rofl:

I was going back and forth with MileHigh about his dripping atomizer setups for this reason, I am more prone to DIY and rebuilding in general, which is why I scooped the SR71 in the first place. I could rebuild a cheap dripper with a ceramic deck with ceramic wick and kanthal if it's going to be like that. I just always avoid disposable things, as they tend to indispose me at the worst possible moments :tinfoil:

Hmm you need to give us a little more credit when it comes to making modular designs.

The design itself allows us to offer more then what we are willing to admit to. RDA? we have things in the works that would make RDA's look like wooden swords.

Just relax and support is all we ask.

I'll be trying out your kiss carts and grabbing a ss kit to shorten it up on the go. Out of curiosity what type of resistance wire do you use on the kiss carts? I found some titanium resistance wire on a UK website but can't find any info on it so I think I may just order it and test it out.

TIA

The ones online if im not mistaken at Grade 5's. We use Grade 2's. As for the other stuff There is some info we wont discuss since our research needs to be kept a secrete for now. We know how many companies like to copy our stuff.





@Cheerful Dub and @MileHighLife yes our Kiss carts can be rebuilt, its up to you to figure that out as its only 4 pcs to the puzzle, you need resistance wire and none resistance wire.

 
Last edited:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer

Sleepin in CA

Higher than a Pterodactyl, you can call me Caveman
Accessory Maker
It could but you have to understand we use PTFE for temperature reasons. Plus we have the replacements in production so you can get them in a few week.
Sweet mine is becoming a bit on the mushed side, so I'm glad they are coming. Lol
 
Sleepin in CA,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
... You're right, it is a disgusting price point.


We will be jumping into the desktop world in a short few.


As for whats next is this.

New prototype tops. Button is out a bit for easier operation, has on/off feature so it wont turn on in your pocket, and sum purdy nice electronics inside. Once testing is done we will introduce these tops to everyone.

 
Last edited:

exit

Well-Known Member
I wonder if I can bring my KISS back to life! The PTFE is probably smooshed though
 
exit,

MileHighLife

Blower of glass, grower of grass
we have things in the works that would make RDA's look like wooden swords.
:rofl:I like the sound of that.
We use Grade 2's.
Oh wow very nice!
@Cheerful Dub and @MileHighLife yes our Kiss carts can be rebuilt, its up to you to figure that out as its only 4 pcs to the puzzle, you need resistance wire and none resistance wire.
Alright! I thought the wire would have been soldered in.

Order placed!
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
It's not much more expensive than high-end e-nails, and is much more attractive. :shrug:

Thats cool, but what we have is a lot easier on the wallet and its universal. Remember Leela?

WE made improvements. Alot of improvements.


:rofl:I like the sound of that.

Oh wow very nice!

Alright! I thought the wire would have been soldered in.

Order placed!

Wait wait wait, the Grade 2 is being used on the Okeanos Kiss not the current kiss carts. Dont get that mixed up please.


So I can by a planet for $199 from W9Tech? Count me in. lol

What is it in terms of a vape, is what I meant?

In time My friend in time.
 

exit

Well-Known Member
We will be jumping into the desktop world in a short few.


As for whats next is this.

New prototype tops. Button is out a bit for easier operation, has on/off feature so it wont turn on in your pocket, and sim purdy nice electronics inside. Once testing is done we will introduce these tops to everyone.

whats the chance new tops have a diff color light? ;)
 
exit,
Top Bottom