Discontinued The Persei Vaporizer for herbs and concentrates.

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
you can use the iris with the core but im stuck i dont know why the herc wont work on the hammer top. Can you check all the voltages it cant work at?

Also try to adjust the bottom adapter on the herc when using the hammer top, this could be causing the issues as the short protection in the top my be kicking in.
 
THC SCIENTIFIC,

thevaf

Well-Known Member
Mine is a purple 5 ohm. It glowed on button press for one second. It cooled for about 20 seconds while I loaded it. Then I took a hit and it died during it. It was a brief hit ...like two seconds, so Idk.

Good thing they are rebuildable!
 
thevaf,

kevin

Well-Known Member
you can use the iris with the core but im stuck i dont know why the herc wont work on the hammer top. Can you check all the voltages it cant work at?

Also try to adjust the bottom adapter on the herc when using the hammer top, this could be causing the issues as the short protection in the top my be kicking in.

Thanks G
I'll let you know what I fined out, I've played w/the bottom adapter, nothing, maybe the next cleaning will help?? does it matter that it's a V1 Hammer top, I don't know if there was ever any upgrades? Just know my Hammer top works great for everything but the Herc @7v?? My Herc's are beast they work great!

Kevin

What voltage should I set core for using the Iris top? 7v?
 
kevin,

PhotoRider

Diagnosed with level 11 G.A.S.
G - hey I am at my LHS checking out the Vapped Titan.
It uses Trustfire 18650 batteries (2)
One herb camber much like the original herculus
One TI coil EO cart aka KISS


The voltage is unknown. There are two modes, EO Cart and Herb cart. You set the mode via the LCD and then use. It sets the voltage for operation.
Didn't bring a VM to check...

It isn't a SR-71/74.
 
PhotoRider,

SlideOrDie

Well-Known Member

I loaded the K.I.S.S. cart like 20 times.
The SHORTY with a AW IMR 18350 (just one) is my SHATTER machine!

You will love your SS KIT.

So Fun!
If you like Fun?

I'm with you on this one bud!

I'm just over 2.25g into the OG Chemo x PK Shatter so far today, trying to get through what I had left last night, 6.1g, by midnight :D

SS Kit is amazing, the shorty/KISS combo hasn't left my pocket other than to hit, reload and change AW IMR's :D

@ataxian

How much are you loading at a time? I'm finding .15 to be about perfect so far for a couple nice big rips.
 

zeek01

Well-Known Member
G - hey I am at my LHS checking out the Vapped Titan.
It uses Trustfire 18650 batteries (2)
One herb camber much like the original herculus
One TI coil EO cart aka KISS


The voltage is unknown. There are two modes, EO Cart and Herb cart. You set the mode via the LCD and then use. It sets the voltage for operation.
Didn't bring a VM to check...

It isn't a SR-71/74.

Here is their website if anyone wants to take a look. $249.99 for a Titan seems a bit high dont yall think?!

http://www.ruvaped.com/
 
zeek01,

ataxian

PALE BLUE DOT
I'm with you on this one bud!

I'm just over 2.25g into the OG Chemo x PK Shatter so far today, trying to get through what I had left last night, 6.1g, by midnight :D

SS Kit is amazing, the shorty/KISS combo hasn't left my pocket other than to hit, reload and change AW IMR's :D

@ataxian

How much are you loading at a time? I'm finding .15 to be about perfect so far for a couple nice big rips.
I played around with all my gear and the very best combination was the SHORTY/K.I.S.S. combination.
The OMICRON was pretty good too.
The SHORTY just looks so cool!

I need some more SHATTER!
.125 grams is all I have.
How long does this thing last?
It just works and works?
And "G" is making it better?
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
G - hey I am at my LHS checking out the Vapped Titan.
It uses Trustfire 18650 batteries (2)
One herb camber much like the original herculus
One TI coil EO cart aka KISS


The voltage is unknown. There are two modes, EO Cart and Herb cart. You set the mode via the LCD and then use. It sets the voltage for operation.
Didn't bring a VM to check...

It isn't a SR-71/74.

ya at 6v the 3 amp limits are ok i guess on the 18350's. But that still taxing them big.
 
THC SCIENTIFIC,
  • Like
Reactions: ataxian

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
ordering my persei friday! along with the core and hammer/bender so stoked!

Excellent choice.

While we are going to shelve the Ceramic Bowl idea because really not portable more of a desk top unit, we do have something else thats in the works. Current discoveries and enlightenment we had may have given a ceramic bowl for oils possible for the Persei. Basically a Kiss Cart on Steroids.

You might think a Gr2 Ti coil is cool. Stay tuned.

Birth of the Sr Series is now looking like a possibility.
 

ataxian

PALE BLUE DOT
@ataxian how many sessions are you getting with the shorty/KISS combo between recharges?
Not keeping track as well as I normally do.
My focus is making SHATTER for my gear.
I used the K.I.S.S. cart on the OMICRON first about 1 gram.
Then I put it on a PERSEI SS Long Tube 18650 about 0.5 gram
What I ended up with is the PERSEI SS SHORTY Tube 18350 about 1 gram so far.
2.5 grams of Triple Purged SHATTER so far.
No signs of slowing down.
Making more SHATTER for this baby tomorrow.
HERCULES SR71 test this week as well.
I use the K.I.S.S. cart as a DABBER however I get a lot of rips between loads.
The Batteries I have been using are the AW IMR's.

It has been about 2 weeks since I started using the K.I.S.S. cart.
The HERCULES SR71 is a different attachment.

The K.I.S.S. cart is medicating!
The HERCULES SR71 is SEDATING!

Both have there purpose!

Choose your weapon?
 

Caligula

Maximus
@ataxian That reminds me. I've been experimenting with different shatters mixed with herbs in the Solo @ low temps (3-4) for flavor experimentation. I know you are a flavor chaser, and humbly suggest this as a potential experiment for yourself. Id like to hear your opinions on the matter.

Obviously no where near as hassle free or as fast/direct as the Hercules or KISS, but interesting none the less for the experience of it all.

Sorry. Not to get too far sidetracked. I know this isn't the Solo thread.
 
Caligula,

keifmaker

Pax Ploom - Zmax mini- Thermo W
@THC SCIENTIFIC awesome man im really excited. i have a jar full of dab already waiting for the k.i.s.s. cart ill also be ordering. eventually i want to get the nibbler with the herc but for now the k.i.s.s. and bender hammer combo will have to do.
 
keifmaker,
  • Like
Reactions: ataxian

air_zonk

Member
guys what do i do if the hercules without a shell and bottom insulator reads 1.7 but doesnt fire on directly connected to the top
 
Last edited:
air_zonk,

Caligula

Maximus
q6d6.jpg
Jack Herer shatter ready for takeoff!
 
Caligula,

Caligula

Maximus
HI GUYS.......
I am having a problem with my Persei SR 71 bottom cap.....
well maybe more than 1 part of it,

i can take a multimeter and measure Persei sr 71 without the bottom cap and it read 1.7 ohms

but if i put it on it shows a short all the time!
i took off the bottom cap and looked at it

i don't think this looks right? does this look wrong? i feel like the center pin is a lot farther up than it should be and is not making contact with bottom cap?

3bXvYrx.jpg
Adjust the screws in the bottom insulator cap.
 
Caligula,

air_zonk

Member
ya but the center pin in the hercules itself look like it too far up
isnt that supposed to be flush with the bottom not way higher than it....
 
air_zonk,
  • Like
Reactions: Caligula

StickyShisha2

Well-Known Member
i don't think this looks right? does this look wrong? i feel like the center pin is a lot farther up than it should be and is not making contact with bottom cap?

3bXvYrx.jpg
that doesn't look right to me. mine is all the way out flush with the end.

Perhaps clean and rebuild the center pin assembly making sure to get the tiny insulator sleeves in place snug
 
StickyShisha2,
  • Like
Reactions: Caligula

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC,
Hey G, did that link to the pic of my broken bottom connector work for u? I still haven't heard back from ya.

Call tomorrow so we can get you a bottom adapter.
ya but the center pin in the hercules itself look like it too far up
isnt that supposed to be flush with the bottom not way higher than it....


That center pin is to far up. Possible to see images from both sides minus the Hercules main body?
 
Top Bottom