• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Arizer Solo

wolfmother said:
This is an inspirational post. I love this site. Good luck to you man, i dig your case, awesome job.
Guys, just hold my hand a little. My solo will arrive in the morning, stock out the box.

Just run me through it, step by step. How do I get buckled/monged

Secondly, where is the best place to buy accessories online in the UK and what are the must have bits/spares?
 
wolfmother,

The High Cyde

Well-Known Member
Got a short story for you guys.

So the other day I was at a friend's place, and we were just chillin, and he had two blunts ready to go. So he lit one, we finished it; lit the other, finished it....and I am proud to admit that one bowl of the same strain in my Solo with the PNWT gets me WAY higher and for longer, it's crazy! I know for a fact because before I headed over I had a solo session by my self in my car lol I was parked in the school parking lot, hotboxing my car with the WT, and I was up there pretty high. After our sess I realized that one bowl got me in a better place faster than two blunts in a row.

And a few days before that I had three blunts in a row with him and a few friends, and I'd STILL say the same thing.

It's honestly unvelievable, but there it is.
 

honorface

vape weed; eat yogurt
Just got my solo today after purchasing it from @llamaman001. This thing is awesome, so sleek looking and a great weight in hand. I like that the stem itself keeps all the weedy smell rather than the unit. The settings so far seem incredibly straight forward and easy. My first session I drew 4/5 times at 4 and then 4/5 times on five. I still had some green left though. I was told I should blast the last few draws with a 7 though. The draw is straight smooth if you make it so. When I first started vaping off it the draws where uneven and awkward but now I am getting the hang of it.
 

Gray Area

Well-Known Member
Secondly, where is the best place to buy accessories online in the UK and what are the must have bits/spares?

Try
Vapefiend.co.uk

Authorised dealers, great fast service with free postage for orders over £12 and he usually stocks the PVHE stems and GonG's too.
 
Gray Area,

shadyonedeath

Well-Known Member
Hey guys. First post so far though I've been lurking here for about a year since I got my solo. Never had a reason to ask a question since I found all the answers here anyway, never considered myself to have the expertise to answer any either so this post will mainly be to say thanks a lot to all of you who posted here, questions and answers alike, all helped a lot. :)

And to introduce myself a bit:

First cannabis forum I join and I must say this one's awesome! I'm actually 46 years of age (from Sweden) and only started vaping about a year and a half ago. Before that I only smoked the occasional joint but now I hit it a few times a week since it's so good and addictive (in a good way...), also got my own growroom going since a year back. Fascinating stuff, growing, trying out new strains every time and changing the methods once in a while...

This thread's been most inspiring but also cost me quite a bit since, all the time, I see new stuff and ideas to try out.

For the solo alone I so far got me two pvhes-stems, two pvhes-GonGs, two of Eds wooden stems, one jet-flash, one Pinnacle watertool, one power adapter, one charging stand, some o-rings and smaller stuff + a big bubbler. Just ordered some glass screens and the "high capacity pack" battery as well. I still feel I need to get the Aio+ and the stand that comes with it though, it just never ends.... lol. That's just part of the fun with it though, love the Solo and all the things you can do with it.

Also have a "da kube" (first vaporizer I got, piece of crap), a "palm 2.0", an "Extreme Q" and some crap, generic, box vape and still the Solo is almost the only one I use, whether at home or away.

Just made myself a case for the Solo and whatever I might need if I'm out traveling, might not be a good idea bringing it when I go to other countries though.. ;) Still got some room for more stems or stuff, which I'm sure will come in handy as new stuff for this thing seems to arise continuously.

jn90ec9.jpg



Well, that's a bit about me. Freshly registered, looking forward to maybe taking a more active part in the community now, though it's been very interesting just reading your questions, answers, comments and ideas as well.
Time for a stem, think I'll go with the wooden one, the jet-flash on top and low temp this time, still early evening here... Have a nice one. ;)

Are you 007?

How did you cuz the foam so neat?
 
shadyonedeath,
  • Like
Reactions: Krydolf

Lusi

Well-Known Member
Here you go
http://skunkpharmresearch.com/bho-extraction/

Shatter is made with iso and butane processes .
If purged properly , it's safe from toxicity .
The vacuum purger ataxian has is a good method .

Thanks for the link! A vacuum set up like this is gotta be pricey. Maybe I can sell my brand new never opened 1000w hps with hood and ballest kit. Don't need it! :)

Are you sure bho has to be decarbed? I thought solvents and heat both deca rbed mj... My original bho set up csme from Rivk Simpsons Run from the Cure... specifically to eat!

Where did you get this? What's it called? Is that the stock mouthpiece? I want one! :)

Luv Pellegrino too! :) An occasional treat...

Got a short story for you guys.

So the other day I was at a friend's place, and we were just chillin, and he had two blunts ready to go. So he lit one, we finished it; lit the other, finished it....and I am proud to admit that one bowl of the same strain in my Solo with the PNWT gets me WAY higher and for longer, it's crazy! I know for a fact because before I headed over I had a solo session by my self in my car lol I was parked in the school parking lot, hotboxing my car with the WT, and I was up there pretty high. After our sess I realized that one bowl got me in a better place faster than two blunts in a row.

And a few days before that I had three blunts in a row with him and a few friends, and I'd STILL say the same thing.

It's honestly unvelievable, but there it is.

As someone who's never had a blunt and always wondered how much buds is used to get the same effect. This is actually helpful info! :))

Can you explain why I always hear from smokers who also vape that the flavors of the mj only come out in a joint? This thread is the only place I've read about the flavors of vaporizing! My solo is on the way. I sure hope I taste this too!
 
Lusi,

cawshook

Solod out.
would a bubbler offer the same experience as the water tube? Its much cheaper to get the bubbler. I really want to get the Pax for ultra portability. I was originally thinking pinnacle pro, and i still might get it if theres a nice black friday offer for the PNP and the water tube, but otherwise im just going with the pax and a bubbler. I really like the 10 yr warranty for the pax. Thoughts?
 
cawshook,

olivianewtonjohn

Well-Known Member
would a bubbler offer the same experience as the water tube? Its much cheaper to get the bubbler. I really want to get the Pax for ultra portability. I was originally thinking pinnacle pro, and i still might get it if theres a nice black friday offer for the PNP and the water tube, but otherwise im just going with the pax and a bubbler. I really like the 10 yr warranty for the pax. Thoughts?
Thoughts?

Solo>>PNP>>>>>>>>Pax
 

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
Recieved my PWT a couple of weeks ago. This has been a huge improvement. I have a gong, but prefer to use this setup:

solo&pinnacle.jpg


It is just a stock stem with a piece of tubing for the connection to the pinnacle.
The red color is just fruit juice, adds a nice fruitty flavor. This setup works so smooth. Should mention that there is also a screen in the heating chamber for better draw. The restricted draw is all gone.
I like this configuration so well, I am going to order another straight stock stem so that the proper 14mm connection can be added by my local glass blower to give a perfect connection. The long tube adds extra cooling and when sitting on the couch all I do is tip the rig to take a hit,no need to lift.
When filling, I fill to within 1/4" from the top of the inner glass "dome". I find any higher and that siphon effect will happen and the tube will drain. I like the upper spash guard "dome" also as water in the mouth is usually not a problem.
It is remarkable how little water is actually used in this little tool. Pour it in to a drinking glass and you will have only a quarter inch or so of water in the bottom of the glass. I did have a few drops go into the heating chamber once or twice, but it was mostly absorbed by the weed in the stem though. Most of the time it works perfectly.
Anyone wanting to improve their Solo experience should definately get one of these as soon as possible. A vast improvement for anyone using this device for medical marijuana.
 
Last edited:
Dr. Soxhlet,
  • Like
Reactions: ataxian

olivianewtonjohn

Well-Known Member
Recieved my PNWT a coup;e of weeks ago. This has been a huge improvement. I have a gong, but prefer to use this setup:

solo&pinnacle.jpg


It is just a stock stem with a piece of tubing for the connection to the pinnacle.
The red color is just fruit juice, adds a nice fruitty flavor. This setup works so smooth. Should mention that there is also a screen in the heating chamber for better draw. The restricted draw is all gone.
I like this configuration so well, I am going to order another straight stock stem so that the proper 14mm connction is added to give a perfect connection. The long tube adds extra cooling and when sitting on the couch all I do is tip the rig to take a hit,no need to lift.
When filling, I fill to within 1/4" from the top of the inner glass "dome". I find any higher and that siphon effect will happen and the tube will drain. I like the upper spash guard "dome" also as water in the mouth is usually not a problem.
It is remarkable how little water is actually used in this little tool. Pour it in to a drinking glass and you will have only a quarter inch or so of water in the bottom of the glass. I did have a few drops go into the heating chamber once or twice, but it was mostly absorbed by the weed in the stem though. Most of the time it works perfectly.
Anyone wanting to improve their Solo experience should definately get one of these as soon as possible. A vast improvement for anyone using this device for medical marijuana.


Man that thing looks pretty nice with the fruit juice. Its funny how our experiences differ, I cant wait for my adapter hate using the stem
 
olivianewtonjohn,

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
Man that thing looks pretty nice with the fruit juice. Its funny how our experiences differ, I cant wait for my adapter hate using the stem
Yes and since there is no combustion that liquid does not taste that bad and is sure to be full of cannabinoids, I just drink it. Really cool how many ways there are to use this substance. All my vaped weed is refluxed in ethanol to make oil, so even that is reused.
 
Dr. Soxhlet,

cawshook

Solod out.
Thoughts?

Solo>>PNP>>>>>>>>Pax
You tried all 3? So I should go with the PnP in ur opinion? Can you please PM me a quick reply so we dont derail the thread from its topic.

Would a bubbler give you the same experience as the water tube? Thats my main question here.
 
cawshook,

Pipes

Addicted DIY Enthusiast
Accessory Maker
Recieved my PNWT a coup;e of weeks ago. This has been a huge improvement. I have a gong, but prefer to use this setup:

solo&pinnacle.jpg


It is just a stock stem with a piece of tubing for the connection to the pinnacle.
The red color is just fruit juice, adds a nice fruitty flavor. This setup works so smooth. Should mention that there is also a screen in the heating chamber for better draw. The restricted draw is all gone.
I like this configuration so well, I am going to order another straight stock stem so that the proper 14mm connection can be added by my local glass blower to give a perfect connection. The long tube adds extra cooling and when sitting on the couch all I do is tip the rig to take a hit,no need to lift.
When filling, I fill to within 1/4" from the top of the inner glass "dome". I find any higher and that siphon effect will happen and the tube will drain. I like the upper spash guard "dome" also as water in the mouth is usually not a problem.
It is remarkable how little water is actually used in this little tool. Pour it in to a drinking glass and you will have only a quarter inch or so of water in the bottom of the glass. I did have a few drops go into the heating chamber once or twice, but it was mostly absorbed by the weed in the stem though. Most of the time it works perfectly.
Anyone wanting to improve their Solo experience should definately get one of these as soon as possible. A vast improvement for anyone using this device for medical marijuana.
I would be very careful there. It would only take a small side bump and the end of the stem will break in the Solo. :doh:
 

Tom Funk

Well-Known Member
Can you explain why I always hear from smokers who also vape that the flavors of the mj only come out in a joint? This thread is the only place I've read about the flavors of vaporizing! My solo is on the way. I sure hope I taste this too!

Perhaps they just mean the flavours as they think they should be, based on being smokers first, and perhaps because strain reports usually have a taste description that is based on smoke rather than vapor.

Each strain does have its own unique flavor when vaped, as long as it's cured well. To me the flavor is pretty much the same as the smell of the buds.

TF
 

cawshook

Solod out.
Out of the box, there's a decent amount of restriction. Whole nugs would just increase that. I use a medium fine grind.
ya medium fine grind is how i go as well. I recommend a space case grinder. Or something with a similar grind. I like the Space case because the grind is so even = even vaporization.

PS: bubba kush produces so much vapor!
 
cawshook,
  • Like
Reactions: Krydolf

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
I would be very careful there. It would only take a small side bump and the end of the stem will break in the Solo. :doh:
Definately the kind of thing to be used on the couch. It does wobble a bit at the heater end. Several months ago I did break off a stock stem, but that was just clumsyness. The thing does produce tasty clouds that seem to go on and on.
 

ataxian

PALE BLUE DOT
Thanks for the link! A vacuum set up like this is gotta be pricey. Maybe I can sell my brand new never opened 1000w hps with hood and ballest kit. Don't need it! :)

Are you sure bho has to be decarbed? I thought solvents and heat both deca rbed mj... My original bho set up csme from Rivk Simpsons Run from the Cure... specifically to eat!


Where did you get this? What's it called? Is that the stock mouthpiece? I want one! :)

Luv Pellegrino too! :) An occasional treat...



As someone who's never had a blunt and always wondered how much buds is used to get the same effect. This is actually helpful info! :))

Can you explain why I always hear from smokers who also vape that the flavors of the mj only come out in a joint? This thread is the only place I've read about the flavors of vaporizing! My solo is on the way. I sure hope I taste this too!
The tip on one of my stems is a OMICRON Silicone Tip that comes with the Cartridges for my wax pens.
Since I make my own concentrates I have devices for them. So I find cross over gizmos.
I'm a medical marijuana patient so I like a smaller mouth piece. Go into a SMOKE SHOP in CALIFORNIA and most of the WATER PIPES have large mouth pieces like a BONG? I have to find ways to reduce the mouth piece for my liking. I may have to learn how to blow glass to get the mouth piece size I want. Most glass blowers make water pipes for the recreational user which is cool however what about the medical patient?

Here are some of my hacker mouth piece reductions:










I disagree with JOINT smokers.

FAST FOOD verses HOLISTIC!

My vacuum set-up cost $200 to make!
Home Cheapo and the Internet for parts.
 
Last edited:

Krydolf

Member
Welcome!

How did you manage to get such perfect cuts on your case containment?
CNC?
Sharp Knife?
Your turn to contribute!

Kind regards,
ataxian

Not very hard at all, if only you're careful and plan ahead before you start cutting of course.

The "foam" is actually already kind of pre-cut both vertically and horizontally as you can see from this pic. It's like little cubes that are about half an inch in diameter, still connected to each other, and you just get down there and cut them off at the depth you need. I used the knife shown here but I'm sure you could just use a pair of scissors as well, the foam is quite soft. Here's a link to the one I got (that one's in the UK though): Aluminium Case.

759Riuy.jpg


Now off to re-pot my three little Chocolopes, been two weeks since I put the seeds in the dirt and the roots are already getting to big. The two small NL autos will have to wait for another couple of weeks, planted those later since they will probably finish faster... And thanks to all for the warm welcome.! :)

3qZ5seR.jpg
 
Top Bottom