Discontinued Supreme Vaporizer
- Thread starter nysuperscum
- Start date
-
- Tags
- flame powered
minnesnowta
Vaporist/Glass Head
not my supreme I borrowed no smokes. Got some new glass and I needed more than my pd before my new heatwand comes. Vg circ bub
http://www.youtube.com/watch?v=LJkIH-3CWZ4
http://www.youtube.com/watch?v=LJkIH-3CWZ4
AGBeer
Lost in Thought
I get that too sometimes. I think it has something to do with the battery making contact where it shouldnt on occasion. If you remove the display, you will see that every time you tap your SV to unload it, the battery can move out of its conductive housing. This is usually when I see my SV going on the fritz a little bit.Chubba said:I dunno... it seems to work fine now.
Does 400+ = instant error?
The display was full of trippy shit, weird symbols
If I had a design change - this would be it
IAmKrazy2
Darth Vapor
I am joining the club.... I mean why not?
Ordered from Ed and negotiated a little by taking out the torch and whip. Am I correct in assuming i could use any plastic vape tubing to connect a whip to the mouth piece if i wanted?
I ordered 2 torches from China like SM. Probally will have to wait a bit. Anyone know if Ronson Multi Fill Ultra Butane Fuel will work? Its the standard stuff white and red can. I dont see triple refined on it anywhere though like mentioned earlier in the thread. I'll likely go to a cigar shop and get one more cheap torch backup and some proper butane though anyways. Thanks.
Ordered from Ed and negotiated a little by taking out the torch and whip. Am I correct in assuming i could use any plastic vape tubing to connect a whip to the mouth piece if i wanted?
I ordered 2 torches from China like SM. Probally will have to wait a bit. Anyone know if Ronson Multi Fill Ultra Butane Fuel will work? Its the standard stuff white and red can. I dont see triple refined on it anywhere though like mentioned earlier in the thread. I'll likely go to a cigar shop and get one more cheap torch backup and some proper butane though anyways. Thanks.
Chubba
Vaporbonger
Damn, my display so far has worked 100% perfect.
My biggest gripe, which may not even be a gripe but more a worry... my bud tends to clump up and "stick" inside the bowl after I've finished and was requiring a pretty substantial beating to get it to come out.
So now I just unfold a paper clip, stick it in and swirl it around to loosen it up and then 1 little tap and it's out, done this for about 100 bowls with no problems but apparently the temp sensor is inside the bowl
quomist
Rock the Casbah
I get it stuck inside as well but only when I let the unit cool off first. I just put it upside down in a metal mason jar lid and smack it down on a desk or padded surface. One smack when it's still hot, three smacks if it's cooled down and stuck.Chubba said:Damn, my display so far has worked 100% perfect.
My biggest gripe, which may not even be a gripe but more a worry... my bud tends to clump up and "stick" inside the bowl after I've finished and was requiring a pretty substantial beating to get it to come out.
So now I just unfold a paper clip, stick it in and swirl it around to loosen it up and then 1 little tap and it's out, done this for about 100 bowls with no problems but apparently the temp sensor is inside the bowl
reece
Well-Known Member
Have you checked the battery? It sometimes slips out a little. Be careful with the wires though. Very delicate. I've gone through more than a few of those displays. I recommend buying a couple extra to have on hand if a wire breaks when changing the battery. Otherwise you have to kind of time it and judge by smell while waiting for another temp display to be shipped. They were $15 the last time I bought one (a long while ago).AGBeer said:
I remember when I first got this vape. I made a review on some site, I forget what it was called, and was attacked as being a shill by some guy who said the SV burned the herb.
no moving part ?
the metal block moves a tiny little bit when I shake the SV, does anybody has that to ?
As for my xp, it fits perfetcly on the bong that i had, i just plug it in the femal part where i use to load the weed when i was combusting.
Using it for almost two months, some times I don't touch my cano for 2-3 days and the SV has amazed a lot of people, even some almighty unbelievapers !!
the metal block moves a tiny little bit when I shake the SV, does anybody has that to ?
As for my xp, it fits perfetcly on the bong that i had, i just plug it in the femal part where i use to load the weed when i was combusting.
Using it for almost two months, some times I don't touch my cano for 2-3 days and the SV has amazed a lot of people, even some almighty unbelievapers !!
Chubba
Vaporbonger
No luck here
Mine was taking 10+ hits even while still blazing hot 300F+, 10 seconds after my last hit.
When it was cold, forget about it, sometimes 30-40 hits then I would get angry and get a skinny screwdriver and shove it up there.
Mine has a few mm wiggle room now in every direction... up/down, side/side and even rotate.
Still feels firmly attached and doesn't seem to be getting looser at all.
Yeah mine rattles, not sure it's the HE though, sounds like something INSIDE.
quomist
Rock the Casbah
How do you pack your bowls? I normally just take a small spoonfull of grinded herbs, drop it in the hole and smack the sides of the SV with my hands till it's all in the bowl. Sometimes I scrape it the inside of the wood with the back of my mini spoon if some doesn't fall in. Then I just throw the screen on and heat it up.Chubba said:No luck here
Mine was taking 10+ hits even while still blazing hot 300F+, 10 seconds after my last hit.
When it was cold, forget about it, sometimes 30-40 hits then I would get angry and get a skinny screwdriver and shove it up there.
Chubba
Vaporbonger
I'm the same.
Mines VERY fine, verging on powder, same consistency as I do for my Purple Days.
Simply drop it in, 1/3rd - 1/2 bowl, shake it side to side and like you I scrape the remaining around the edge (except I use my fingernail) into the bowl.
Screen in, flip over, hit it back to back (never let it go below 300F) till the bowls finished and then it's cemented in place
If I stick the paperclip in and loosen it up, it simply "falls" out, doesn't even need a tap, I'm just worried in the long run I'll end up damaging the thermo inside the bowl.
so I guess it s normal to have sme small moving he.
and what about your block guys ? mine get slightly coloured on the top (like rust Id say) .
maybe because i live it out of the sock or because I some time blow into the metal part to clear the tube... i don t know but I hope it doesn t get inside.
Btw did dome one already opened the block and reassembled it ? it looks doable.
and what about your block guys ? mine get slightly coloured on the top (like rust Id say) .
maybe because i live it out of the sock or because I some time blow into the metal part to clear the tube... i don t know but I hope it doesn t get inside.
Btw did dome one already opened the block and reassembled it ? it looks doable.
reece
Well-Known Member
To pack, I used to use the triangle scraper (then a guitar pick when I lost the scraper) that comes with Space Cases to scoop up a little herb and load into the SV. Then I use a small brush to brush any material from the side into the bowl. Pop the screen in and start heating.
I have no recollection of the heat exchanger moving. But it has been a while.
My block would get some discoloration on the side where I apply the flame. I used a sponge with an abrasive side and it comes right off.
I have no recollection of the heat exchanger moving. But it has been a while.
My block would get some discoloration on the side where I apply the flame. I used a sponge with an abrasive side and it comes right off.