Discontinued The Persei Vaporizer for herbs and concentrates.

tsc.v8

tsc.v8

Active Member
Bob Loblaw said:
it's not personal, at all
Click to expand...
Okay, sorry if I flew off the handle. I found the instructions alright when I went back and looked again, but I can see why I missed it. It's kind of embedded in a message about something else, with no explanation (no offense, G)! Anyway, I'm going to read it now, keeping in mind that it's not the final version. Thanks!
 
Bob Loblaw

Bob Loblaw

Astralnaut
OF said:
So a minute later I get corrected by Bob. Again.

Will someone please get the chain back on him and take his keyboard away?

Thanks, guys, with teamwork we can do this......

OF
Click to expand...

just remind me to test my herc again, it'll be nappy time soon enough ;)

tsc.v8 said:
Okay, sorry if I flew off the handle. I found the instructions alright when I went back and looked again, but I can see why I missed it. It's kind of embedded in a message about something else, with no explanation (no offense, G)! Anyway, I'm going to read it now, keeping in mind that it's not the final version. Thanks!
Click to expand...

no sweat, don't mind a quick draw, just be a careful shooter ;)
i do get mistaken for rude when i'm being short.
the "dude," was supposed to make it softer. not the best social skills at times
glad you got the info
 
Tommii

Tommii

Subdivision Founder / Sublimator Ambassador
My gosh this thing is easy to use. I smoked out a whole cartridge with all my friends at a local place with my sublimator.

Woke up completely baked (15 mins ago)

Only problem I have is the airflow which gets clogged (could be because I have the extracts up right under the bar with the hole.)
I try to puff on it hard until it breaks

Prepping is a pain in the ass but worth it once you get the biggest smokes.


Been rocking out the 2.4ohm/3.7volts setup. Works beautiful.

Thanks!
 
Bob Loblaw

Bob Loblaw

Astralnaut
Tommii said:
My gosh this thing is easy to use. I smoked out a whole cartridge with all my friends at a local place with my sublimator.

Woke up completely baked (15 mins ago)

Only problem I have is the airflow which gets clogged (could be because I have the extracts up right under the bar with the hole.)
I try to puff on it hard until it breaks

Prepping is a pain in the ass but worth it once you get the biggest smokes.


Been rocking out the 2.4ohm/3.7volts setup. Works beautiful.

Thanks!
Click to expand...
wait'll you get ahold of the blackbird ;)

EDiT - (and no there is no new product called the "blackbird". SR-71 is the code for the military plane, the blackbird)
 
Last edited:
SlinginPaint

SlinginPaint

As Above ∞ So Below
Flew in to Ft Lauderdale this evening with the Persei and a CE4 tank filled with nic-juice while I shipped myself somegoodies to the apt here. Hoppin on a cruise tomorrow for 7 days with a 2.4 and can't wait to be relaxing with my trusty friend and my lovely fiance.

Ill snag a couple shots of the rampage in action. They won't compare to Ataxians Bender travels but ill give it a try haha
 
ataxian

ataxian

PALE BLUE DOT
THC SCIENTIFIC said:
How goes the Sr-71 with the washer under the mouth piece?
Click to expand...
I was suppose to be medicating.
However I got so stoned I went into a self Induced Coma.

Very Efficient!

I will do some TAFFY tonight with it.
The MESH should be a blessing with this medicine.

The air flow is set real nice with the washer in the mouth piece to control air flow!

SATURDAY TRIALS

Started off with RED however Blinking Blue light?
So I took the HERCULES apart and reset the HAMMER ROD.
Took 5 Lung expanding rips of TAFFY then DRAINED a 5.0 Cart of SHATTER on top of the MESH.
So here I am with a SR71 loaded with TAFFY and SHATTER.
Now with the HERCULES SR71 firing I then set up the BLACK UNIT and took 10 Bob L. type rips.

Had to stopped as my medication levels were complete!

Now this TAFFY is full of Flavor and Effect however sticky and will make clogs if loaded in a cart.
What I like about the HERCULES SR71 is it doesn't care.
This guy is a POWERFUL MOTHER F^c$er!

I was going to stay up and watch a movie.
Well good night!
 
Last edited:
ataxian,
  • Like
Reactions: tsc.v8
C

cannaman559

Well-Known Member
MaxVapor said:
I like to do 2.4 carts at 4.2 to 5.0 volts on the Iris. I have brought back some carts I thought were done using the higher voltage. Gotta be light on the button specially at 5v as the extra heat can burn the oil or make the cart leak if it gets too hot. But for carts that already leaked and you just want to wring out what you can the higher voltages you can do with the Iris can help.

Also I find that 2 AW 18350 bats last FOREVER running at 4.2 volts in the Iris.

Now I just want the v2 and the Core (which will be like an Iris plugged into the wall).
Click to expand...

Anyone know where I can buy an iris?
 
tharealmclovin

tharealmclovin

Well-Known Member
The V1 was a limited run. They are working on the V2. It is not available until then. unfortunately i have a non working V1, but cant warranty it because of lack of product on hand.

ANyone know if i can fully ISO soak the Iris? The problem is that oil leaked into the buttons and now they are stuck
 
tharealmclovin,
  • Like
Reactions: ataxian
tsc.v8

tsc.v8

Active Member
I can almost hear a haunting wind, slowly blowing through the deserted town of Persei, maybe powering a tumbleweed or two.

Hey, I'm on message 99! Cool.
 
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
W9tech.com going up tomorrow guys at half capacity, at same time we start shipping out hercules orders tomrorow, and replacements by monday i think, since we are waiting for engravings to be done.
 
kindbeats

kindbeats

Terps Up, Temps Down
THC SCIENTIFIC said:
W9tech.com going up tomorrow guys at half capacity, at same time we start shipping out hercules orders tomrorow, and replacements by monday i think, since we are waiting for engravings to be done.
Click to expand...

Are you saying that Hercs are shipping out tomorrow to those who ordered new ones but the people receiving replacement Hercs are going to have to wait until Monday the 12th for them to be shipped out? I hope not, because I sent both my Hercs in a week ago and that would mean I'll be without my vape for yet another week. The original plan was that we wouldn't have to be without our Hercs at all, but now two weeks? That sucks. Especially if it's because of engravings. Please say this isn't the case. :uhoh:
 
tsc.v8

tsc.v8

Active Member
:razz: Get ur freak on, Bob! (Not that I know anything about that clip). ;)

And yes, the anticipation is killing me, thanks for the reminder, lol.

edit: This is supposed to be a joke. I hope no one was offended.
 
Last edited:
friedbanana8

friedbanana8

Well-Known Member
which cart next to the 2.4ohm'er would you guys say handles the dirtier concentrates best?
i got about a gram of reclaim today with that iso/evap method and was thinking about throwing some in a cart.
 
friedbanana8,
  • Like
Reactions: tsc.v8
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
kindbeats said:
Are you saying that Hercs are shipping out tomorrow to those who ordered new ones but the people receiving replacement Hercs are going to have to wait until Monday the 12th for them to be shipped out? I hope not, because I sent both my Hercs in a week ago and that would mean I'll be without my vape for yet another week. The original plan was that we wouldn't have to be without our Hercs at all, but now two weeks? That sucks. Especially if it's because of engravings. Please say this isn't the case. :uhoh:
Click to expand...

I am sorry but we need more man power then we currently have to take care of the exchange program. This will get done as soon as possible. Things happen and they do change, please stay with us as we make things right and get people going. Its hard getting things out the door but once you get the Hercules and fire her up you will know why its worth it.
 
BLAZING OG

BLAZING OG

Vaping is a way of life!
THC SCIENTIFIC said:
I am sorry but we need more man power then we currently have to take care of the exchange program. This will get done as soon as possible. Things happen and they do change, please stay with us as we make things right and get people going. Its hard getting things out the door but once you get the Hercules and fire her up you will know why its worth it.
Click to expand...
What kinda help you looking for???
So websiteup tomorrow, SR-71 ships out tomorrow (for purchased SR-71), and the replacement SR-71 for the ones who sent in the original herc is next monday aug 12th???? did I get this correct???
Thanks G!
:rockon:

kindbeats said:
Are you saying that Hercs are shipping out tomorrow to those who ordered new ones but the people receiving replacement Hercs are going to have to wait until Monday the 12th for them to be shipped out? I hope not, because I sent both my Hercs in a week ago and that would mean I'll be without my vape for yet another week. The original plan was that we wouldn't have to be without our Hercs at all, but now two weeks? That sucks. Especially if it's because of engravings. Please say this isn't the case. :uhoh:
Click to expand...
My apologies you beat me to it????
:tup:
 
TommydCat

TommydCat

Well-Known Member
antici.........................................

Loved that movie back when it was only in the theater! :)

Just checking in on vacation.. Persei is holding up quite well, and made quite the impression with some hacker vapeheads out here in the desert!
 
You must log in or register to reply here.
Top Bottom