E-Nano from Epickai

Rrose Selavy

Rrose Selavy

log enthusiast
haha Dafni to each their own. i figured you meant that you cut the glass but was not sure how you would do that. seem like a good idea if you have experience cutting glass.

am i the only one who feels like using the silicone lowers vapor production? i tried using silicon to better secure the wand to the heater when hitting dry, seemed to function better with out it. nbd just my :2c:
 
Rrose Selavy,
ataxian

ataxian

PALE BLUE DOT
Dafni said:
For the Nano and similar vapes I make my own gongs and adapters. As for the Nano, I just cut the gongs apart and reconnect them with a short lenght of silicone tubing. Or put a gong in a likewise fashion into a suitable glass joint that I have lying around.
Always aiming for non restrictive adapters/screens/gong setups.
Click to expand...

I use the OMNICRON tips.
 
ataxian,
  • Like
Reactions: Vaponly
ogcook

ogcook

Well-Known Member
So, my Zob felt like getting in on the action.... Did a dab this way too. :science:

0cSnfCT.jpg
 
S

sve

Well-Known Member
Well, just found out my enano is sitting at my PO Box, extremely fast shipping, can't wait to use it today!

Edit: Oh No! it was received but no glass stem or anything else was included. I am sure Andy will make it right but I am bummed i cant use it this weekend :/
 
sve,
  • Like
Reactions: ogcook
ACE OF VAPE

ACE OF VAPE

Vape outside the box
Manufacturer
sve said:
Well, just found out my enano is sitting at my PO Box, extremely fast shipping, can't wait to use it today!

Edit: Oh No! it was received but no glass stem or anything else was included. I am sure Andy will make it right but I am bummed i cant use it this weekend :/
Click to expand...
I made some shipping errors this week. Sorry. OF course I'll make them right. Email me.
 
ataxian

ataxian

PALE BLUE DOT
ACE OF VAPE said:
I made some shipping errors this week. Sorry. OF course I'll make them right. Email me.
Click to expand...
I hope he is getting the GonG adapter?
My water set ups are Kicking My Shiny Metal A@@!
I haven't used this thing for more than a few days however I must say SIMPLE & EFFECT!

CHEAP and a no BRAINER!

The FLAVOR is really good.

LEVEL 8 was too harsh for me.
LEVEL 7 is were I'm currently at. (very powerful however smooth)
LEVEL 6 I plan to experiment with GSC.
Need to do some more in depth scientific study to quantify my findings!
 
PDwasmy1st

PDwasmy1st

Well-Known Member
What material is that inside the nano not the silver bit the bronze looking bit what the gauze sits in?
 
PDwasmy1st,
A

alexwallis

Well-Known Member
Hi, I tried to email you yesterday Andy, using the address Andy@epicvape.com
I know it might take you a while to reply Andy because of my specific questions, can you please just confirm if you got my message? I wasn't sure if I should keep that a in the email address listed on the front of the thread upper case. I look forward to getting your reply in due course.
 
alexwallis,
VaporBaked

VaporBaked

Member
alexwallis said:
Hi, I tried to email you yesterday Andy, using the address Andy@epicvape.com
I know it might take you a while to reply Andy because of my specific questions, can you please just confirm if you got my message? I wasn't sure if I should keep that a in the email address listed on the front of the thread upper case. I look forward to getting your reply in due course.
Click to expand...
Dude relax yesterday was sunday.
 
A

alexwallis

Well-Known Member
Hi, I know, I just was unsure, as its quite rare to use upper case in email addresses, but I am patient and quite chilled just wasn't sure if I got the email right.
 
alexwallis,
  • Like
Reactions: ataxian
A

alexwallis

Well-Known Member
Hi, I am very tempted to order, as the vast majority of the posts are positive.
Andy has replied to me, and I have got back to him with just a few more questions.
I guess now I need to decide on the wood to go for, so I am throwing this one out to owners of this vaporizer, I know that Cherry, Walnut and Maple are offered as standard.
So, my question is do the different woods affect the running temperatures? I like the idea of having as broad a range of possible temperatures as possible.
I already own a Purple-days so know about walnut, and I remember there was always allot of discussion on that thread about different woods and what difference they made to temperature.
Any feedback from existing owners would be very welcome.
 
alexwallis,
z9

z9

Well-Known Member
There is no difference in the performance between woods with the E Nano because of the large steel insert. The wood is more of an insulating "shell" on this vape.

I vastly prefer the maple to the other types of wood but its just preference. I have a maple and walnut unit.
 
z9,
A

alexwallis

Well-Known Member
Hi, What makes you prefer the Maple over the other woods?
Also, although you say the wood makes no difference to temperature, if as you say it acts as an insulating shell surely it helps the vaporizer to maintain temperature. surely that means that different densities of wood have different insulating properties. Not that I am a wood expert or anything.

z9 said:
There is no difference in the performance between woods with the E Nano because of the large steel insert. The wood is more of an insulating "shell" on this vape.

I vastly prefer the maple to the other types of wood but its just preference. I have a maple and walnut unit.
Click to expand...
 
alexwallis,
z9

z9

Well-Known Member
I should have been more clear. Andy, who makes them has said that the E Nano doesn't care what type of wood its paired with. The wood more or less keeps the steel insert from burning you, the E Nano is different from other vapes in this aspect. This type of heating element puts out so much heat that it doesn't need to be heavily insulated to maintain high temperatures like traditional logs that utilize a resistor for heat. The metal barrier between the airpath and wood negates some of the effect that the wood would have on the vapes performance. There MIGHT be a negligible difference between the woods, nobody has noticed anything yet from what I've seen/read and personally experienced.

I just like the look of maple, there is no difference between my two maple and walnut nano.
 
z9,
A

alexwallis

Well-Known Member
OK that's clear, thanks.
One last question regarding wood types, is one wood heavier than another? so is maple heavier than walnut etc?
z9 said:
I should have been more clear. Andy, who makes them has said that the E Nano doesn't care what type of wood its paired with. The wood more or less keeps the steel insert from burning you, the E Nano is different from other vales in this aspect. This type of heating element puts out so much heat that it doesn't need to be heavily insulated to maintain high temperatures like traditional logs that utilize a resistor for heat. The metal barrier between the airpath and wood negates some of the effect that the wood would have on the vapes performance. There MIGHT be a negligible difference between the woods, nobody has commented on it yet.

I just like the look of maple, there is no difference between my two maple and walnut nano.
Click to expand...
 
alexwallis,
lazylathe

lazylathe

Almost there...
The one thing that really stands out for me with this vape is it's ability to keep up with some of my friends!!
They pull on it like a tightly packed joint and it keeps up and produces amazing vapor clouds!
Most of them end up coughing up a lung!!
It is quite comical to watch...

Then they watch me do the same thing only slower and match their clouds with ease and no spluttering!!

Truly an all rounder vape that everyone should own!
 
A

alexwallis

Well-Known Member
Hi,
Does anyone know if the wooden mouth piece listed on the accessories page of epicvape.com for $6.95 is for the nano or the f2? the page doesn't actually seem to say.
Also, is it a complete stem or just a mouth piece that is to be fitted over an existing glass stem?
 
alexwallis,
z9

z9

Well-Known Member
alexwallis said:
Hi,
Does anyone know if the wooden mouth piece listed on the accessories page of epicvape.com for $6.95 is for the nano or the f2? the page doesn't actually seem to say.
Also, is it a complete stem or just a mouth piece that is to be fitted over an existing glass stem?
Click to expand...


Its for the EV-2, look for the same mouthpiece in the complete whip kit for the EV-2
 
z9,
You must log in or register to reply here.
Top Bottom