TheDudeNextDoor
Abiding
Check out these Bent Glass bubblers. I recently picked up the Grid C5-B50 (page 4), which pairs really nicely with my E-Nano.
http://www.smokersgalleryonline.com/brands/Bent-Glass.html
E-Nano from Epickai
Check out these Bent Glass bubblers. I recently picked up the Grid C5-B50 (page 4), which pairs really nicely with my E-Nano.
http://www.smokersgalleryonline.com/brands/Bent-Glass.html
The price now for a standard in stock Nano is $175 which is what the price was with the FCLOVE discount. Now the FCLOVE discount gives you free shipping and an all glass stem upgrade.
Andy
PDwasmy1st
Well-Known Member
Another great product from epicvape 
quality build , great customer service , fast delivery times
quality build , great customer service , fast delivery times 
ataxian
PALE BLUE DOT
How long does it take to get one?Another great product from epicvape
Sometimes it does, sometimes it doesn't I have no idea why. Should ship by Friday.
Stock Nanos ship in 1-2 days. Custom ones take a week right now.
Andy
Nice to know! I just ordered one as well, i am happily surprised the stock versions are shipping so soon. Can't wait to try it out.
I didn't even realize the upgrade part of this, glad I used the coupon!
ataxian
PALE BLUE DOT
Sorry Andy to sound impatient!
I have good equipment I just wanted to see what all the fuss is about?
No hurry!
Kind regards,
ataxian
PDwasmy1st
Well-Known Member
The plus sides are also:
The adjustable heat, increase to start with to speed things up then drop it down 1-2 notches, & you can turn it off there instead of the mains, which makes things easier.
Having a fast start up time , means not having to leave on all day, therefore surely increases longevity.
The straight draw tube is easier to clean without having to use iso.
The straight to mains , so no dodgy Chinese adaptors that go wrong a lot.
The adjustable heat, increase to start with to speed things up then drop it down 1-2 notches, & you can turn it off there instead of the mains, which makes things easier.
Having a fast start up time , means not having to leave on all day, therefore surely increases longevity.
The straight draw tube is easier to clean without having to use iso.
The straight to mains , so no dodgy Chinese adaptors that go wrong a lot.
ataxian
PALE BLUE DOT
OK Stop already!
These are the things I was looking for!
Now I'm getting impatient!
Is it tho?
Well-Known Member
Pd forgot to mention the enano's ability to extract huge clouds from very small amounts of greenery, the loverly taste, the awesome way it fills my glass bongs with big milky hits, the quality workmanship, I could go on but you'll know soon enough
ataxian
PALE BLUE DOT
Thank you for putting more wood on the fire!
Nice to have a local using an EPICVAPE. Should ship today. Andy
I guess Andy is a Firefighter!
This week NANO Action!
OK I Get it EPIC VAPES exceeds expectations.
Need to fire this baby up!
EXPERT NANO users please help rookie figure this out?
I am preheating at level 8.
I plan on some GIRL SCOUT COOKIES through a water path.
I have the GonG adapter.
Plus my Macro Lens and Tri-Pod arrived at the same time!
It's only Wednesday and I'm having a good week!
What level do I start out with?
My SOLO level 4 normally.
Alan must of hand selected the wood?
It is Curly Maple!
So Beautiful!
Let's test this sucker out!
Enchantre
Oil Painter
For a fast start, turn the dial all the way up (it says "11", but really only goes up to about 9)*, leave it for about two minutes, then turn down to about 6. Wait one more minute (load your stem/Gong) Try it there. Adjust to suit personal taste.
I find that draw speed plays a role, too. I leave mine at about 7 most of the time, and I'll draw faster for cooler hits, then later I'll draw really slow, and almost toast the herb.
I think you'll enjoy your E-Nano.
I find that draw speed plays a role, too. I leave mine at about 7 most of the time, and I'll draw faster for cooler hits, then later I'll draw really slow, and almost toast the herb.
I think you'll enjoy your E-Nano.
TheDudeNextDoor
Abiding
Anybody got any tips on how to use the GonG without searing your fingers? I love the screenless GonG, but after my draw, I have to pull the GonG to clear the bubbler, and that glass gets hot. I kind of wish it had a little glass handle on it like some bowls I've seen. Surely I am not the only one who has had this problem. Has it been discussed before?
shredhead
Specialist
Um, don't pull the Gong. You just pull off the Nano. I leave my Gong on my bubbler all the time. Usually with something in it.
This doesn't work with a lot of stemless pieces tho, due to blow back. Personally I use silicone mostly, but that's just me!
TheDudeNextDoor
Abiding
Yep, shredhead called it. I have to pull the GonG to clear the bubbler. Just removing the Nano doesn't do it.
shredhead
Specialist
What you could do is get some high temp silicone and put a ring around your gong bowl. That way you can have a place to grab at and it won't burn!
TheDudeNextDoor
Abiding
I tried using the Epik to remove the GonG (that u-shaped end fits the lip), but it immediately dropped and spilled all my shit. lol. Could have been a user problem, though. I may try that again. Good idea about the high-temp silicon. Anybody know where I could get that and what size works best?
Wouldn't it be cool if the GonG had a little handle like this?
Wouldn't it be cool if the GonG had a little handle like this?
ataxian
PALE BLUE DOT
I leave mine at about 7 most of the time, and I'll draw faster for cooler hits, then later I'll draw really slow, and almost toast the herb.
I think you'll enjoy your E-Nano.
First test run in the big bubbler
The second one with the SHERLOCK & PECULATOR
Level 7 is what is working so far!
Very Medicating.
I like all of my Devices has they all give various medical effects.
This NANO just medicated me to a different zone!
I need some more practice!
However works really well as far I can tell.
edit: It seems that the effects are delayed however stronger than say one of my vaporizers that gives immediate results however not as heavy as the NANO.
The size is perfect!
shredhead
Specialist
Andy does supply some. Did you not get any with your kit at all? I have silicone from my UD and a bit from Andy as well. Also I use omicron tips for a couple things jbut I'm not sure if those are high temp so I keep them away from direct heat.
On a side note:
Double edit:
Be careful with oil on cotton in your nano folks! You might get this!
TheDudeNextDoor
Abiding
If anybody needs a little piece of silicone just email me your name and address.