AEON Glass by jhanpixel

tepictoton

tepictoton

Well-Known Member
Those look really nice and portable...

Can you give us an estimate on the sizes and off course the price point?

Would it be possible to create one of the honeycomb ones with a female joint? I ask becuase I am still on the look-out for the perfect piece to go with my minivap when on the road, and those honeycomb sidecars look uber sweet, specially the one with the slyme in it.

Any chance of making them with a detachable mouthpiece(I know this will cost more, but how much more?), to make them even more portably...?
 
tepictoton,
Richy

Richy

Frequently up in space with Bowie
Due to the size of the honeycomb perc I'd say it's probably designed to be an oil rig as you might only get full use of the perc when sucking air through it very fast to give the honeycomb enough pressure to stack. That's just my impression, I am by no means an expert but I imagine that you might have to suck too hard for a portable vape to keep up to get full use of the perc.

The sizes and prices are listed on his iOffer store, including US shipping and the 10% off they are:

~$150 for the honeycomb
~$110 for the dewar showerhead

They are both 4.5 inches to the top of the can and 65mm wide with a thickness of 5mm, including the mouthpiece they are 8 inches tall.
 
Roger D

Roger D

Vapor Wizard
Really cool side cars ! I would love one of theses with some exotic twist for my collection, like that they rock but too similar to what I got.

tepictoton said:
Would it be possible to create one of the honeycomb ones with a female joint? I ask becuase I am still on the look-out for the perfect piece to go with my minivap when on the road, and those honeycomb sidecars look uber sweet, specially the one with the slyme in it.
Click to expand...

No problem, you don't need a female joint, almost all my pieces are DI, I just use a female to female adapter as a slide.

Richy said:
Due to the size of the honeycomb perc I'd say it's probably designed to be an oil rig as you might only get full use of the perc when sucking air through it very fast to give the honeycomb enough pressure to stack. That's just my impression, I am by no means an expert but I imagine that you might have to suck too hard for a portable vape to keep up to get full use of the perc.
Click to expand...

The MV has a good enough airflow, witch allows a bit of stackage, not the whole can but still nice (cf my vids) Certain percs works more than others on low air flow, you pointed something considerable
 
redglassgallery

redglassgallery

JHANPIXEL
Glass Blower
chinese till it runs out but the more complicated tekky stuff will be mostly schott just cuz i dont want the headache and breakage
 
redglassgallery,
  • Like
Reactions: JoeKickass
S

Smokin_OZS

New Member
I've been reading through FC forums for years to help me pick out big purchases and have found a lot of great advice. Last year I bought an LSV which I used with a small beaker until recently, as it unfortunately broke where the stem and base meet. I recently just received my 20" double disc perc inline from jhanpixel and I love it. It hits beautifully and very clean when smoking with my 18mm bowl, but my LSV doesn't work as well with it as my 10" beaker had due to the sheer size of the can. So first this is a suggestion to consider that when choosing your piece, but I was also wondering if anyone else has had similar issues and has found a good solution/technique for good vapor draws in large bongs. I'm thinking maybe if I add an ashcatcher it would give somewhere for the vapor to accumulate nice and thick before I clear it, and the dewar showerhead ashcatcher jhanpixel makes looks sexy too.
 
Smokin_OZS,
Richy

Richy

Frequently up in space with Bowie
If your finding your current setup too large and you add an ashcatcher then you are effectively increasing the size of the piece so I don't think it will provide you with a very good solution. I'd recommend just getting a separate small piece to use on it's own for vapor and then just use your current setup for combustion as you said is was quite adequate for that. A lot of people find small peices are better for retaining the flavour of the vapor as well. Speaking of which adding an ashcatcher to you existing bong way wash out a lot of the flavour a leave the vapor a bit tasteless.
 
redglassgallery

redglassgallery

JHANPIXEL
Glass Blower
i think a cheap 38x4 beaker w. a 18-18 downstem will give you what you are looking for
LHS should be offering those for about $40?
 
redglassgallery,
S

Smokin_OZS

New Member
Yeah, that makes since Richy. I'm trying to stay away from another cheap beaker because of the way my last one ended up (while in the padded LSV bag), and I really like using these pieces like my new baby with beautiful percs. I guess I'm just going to have to order another smaller piece soon to vape with, most likely from Jhan when that new glass phases in :brow:

2nlZyGu.jpg
 
Smokin_OZS,
  • Like
Reactions: SSVUN~YAH
Richy

Richy

Frequently up in space with Bowie
Smokin_OZS said:
Yeah, that makes since Richy. I'm trying to stay away from another cheap beaker because of the way my last one ended up (while in the padded LSV bag), and I really like using these pieces like my new baby with beautiful percs.
Click to expand...
No worries man, I PMed you a few suggestions of smaller pieces so just check your inbox at the top of the page.
 
C

Chaosate

New Member
Hey all! I recently broke my double nine arm tree MGW tube of about five years. When this happened I immediately began the search for a replacement. Upon stumbling on Aeon Glass on ioffer i was drawn to the stemline, dual 96 hole honeycomb perc 14" tube. After looking around and much deliberation, I decided to go with my original gut. Boy am I happy I did. This thing hits, draws, and clears like a charm... not only that, but the diffusion levels are simply awesome. It makes drawing feel like nothing at all. As for the taste, it has an absolute minimal effect on it and this is coming from someone who used straight tubes up until the MGW. Anyway, the construction is solid as I already banged it against my granite counter top and it was just fine. There are a few bubbles but most of the them are confined to hard to work areas and that's cool with me. Either way, if you're looking for a cheap and nearly equal quality alternative to some of the major, popular brands I would recommend Aeon Glass (jhanpixel on ioffer.) I will be posting a milk vid and several pictures soon. Thanks for reading!
 
Chaosate,
  • Like
Reactions: ou812?
Richy

Richy

Frequently up in space with Bowie
I'm glad I convinced you not to get the other piece which was probably an import as the quality would have been much inferior compared to Jhan's work.
 
Peloton

Peloton

Vapes Hard
Just placed my order for a dewaar bubbler similar to this, but with a showerhead perc instead. So far jhanpixel has been a pleasure to communicate with. I'll be sure to share the finished product!
 
Peloton,
Thunderclees

Thunderclees

Well-Known Member
I've been using my bent neck stemline for a while now and it's been great. Totally satisfied with the purchase- I'm thinking of getting something with a female joint as well.

I just cleaned it so I figured I'd post a pic:

39578deb51f5dddc1a2c5109ffcff5d0.png
 
ou812?

ou812?

Well-Known Member
Oh god I feel it creeping in again(GAS), I havent even rec'd my other piece yet and I'm already eyeing that matrix bubb, DAMN YOU JHAN, you really know how to build em bud!!.... So many cool new designs!!!!:tup: and built with much love,as we owners of your art can tell! Keep em roll'n brother, we will buy MORE:cheers:
 
redglassgallery

redglassgallery

JHANPIXEL
Glass Blower
ou812? said:
Oh god I feel it creeping in again(GAS), I havent even rec'd my other piece yet and I'm already eyeing that matrix bubb, DAMN YOU JHAN, you really know how to build em bud!!.... So many cool new designs!!!!:tup: and built with much love,as we owners of your art can tell! Keep em roll'n brother, we will buy MORE:cheers:
Click to expand...
was that you that bought the double 8? - we are bumping your order up to a 96 hole disc

cuz we can =)
 
GSH

GSH

On a Möbius plane
ou812? said:
and I'm already eyeing that matrix bubb, DAMN YOU JHAN, you really know how to build em bud!!.... So many cool new designs!!!!
Click to expand...

Me too...that Matrix looks sick...bet it stacks like a beast!
 
GSH,
ou812?

ou812?

Well-Known Member
redglassgallery said:
was that you that bought the double 8? - we are bumping your order up to a 96 hole disc

cuz we can =)
Click to expand...
No not me Jhan, my order was a sidecar ufo showerhead bubb.Mine was delayed due to mishap,all is good, but like I said,you keep building them... We'll support your work anyday bro!! :)
 
ou812?,
ou812?

ou812?

Well-Known Member
ataxian said:
Kind of strange?

This stuff is not available to the public?
Click to expand...
I think it is, Jhan manufactures for a lot of area head shops under AEON, and doesn't apply his brand name logo to FC members and more importantly, he doesn't charge what they're retailing for.That is why I am so adamant about throwing plugs around for this guy.He does a bang up job and sells it to us at a very reasonable price,I know they sell for a lot more retail and rightfully so, but our man is good to us.I have 3 of his and counting, stellar craftsmanship and great biz man,without a doubt he has integrity. There are others here as well but I havent been able to really nail it down,I like Colies work as well, and will eventually start grabbing some of his too. 2 great guys we have here and both are thinking outside the box producing some beautiful art @ prices that IMO are excellent and dont find a whole lot of work on that level for their prices.
Im sure there are others and eventually I will discover them but for now,Im good with these 2 gents ,so keep em roll'n men....WE WILL CONTINUE TO SUPPORT YOUR WORK:leaf:
 
You must log in or register to reply here.
Top Bottom