Discontinued Wychwood Vaporizers UK Log Vape

Kian

oddball musician
shiiiit. I sent an e-mail a while ago about replacement stems, the undelivered message seemed odd. just saw all this.
I hope the guy is okay, his products were top notch!
Does anyone know if this epicvape guy is the best option for stems in England? Is there anyone closer?
 
Kian,

OhTheAgony

here for the chicks
Which stems are you looking for exactly? I don't know what stems they use, but does the Epic-vape guy even ship to Europe? I know he refused to do so when I asked him a while ago, but that was quit a long while ago so perhaps he changed his policy finally.
 
OhTheAgony,

Dafni

Well-Known Member
Which stems are you looking for exactly? I don't know what stems they use, but does the Epic-vape guy even ship to Europe? I know he refused to do so when I asked him a while ago, but that was quit a long while ago so perhaps he changed his policy finally.

Andy from Epicvape ships to europe, no problem. In my case his stuff arrived very quick and without extra fees.
 

Vitolo

Vaporist
Here's a picture that includes 4 types of the WW stems that all work REALLY well.
(the longest tube is to use with the GonG stem)
DSC02546.jpg
 

Kian

oddball musician
Here's a picture that includes 4 types of the WW stems that all work REALLY well.
(the longest tube is to use with the GonG stem)
DSC02546.jpg

and the second in from the right is the type sold via Epicvape? that's the easiest option for England?
also, I've been really liking mixing things up in the aromatherapy cup, but the copper cup we got with the Wychwoods are easily spilled and not easy to pick up when full or hot. I've seen some really nice ones a while back, maybe those that were made for the Zaps. Does anyone know where, preferably close to England, I can buy something like that? that will fit on the wychwood heater, but that widens somewhat, like a bowl, so it's harder to spill and easier to handle.
 
Kian,

Vitolo

Vaporist
Alan from Toasty Top uses copper cups, but places a ring of silicone tubing there for easy grabbing:
30hn7s0.jpg
 
Vitolo,

Dafni

Well-Known Member
Kian, I got a WW in the meantime and have to let you know that my Epicvape Enano Direct draw stem does NOT fit over the WW heater. Just a tiny bit too small.
 
Dafni,

banana_republic

Well-Known Member
Kian, I got a WW in the meantime and have to let you know that my Epicvape Enano Direct draw stem does NOT fit over the WW heater. Just a tiny bit too small.
OMG! I wish I knew that some few days ago... I ordered an E-nano GonG adapter to use with the WW, and it probably won't fit... anyone has a clue which Glass adapter (and where can we find it) should fit WW heat port?

Cheers!
 
banana_republic,

Dafni

Well-Known Member
OMG! I wish I knew that some few days ago... I ordered an E-nano GonG adapter to use with the WW, and it probably won't fit... anyone has a clue which Glass adapter (and where can we find it) should fit WW heat port?

Cheers!

take that with a grain of salt, I don't know if our WWs are exactly identical. I was told mine is a very early model.

Let's measure them heaters and glass and post back. Gimme a moment, as soon as i have time I will take the exact numbers.
 
Dafni,

Kian

oddball musician
Kian, I got a WW in the meantime and have to let you know that my Epicvape Enano Direct draw stem does NOT fit over the WW heater. Just a tiny bit too small.
thanks man, I still have a working stem but after the bowl of my other breaking I think I need a spare. I'll keep looking.
Also, thanks to Vitolo about the silicone ring! That seems very obvious and I think I may have even been told this before. I was king of thinking of something a bit bigger, but I'll keep looking or make something myself. the silicone trick will at least help for now.
 
Kian,

Dafni

Well-Known Member
FWIW, my WW port is 10mm, and the WW glassware I have ranges from 10.2mm to 10.9mm. The ENano port is 9.3mm before the ridge, and the glassware I got from Andy ranges from 9.4mm to 9.8mm.

I am terribly sorry if I gave out the info to anyone that they should fit...
 

banana_republic

Well-Known Member
BR, I believe the new GonG stem from Underdog should work for you. Both the UD and the WW use a 3/8" core, so I don't see why it wouldn't work, but I haven't personally tried it.
:peace:
Thanks bro! But, I just chacked that would not be so easy...

http://www.underdogvapes.com/about/faqs/
Q: Do you ship internationally?
A: Not at this time.

Also, 3/8" is something around 9.5mm (as I could check, but maybe found wrong conversion result...) and that would be a bit smaller than the WW heat port...

FWIW, my WW port is 10mm, and the WW glassware I have ranges from 10.2mm to 10.9mm. The ENano port is 9.3mm before the ridge, and the glassware I got from Andy ranges from 9.4mm to 9.8mm.

I am terribly sorry if I gave out the info to anyone that they should fit...

Hey, no need to sorry!! We're here to (try to, at least) help each other, let's keep on aggregating and exchanging info on the topic.... I just checked my heat port looks the same size of yours, I did not know it has changed for some WW models as someone suggested above.... If you find some GonG adapter that fits, please let us know, ok? I will do the same, and meanwhile I have some silicone tubes to use as well...

Kian, if you contact Alan, who makes the HI and the TT, I think he'll be able to help you. He makes a ton of different styles of stems.(...)

Kian, if you get in touch with Alan, please let us know if you could find out any GonG this size, ok?


Cheers!
 
banana_republic,

underdog

shade-tree vapor engineer
Manufacturer
Has anyone been in contact with Cookie during the past couple months?

I was thinking about maybe picking up another WW and also wanted to see how things had been going with him lately but haven't gotten any answers to my emails. :huh:
 
underdog,

shredhead

Specialist
Has anyone been in contact with Cookie during the past couple months?

I was thinking about maybe picking up another WW and also wanted to see how things had been going with him lately but haven't gotten any answers to my emails. :huh:

From what I gathered in earlier posts, his company was disolved in April I think it was? Someone had found a link to it somewhere. But I'm sure many still have their hopes up :)
 
shredhead,

underdog

shade-tree vapor engineer
Manufacturer
From what I gathered in earlier posts, his company was disolved in April I think it was? Someone had found a link to it somewhere. But I'm sure many still have their hopes up :)

Doh! Thanks for the heads up.

Should I assume this means no warranty support, no more accessories, etc as well?

Any idea why he dissolved things? Seemed like there was a decent demand for WWs so that's a bummer. Was everyone able to get in orders for WWs, accessories and whatnot before he closed or was there not enough warning?

Shit, guess I should just go and read the whole thread and stop pestering you for answers.. sorry. :p

Anyways, seriously bummed by this news. :ugh:
 
underdog,
  • Like
Reactions: ogcook

Stu

Maconheiro
Staff member
He hasn't been on Skype since 4/27. I don't think the business was going too well from the last conversation I had with him. Just a couple of units per month iirc.

I'm watching this new HBO series called "Family Tree". The main character reminds me sooo much of Cookie. Anyway, I hope everything is ok with him and it's just a business move.

:peace:
 

Kian

oddball musician
Kian, if you contact Alan, who makes the HI and the TT, I think he'll be able to help you. He makes a ton of different styles of stems.

He calls them roasting tubes, however. ;)
sorry to be an idiot.
I just saw this, I don't know what the HI or TT are, so I cannot figure out how to find this Alan guy.
Could you please link me up? unless anyone has figured better suggestions for stems.
Thanks.
 
Kian,

Kian

oddball musician
cool, thanks. just looking at a load of stuff on the Toasty Top site now. beautiful.
 
Kian,

Rab

Well-Known Member
I wonder if an arizer solo stem will work on a wychwood.. Anybody know? I don't really want to go to the hastle of contacting someone and writing an email but my stem is completely screwed and I had to repair it with silicone tubing
 
Rab,

farscaper

Well-Known Member
I actually found that an all silicone bowl vaped best for me. Kinda bummed wych went down. I won mine with a pumpkin just last year. I was just to the point that I was ready to buy some more stuff causr all the silicone I have left is filthy...

Thank for all the good times wych. I still got mine plugged in and using right now, dirty bowl and all.

Anyone know a good place to order medical grade tubing in small qt. Like by the foot? All I ever find seems to be 10 ft +.
 

farscaper

Well-Known Member
Will any of the UD or HI glass or accessories mate up with the wych without modification or custom work to anyone's knowledge?

Im feeling like some glass accessories and a VVPS is calling for me... its either that or new vape time... i cant tell which yet.
 
farscaper,
Top Bottom