• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Arizer Solo

OF

Well-Known Member
YES!!! 3 of the four wires were unplugged...I can just plug them back in? is there anywhere i can find pics of how it should look? Thank you so so much!!!!!!
No photos I know of but the plugs are keyed and the routing is pretty obvious.

They should not have been disturbed......you did remove the four small screw from the bottom, right? Then slide the shell up off the unit?

OF
 
OF,
So happy about the PN WT.
Makes Solo hits very smooth.
I tried to draw as hard as possible to see if I get splash back , nothing.
For me, my own Dremmel modified turbo PV GonG stem works great. Consistent easy airflow and great amount of vapor even in low temperatures and high speed drawing.


This was another more positive trial. This time half of a stem, Bubba Kush. Taste is awesome.
PN WT delivers. Planning to use it always on the go. If you were not sure about it. Check it out :)


Stay vaped my friends...


You've piqued my interest in this product, but the $130 price tag seems high. How's the quality?
 
letter never sent,

spoons

Member
No photos I know of but the plugs are keyed and the routing is pretty obvious.

They should not have been disturbed......you did remove the four small screw from the bottom, right? Then slide the shell up off the unit?


OF

if they weren't disturbed before, they are now...

KP0Zkq3.jpg


so the four wires are disconnected, two big ones on the right, and two small ones on the left, and I slid the steel core out of the base thing...do the wires just need to make contact with the bottom of the steel cylander and the bottom of the core thing?
 
spoons,

OF

Well-Known Member
if they weren't disturbed before, they are now...



so the four wires are disconnected, two big ones on the right, and two small ones on the left, and I slid the steel core out of the base thing...do the wires just need to make contact with the bottom of the steel cylander and the bottom of the core thing?

Bummer, man. I think you're SOL.

Take the four little screws out of the bottom and slide the tube up and off the works so you can see what's up.

The cement you see there (the white stuff) normally has the four wires going through it to attach to four different points inside. AFAIK the SS cup is also cemented in (and not intended to ever be removed)? The problem now is the wires were welded (I think, too hot for solder) then cemented in. I think the oven assembly is toast.

When you get the cover off and can see under the base plate where the other ends of the wires are you'll see how it's built. You'll need to unplug the two cables from the little circuit board under the part you're working on and replace the unit I think.....assuming Solo will sell you another. Normally the heater parts, including the circuit board those wires are soldered to underneath (with the connectors on it) is treated as one part. The four screws you took out are removed after the cables are unplugged and the latches on the sides never released.

Unfortunately you might end up jumping on one of the $160 specials before they go away?

OF
 

spoons

Member
Bummer, man. I think you're SOL.

Take the four little screws out of the bottom and slide the tube up and off the works so you can see what's up.

The cement you see there (the white stuff) normally has the four wires going through it to attach to four different points inside. AFAIK the SS cup is also cemented in (and not intended to ever be removed)? The problem now is the wires were welded (I think, too hot for solder) then cemented in. I think the oven assembly is toast.

When you get the cover off and can see under the base plate where the other ends of the wires are you'll see how it's built. You'll need to unplug the two cables from the little circuit board under the part you're working on and replace the unit I think.....assuming Solo will sell you another. Normally the heater parts, including the circuit board those wires are soldered to underneath (with the connectors on it) is treated as one part. The four screws you took out are removed after the cables are unplugged and the latches on the sides never released.

Unfortunately you might end up jumping on one of the $160 specials before they go away?

OF

Yeah i'm pretty certain it's toast. I tried forcing everything back to where i thought it belonged and pushing the SS cup back down and there was a big spark hah...Looks like i'll have to take advantage of that special...Thanks for helping though mate!
 
spoons,
  • Like
Reactions: OF

Detonator

Well-Known Member
So happy about the PN WT.
Makes Solo hits very smooth.
I tried to draw as hard as possible to see if I get splash back , nothing.
For me, my own Dremmel modified turbo PV GonG stem works great. Consistent easy airflow and great amount of vapor even in low temperatures and high speed drawing.


This was another more positive trial. This time half of a stem, Bubba Kush. Taste is awesome.
PN WT delivers. Planning to use it always on the go. If you were not sure about it. Check it out :)



Stay vaped my friends...
That looks like thecoolest water path ive seen for the solo, where can I get one? Link please

Edit... ok I found it pn wt is pinacle water tube very cool,,,, thanks
 
Detonator,
  • Like
Reactions: Krizzle

artist

livin'in vapooodia
Seems like i found another webshop in europe who sells stems like PV

Anyone has tried one of them already?
hi 420HazeCandyKushKush, i have purchased the little glass adapter to put the volcano balloons on my extreme q bowl, and it works fantastic, now i don't have to use the original ballon setting from arizer and the air goes right up into the ballon also much faster etc, the price was ok 15,95€ i think i remember, verdampftnochmal.de are also very good to their customers and take care with any troubles!

here is the link for the adapter: http://verdampftnochmal.de/products...-adapter/volcano-easy-valve-gong-adapter.html
 
artist,

OF

Well-Known Member
Seems like i found another webshop in europe who sells stems like PV

Anyone has tried one of them already?

Cool enough. It has the notches in the lip of the bowl, but doesn't have the grooves down the side which also contribute to the effectiveness of the modifications. Still no doubt 'a step in the right direction'?

OF
 

jds32

Well-Known Member
You've piqued my interest in this product, but the $130 price tag seems high. How's the quality?

I got mine off ebay for US$110. It's a little chuggy, but makes a huge difference for me over the dry stems. It's still a very portable unit (at least around the house) and I don't worry about knocking over the bong, glass stress from the solo balancing upside down or even somebody combusting through it when I'm not paying attention.

I use the PVHES 14mm GonG with mine.
 

Lizard King

Well-Known Member
Just wanted to say a big thanks for all the replies a few pages back about screens and cases. Does anyone else use the Vapir No.2 'top hat' screens in their Solo?
 
Lizard King,

Dreamerr

Always in a state of confusion and silliness♀
Candykush personally I wouldn't spend all that money without the channels. I would go for the cheaper ecig solution till I could get the right stems. There is really not much difference between the cheap solution and a proper hes stem except some of us, me like the feel of glass better.
 
Dreamerr,

Fogoff

Well-Known Member
I got mine off ebay for US$110. It's a little chuggy, but makes a huge difference for me over the dry stems. It's still a very portable unit (at least around the house) and I don't worry about knocking over the bong, glass stress from the solo balancing upside down or even somebody combusting through it when I'm not paying attention.

I use the PVHES 14mm GonG with mine.
Hi there! Zangano you convinced me!
I bought a PN WT for my solo at vaporizor for 99$!

Besides, can someone tell me of the Ed wood's stem are still available somewhere?
 
Fogoff,

Pipes

Addicted DIY Enthusiast
Accessory Maker
Received my Solo today. Wow, under 24 hour shipping.
Now before I break it right off the bat. The stems are so tight of fit I'm afraid to push any harder.
Unit is on the charger now and hoping it just needs to be heated for the first insertion? (I hear the snicker Dreamerr) Any tips?
Can't believe the shipping speed. :tup:
 

Tweek

Well-Known Member
Received my Solo today. Wow, under 24 hour shipping.
Now before I break it right off the bat. The stems are so tight of fit I'm afraid to push any harder.
Unit is on the charger now and hoping it just needs to be heated for the first insertion? (I hear the snicker Dreamerr) Any tips?
Can't believe the shipping speed. :tup:


Just let it warm up Pipes, and the stems should wiggle in. After awhile it won't be an issue. Have fun!
 

Tweek

Well-Known Member
Cool, thanks. What I figured but so tight new and cold.


Yeah, when I first got mine I was worried about it cracking. My original stems did degrade after a short while and I upgraded to the PV stems with better airflow. But you should be golden once it warms up.
 

Krizzle

Hi Very high
Hi there! Zangano you convinced me!
I bought a PN WT for my solo at vaporizor for 99$!

Besides, can someone tell me of the Ed wood's stem are still available somewhere?

Also intrigued now by the PN WT. Have you got a link for were you got it so cheap please? I noticed your also in Europe is all :) thanks in advance and welcome to FC.
 
Krizzle,

m0sh

Singer Song Writer Stoner
LOL that is a bit too much...I mean...I did it few times but without the water tool... lol
 
m0sh,

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
^^ very impressive with the PNWT in the car, especially considering you were driving a standard. reminds me of driving around in college with a 2 foot bong one night. I can't believe we didn't get pulled over that night

You'll be impressed what happens outside the US
I've seen people riding bycicles with baby on arms. No slings no belts no anything. I know it's unsafe and risky and crazy, but people do it.
Either way, enjoy the video :)
 
Zangano Cruel,
  • Like
Reactions: bluerap00
Top Bottom