Herb Grinders
- Thread starter vtac
- Start date
-
- Tags
- herb grinders
HillaryClinton
Future ruler of earth
Just realized I need a grinder, really don't want to spend over 10 bucks, is this the legit Volcano one?
http://www.vaporexperts.com/volcano-acrylic-grinder
Heard it works pretty much as good or near as good as the expensive metal ones.
http://www.vaporexperts.com/volcano-acrylic-grinder
Heard it works pretty much as good or near as good as the expensive metal ones.
HillaryClinton
Future ruler of earth
Great thanks, should work good with the Vapor Brothers I just ordered, hopefully they arrive around the same time 
!
!
HillaryClinton
Future ruler of earth
Seems like it will work nicely for me, good to hear.
goatgobaahh
Well-Known Member
Dont waste your time with Mill grinders. I thought they looked real sweet so I picked up 2. If there is any resistance the turning part will snap (not the actual mill just the part inside which you cant replace).Both broke in four months. I had to practically pregrind with my bare hands. And I dropped $30 for each one. (sharpstone) I picked up a large SCS (easier on my hands) and I put a a turn and a half and ALWAYS have beautiful fluffy herbs.
I wish I didn't waste my $60 on terrible mill grinders.
Havelock Vetenari
Patrician
I have gotten used to the ease of a dedicated,electric(blade)coffeegrinder(a cheap one,the more expensive (mill)grinder is for my self roasted coffeebeans
).
Works like a charm and is actually much more controllable than i ever imagined.
I can get a very uniform grind with shining an little light through the top to be able to see the grind while in progress and some easily learned,measured pulses.
Albeit with the consistency from fine to really fine,so for me completely suitable for vaporising.
If you'd be wanting to grind a bit coarser for filling a joint or pipe you'd probably get it a bit too fine most of the time.
).Works like a charm and is actually much more controllable than i ever imagined.
I can get a very uniform grind with shining an little light through the top to be able to see the grind while in progress and some easily learned,measured pulses.
Albeit with the consistency from fine to really fine,so for me completely suitable for vaporising.
If you'd be wanting to grind a bit coarser for filling a joint or pipe you'd probably get it a bit too fine most of the time.
ShipDit
1%
I've been using the Space Case 2pc that Deadshort hooked me up with. About the size of a half dollar,very portable.
Teeth are sharp as hell and almost zero friction. Just a great grinder. If I had to find any fault it would be the color. My black titanium Space case shows kief a little better,and that's a trivial thing at best.
Highly recomended!
Thanks again DeadShort!!
Teeth are sharp as hell and almost zero friction. Just a great grinder. If I had to find any fault it would be the color. My black titanium Space case shows kief a little better,and that's a trivial thing at best.
Highly recomended!
Thanks again DeadShort!!
Frederick McGuire
Aggressively Loungey
I have a Ti coated SC, and a red SCS.
I haven't used my SC since I got my SCS
OF
Well-Known Member
I have a Ti coated SC, and a red SCS.
I haven't used my SC since I got my SCS
I'm a Mendo Muncher guy myself.....when I'm not using the coffee grinder, of course.
OF
clouded vision
Well-Known Member
$8 eBay special 4 piece grinder and it works like a charm. Of course my buddy got the same one and knocked a tooth off in like 3 months
That's what's up. I sold my 1st mendo to get a bigger one w/out kief screen, that got stolen and i'm using a 2.5" doublethick now. Tears through weed like crazy. I have used a lot of my friends space cases but never got the hype. Mendo remains my favorite to date.
Nothing like pulling the stem off, smashing the whole nugget with some of the stem left in there, and effortlessly ending up with a nice fluff
olivianewtonjohn
Well-Known Member
After using the miniature Santa Cruz Shredder all winter, I have decided I need another. Found an auction on eBay with no reserve. Long story short, picked myself up a medium 4pc Santa Cruz Shredder for 35$ shipped.
Headshops around me would be charging 80+ dollars for this grinder. I'd say a good deal on this particular grinder would be somewhere in the 60$ range, so I feel very fortunate.
Fluff that shit up my Santa Cruz wonder!
Best Grinder, by far. Re-engineered, re-imagined...... a superior product is born.
Headshops around me would be charging 80+ dollars for this grinder. I'd say a good deal on this particular grinder would be somewhere in the 60$ range, so I feel very fortunate.
Fluff that shit up my Santa Cruz wonder!
Best Grinder, by far. Re-engineered, re-imagined...... a superior product is born.
Vaponly
What, Me Worry?
Has anyone tried out the Mendo Mulcher 4 piece vape grinder?
Currently using a Santa Cruz 4 piece, but I have to turn it upside-down to get my material to a vaporizer friendly consistency. Would I be able to get just as fine of a grind with the mendo while using it right side up since it is supposed to be a vape-grinder?
Currently using a Santa Cruz 4 piece, but I have to turn it upside-down to get my material to a vaporizer friendly consistency. Would I be able to get just as fine of a grind with the mendo while using it right side up since it is supposed to be a vape-grinder?
b0
Cloudy...
toros23
Well-Known Member
+1
Also love my SC Shredders, they really do fluff that shit up! The designer owns a LHS in San Jose and really believes in his product. I cannot believe the kief I get from these guys and the grind is perfect every time.
Pickz
Vapes on vapes on vapes!
Oh boy I've done it now. Another impulse buy. I have a SC two piece, but I've read so much good stuff about the SCS that I couldn't resist. Was looking on eBay and nothing looked like a great deal, so I went on their website and saw this.
Pulled the trigger almost instantly haha. I have a pollen box so the 2 piece is no problem with me, I have come to prefer it actually. Can't wait. Now I have to stop buying things!
Pulled the trigger almost instantly haha. I have a pollen box so the 2 piece is no problem with me, I have come to prefer it actually. Can't wait. Now I have to stop buying things!
ShipDit
1%
Good find Pickz!
I hate to tell you this but you're not going to be able to stop buying things for your Vape needs. It's a sickness that has no known cure. Trying to fight the urge will cause night-sweats,day-sweats and eventually herpes. Welcome to the club man,you're in for quite a ride!
I hate to tell you this but you're not going to be able to stop buying things for your Vape needs. It's a sickness that has no known cure. Trying to fight the urge will cause night-sweats,day-sweats and eventually herpes. Welcome to the club man,you're in for quite a ride!
ShipDit
1%
That's the spirit! And to tell the truth this pastime is actualy pretty cheap compared to a hard drug habit.
I mean what's a few dollars more when talking about your health,not to mention all the fun Vaping provides!
If it does get to spendy just send me all your weed and weed-related equipment,that way you won't be tempted. Ahh,who are we kidding,you're not gonna stop,so put the spurs to that Vape and enjoy all that marijuana offers.
I mean what's a few dollars more when talking about your health,not to mention all the fun Vaping provides!
If it does get to spendy just send me all your weed and weed-related equipment,that way you won't be tempted. Ahh,who are we kidding,you're not gonna stop,so put the spurs to that Vape and enjoy all that marijuana offers.
Jeremiah239
Unknown Member
Ok so I just got my purple large 4pc SCS in the mail today and I must say I'm impressed!
The quality of this thing is top notch, the anodizing seams way thicker and almost seams imposable to scratch compared to my small 4pc Ti SC. But I do think that the SC grinds my product just a little bit finer, but all I do is turn the SCS upside down for the first couple turns then flip it and finish off the grind right side up.
Also I must say these pictures do NOT do the color justice, this this looks absolutely stunning in person!
The quality of this thing is top notch, the anodizing seams way thicker and almost seams imposable to scratch compared to my small 4pc Ti SC. But I do think that the SC grinds my product just a little bit finer, but all I do is turn the SCS upside down for the first couple turns then flip it and finish off the grind right side up.
Also I must say these pictures do NOT do the color justice, this this looks absolutely stunning in person!