I want to try the silicon, It makes a more airtight seal i bet,
therefore probably fatter milkier hits?
E-Nano from Epickai
I want to try the silicon, It makes a more airtight seal i bet,
therefore probably fatter milkier hits?
lazylathe
Almost there...
shredhead
Specialist
lazylathe
Almost there...
What i have just done is cut about an inch of the E-Nano supplied tubing
and slip that over the end of the glass mesh stem.
It seals it nice and tight around the external shroud of the heater.
When you draw you can actually hear the air being brought up from the very bottom of the heater.
So technically it is still GonG...
Works very well with a little Killing Fields!!!
Nice and toasty and medicated for now!
and slip that over the end of the glass mesh stem.
It seals it nice and tight around the external shroud of the heater.
When you draw you can actually hear the air being brought up from the very bottom of the heater.
So technically it is still GonG...
Works very well with a little Killing Fields!!!
Nice and toasty and medicated for now!
kingofnull
ace
Anyone vaping stems yet?
shredhead
Specialist
I'm Vaping something!
z9
Well-Known Member
I had to watch that video twice to take in the fact that you just used the adapter like a straw 
My E Nano landed today! I would like to thank Andy for packaging my vape so well and the USPS for not canceling Saturday deliveries, they made my day. The walnut looks great, but mine didn't come with a logo. I'm like 99% sure I didn't check the box when I ordered, but I could really care less about that. I didn't realize how small this vape was going to be, it made me like it even more. The plastic around the dial seems to be a little brittle, other than that it seems like a solid vape.
The stem and waterpipe adapter are nice, I told myself that I'd use the stem first but I couldn't resist the lure of the GonG adapter. I only have direct inject pieces and no female to female adapter so I improvised. I had some vinyl tubing laying around that I boiled and cut about 1/2 inch off. The male pieces fit snugly together in the tube and the airpath isn't exposed to the tubing because the joints sit flush. It'll work until I break down and buy an adapter; I've seen female Solo stems, we need some for logs. I just pull the E Nano and leave the adapter on, it clears good. I've only used the GonG but the flavor is great and it hits so smooth, need to use the stock stem though. I loaded up even less than I would normally use in the NO2 and was toasted. Definitely worth the wait!
My E Nano landed today! I would like to thank Andy for packaging my vape so well and the USPS for not canceling Saturday deliveries, they made my day. The walnut looks great, but mine didn't come with a logo. I'm like 99% sure I didn't check the box when I ordered, but I could really care less about that. I didn't realize how small this vape was going to be, it made me like it even more. The plastic around the dial seems to be a little brittle, other than that it seems like a solid vape.
The stem and waterpipe adapter are nice, I told myself that I'd use the stem first but I couldn't resist the lure of the GonG adapter. I only have direct inject pieces and no female to female adapter so I improvised. I had some vinyl tubing laying around that I boiled and cut about 1/2 inch off. The male pieces fit snugly together in the tube and the airpath isn't exposed to the tubing because the joints sit flush. It'll work until I break down and buy an adapter; I've seen female Solo stems, we need some for logs. I just pull the E Nano and leave the adapter on, it clears good. I've only used the GonG but the flavor is great and it hits so smooth, need to use the stock stem though. I loaded up even less than I would normally use in the NO2 and was toasted. Definitely worth the wait!
nkotb
Well-Known Member
Just wanted to bump this, because I'm noticing the same thing. My screen seems to be fitting just fine now.
kingofnull
ace
I find the best way to get the screens 'stuck' is to vape a stem and let the ABV cool/'harden' in the stem. The screen usually fits pretty well after scraping out the ABV.Just wanted to bump this, because I'm noticing the same thing. My screen seems to be fitting just fine now.
nkotb
Well-Known Member
I've tried to be very careful with my nano when handling it, and I store it in a plush bag inside of a roomy wooden compartment. I just took a look at my dial, and the plastic around it has already cracked.
I don't know how it happened, but it's there. I don't think it will affect functionality, but I'd suggest being extra-careful (since " very careful" wasn't enough, lol) with the plastic around the dial.
shredhead
Specialist
I had a previous post about my dial being completely cracked up. I just electrical taped it up and it's been just fine! So I wouldn't worry about it.I've tried to be very careful with my nano when handling it, and I store it in a plush bag inside of a roomy wooden compartment. I just took a look at my dial, and the plastic around it has already cracked.
I don't know how it happened, but it's there. I don't think it will affect functionality, but I'd suggest being extra-careful (since " very careful" wasn't enough, lol) with the plastic around the dial.
I've tried to be very careful with my nano when handling it, and I store it in a plush bag inside of a roomy wooden compartment. I just took a look at my dial, and the plastic around it has already cracked.
it won't affect the performance but if it bothers you send it back and I'll replace it.
andy
nkotb
Well-Known Member
No; that's ok, but I appreciate the offer Andy!
One question I had was about the glue/plastic in front of the blue light. On one of my nanos, the glue extends beyond the little hole. Would it be a bad idea to trim this down (with a nailclipper, or something) in order to make it flush with the opening?
One question I had was about the glue/plastic in front of the blue light. On one of my nanos, the glue extends beyond the little hole. Would it be a bad idea to trim this down (with a nailclipper, or something) in order to make it flush with the opening?
It's not glue. There is no glue on any Epicvape products. It's the end of the glass bulb. You can't trim it. You can push it in VERY gently if it bothers you.No; that's ok, but I appreciate the offer Andy!
One question I had was about the glue/plastic in front of the blue light. On one of my nanos, the glue extends beyond the little hole. Would it be a bad idea to trim this down (with a nailclipper, or something) in order to make it flush with the opening?
Hey Nano gang, I'm catching up on this thread and I gotta say it's been a very interesting read.
All those raving reviews and Andys quick and friendly email replies made me confident enough to place an order for an E-Nano.
Now I'm very excited to try it and I can't wait to get it.
Keep the pictures and videos coming, guys.
cheers to all
Daf
All those raving reviews and Andys quick and friendly email replies made me confident enough to place an order for an E-Nano.
Now I'm very excited to try it and I can't wait to get it.
Keep the pictures and videos coming, guys.
cheers to all
Daf
Enchantre
Oil Painter
Yesterday, I finally grabbed the itty bitty scale, and weighed what I'm sticking in the stem.
I got completely, totally, fabulously stoned, on .04 gram of Chocolate Chunk
That was probably 5 or 6 serious hits (at one point, I discovered myself watching the vapor flowing through the stem, fascinated at the sight... until I realized that I was like an overfilled balloon!), with great vapor, over about 6 hours of complete relaxation.
Plus, being able to just wander over to the table, greet the dragon, set the stem back down and wander away, is just wonderful.
Less is more. When I overstuff the stem (about .1 gram), it seems to vape unevenly, and doesn't seem to hit as hard. I also have tried little whole buds, and a finer grind, but I get the best results from a nice light shredding in the SCS. I drop it in, and gently tap the end of the stem on the counter (on a cloth) to settle it. That's it.
I got completely, totally, fabulously stoned, on .04 gram of Chocolate Chunk
That was probably 5 or 6 serious hits (at one point, I discovered myself watching the vapor flowing through the stem, fascinated at the sight... until I realized that I was like an overfilled balloon!), with great vapor, over about 6 hours of complete relaxation.
Plus, being able to just wander over to the table, greet the dragon, set the stem back down and wander away, is just wonderful.
Less is more. When I overstuff the stem (about .1 gram), it seems to vape unevenly, and doesn't seem to hit as hard. I also have tried little whole buds, and a finer grind, but I get the best results from a nice light shredding in the SCS. I drop it in, and gently tap the end of the stem on the counter (on a cloth) to settle it. That's it.
z9
Well-Known Member
^^^ I want to see this chocolate chunk you've been talking about so much.
I'm still experimenting with my E Nano but I can safely say that I love it. Everyone who's tried it approves of the vape, nobody's had anything bad to say yet and I beg people to pick it apart.
My standard gong cooks the buds in the center more than the outside, the pinch to hold the screen causes the airflow to be directed towards the center. Ripping the nano on the bong probably doesn't help either, its just so much fun taking huge hits. I still haven't gotten around to using the wand so I can't compare. But it definitely works better with a less bud. I've been using my NO2 scoop to measure my loads.
I'm still experimenting with my E Nano but I can safely say that I love it. Everyone who's tried it approves of the vape, nobody's had anything bad to say yet and I beg people to pick it apart.
My standard gong cooks the buds in the center more than the outside, the pinch to hold the screen causes the airflow to be directed towards the center. Ripping the nano on the bong probably doesn't help either, its just so much fun taking huge hits. I still haven't gotten around to using the wand so I can't compare. But it definitely works better with a less bud. I've been using my NO2 scoop to measure my loads.
EveryDayAmnesiac
Well-Known Member
This was me last night while using my Nano:
Except I wouldn't be caught dead with that haircut.
Sort of like the outfit though.
Have seen my nightly usage (as opposed to my daily usage) cut down by about 25% compared to the former Da Buddha nights. Plus... no smelly whip to clean! Still lovin' that.
Except I wouldn't be caught dead with that haircut.
Sort of like the outfit though.
Have seen my nightly usage (as opposed to my daily usage) cut down by about 25% compared to the former Da Buddha nights. Plus... no smelly whip to clean! Still lovin' that.
kingofnull
ace
Enchantre
Oil Painter
While I have ordered (and received) the GonG, I still haven't even bothered to try it with a water piece... the hits I'm getting using the stem are incredible enough!
Though, I am still shopping for the perfect bubbler for it...