Discontinued VapeXhale Cloud
- Thread starter stonemonkey55
- Start date
-
- Tags
- water filtered
stickstones
Vapor concierge
I'm going back to a 1/3 pack tonight. I'm certain I'll use half the herb and still feel fine.
Roger D
Vapor Wizard
Getting pretty tired of these loose ELB caps falling off mid-draw. Maybe the only downfall to not owning a Hydratube and having to invert the Cloud.
What a turnoff ! The same kind of thing happened to me with the LSV 1st time I used it
I know what you guys mean about using .1 and getting over blasted
I invert my Cloud from time to time and have never had a cap fall. They are significantly more loose after cleaning though. Perhaps you may need to "dirty" the cap a little to prevent this.
stickstones
Vapor concierge
I've had mine fall a couple of times...sucks. usually happens when I am lifting the Cloud off and drag the edge of the metal against the lip of the Ion's joint.
That has never happened to me - but I imagine that would become extremely frustrating.
Another thing I like about the cloud - even after there's no visible vapor, usually after 5 - 8 hits I still get a few cough inducing hits. How long does everyone else continue to pull on your cloud, essentially when is your bowl spent?
Another thing I like about the cloud - even after there's no visible vapor, usually after 5 - 8 hits I still get a few cough inducing hits. How long does everyone else continue to pull on your cloud, essentially when is your bowl spent?
SD_haze
Well-Known Member
My cheap green will cache pretty quickly but if I'm using topshelf dank it just keeps on going, and going, and going. (Assuming middleground heat setting and not-large hydratube rips)
b0
Cloudy...
That really surprised me, how what seems to be a whispy shot can full your lungs and surprise you. I love how this thing extracts my meds. I had my Cloud only for 2 days and still testing it
but I already love this vape 
Ok, so - how stoned can the cloud get me? Let me tell ya....
I was playing a new game on the xbox called Injustice - its a superhero fighting game. I was totally kicking ass too....
Until I realized I was watching the wrong character on the screen - in essence I was watching myself get my ass kicked and cheering on as if I was winning!
Are we all seeing the fucking problem here? Hello mvapes - is no one home?
DON'T USE THE CLOUD BEFORE VIDEO GAMES IF YOU INTEND ON WINNING!
I was playing a new game on the xbox called Injustice - its a superhero fighting game. I was totally kicking ass too....
Until I realized I was watching the wrong character on the screen - in essence I was watching myself get my ass kicked and cheering on as if I was winning!
Are we all seeing the fucking problem here? Hello mvapes - is no one home?
DON'T USE THE CLOUD BEFORE VIDEO GAMES IF YOU INTEND ON WINNING!
IAmKrazy2
Darth Vapor
What a turnoff ! The same kind of thing happened to me with the LSV 1st time I used it
I know what you guys mean about using .1 and getting over blasted
this is certainly a pain in the ass, and it has happened to me several times. i used to have a similar "screen flipping" issue on my LSV and VHW, typically when stirring a load (something i did multiple times per use with those devices). but i have also forgot to put on my cap on the Cloud ELB, another way this can happen. stretching out your screen with back of a pen or something could help.
Pappy
shmaporist
If ELB doesn't fit right pinch to proper shape.
dopefiend
Well-Known Member
I was just thinking about this yesterday- how on earth does one clean the bamboo? Mine is pretty clean but after 4/20 it'll probably need a good going-over!
lreindl
Pacific NW
I was thinking about taking a Q-tip dipped in ISO to the visible areas of the bamboo. Any objections?
t-dub
Vapor Sloth
Just let the bamboo cool first. An old post on the subject . . .
To keep the upper portion of the bamboo clean I use alcohol prep pads and my trusty Skilletools HoneyBun (use whatever tool you like). Use the HoneyBun/prep pad combo to gently ream out the bamboo. slowly increase pressure if necessary but be careful. That baked on ring can be nasty. I use the sharp end and scratch any left overs off like a dental hygienist does to your teeth. I believe Oldie used PBW to good effect as well. Preventative maintenance helps with this area. The bottom section can be cleaned the same way if it needs it.
Cleaning the middle section of the bamboo will require a stopper and a soak. I used ISO and dwell time to flush some abv dust out of there. Obviously proceed with caution and make sure the bamboo is completely free of any residues before turning your Cloud back on.
The alcohol prep pads are also good for wiping down the top and outside of the Cloud as well, handy little things to have around
Frederick McGuire
Aggressively Loungey
From what I've read, you plug one end of the bamboo, and carefully fill it with ISO (or your glass cleaner of choice).
Or you could soak a pipe cleaner in ISO and run that through the bamboo.
Make sure the bamboo it totally down to room temp before doing it, and make sure the bamboo is fully dry before turning it back on.
Having said that, I don't have a cloud (yet
) so I haven't actually cleaned a bamboo yet.Edit:
Damn, double ninja'd
b0
Cloudy...
I found something weird last night using my cloud. It seem like it has some kind of plastic betwen the outershield and the main body. You can see it inside the body:
Well, nothing strange till now, but in one of the sides is all twisted like if it was in a bad position or something:
And you can even see how it stick out in the back side of the Cloud:
I find it weird. Your clouds have this? Does it stick out? For what it is? I don't want to pull it without knowing what it is... Maybe I will have to ask VXL
Also discovered that in long sessions my cloud still gets really hot, after 40 minutes or so it's unconfrotable to keep it in your hand more than 20 oe 30 seconds. Not a big problem because I always use it in a table, but wasn't supossed that it shouldn't happen to cloud+ models?
Well, nothing strange till now, but in one of the sides is all twisted like if it was in a bad position or something:
And you can even see how it stick out in the back side of the Cloud:
I find it weird. Your clouds have this? Does it stick out? For what it is? I don't want to pull it without knowing what it is... Maybe I will have to ask VXL
Also discovered that in long sessions my cloud still gets really hot, after 40 minutes or so it's unconfrotable to keep it in your hand more than 20 oe 30 seconds. Not a big problem because I always use it in a table, but wasn't supossed that it shouldn't happen to cloud+ models?
elmomuzz
That just happened...
Today is a special day for my cloud. I received it exactly one year ago. Happy Birthday good ol' #49. 
I guess I can throw out my guarantee. Warranty officially EXPIRED! Good job vapexhale on making me a reliable unit that hopefully continues to perform for years to come.
I guess I can throw out my guarantee. Warranty officially EXPIRED! Good job vapexhale on making me a reliable unit that hopefully continues to perform for years to come.
Sinclue
OK disagree with me, I can't force you to be right
Sorry if I missed it earlier, but ezvaporizers.com if offering a 16% discount on their site...seems to work with the Cloud. For Cali residents that's no tax and free Priority Shipping too.
Can't tell if its the Plus or not, but aren't they all supposed to be Plus now?
Can't tell if its the Plus or not, but aren't they all supposed to be Plus now?
VAPORIZER22
Well-Known Member
I was looking at this deal as well and then remembered that Troi stated they would not honor warranty registrations for units purchased below MSRP. Code 420XL takes 20% off storewide right now.
Live-N-Learn
Higher, Higher, Baby...
So they wont honor the warranty, but is it a plus?
Smoke1ForMe
Well-Known Member
How do you know if the discount goes through? Does it show the price after the discount prior to entering my credit card #?