• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

E-Cigarette (not for THC use)

Vitolo

Vaporist
Vito, I didn't know you had an e-cig! I used to love mine, but I have given it up for the time being. Well, just retired my AVA, the DART is still very much in the rotation. Loved some of that 24mg juice. Coffee and ecig in the morning, mmm :)
I only vape no nic juice.
DSC01709.jpg

I have made some monsters though!
Photoon2011-09-03at13272.jpg

I made this one for oils;
I did a couple promotional vids for Ecig makers:
I now only use the pens for hash oil!
 

OF

Well-Known Member

It's the only type that will work, but you can also get it here:
http://www.tropicalvapors.com/Adapt...artomizer-Omicron-Super-Nova-Smoore_p_68.html

In either case be sure to get the slotted version or you'll end up filing your own notches......

Just fyi: standard eGo-T batteries only have a voltage of 3.3V. If you want more power get the eGo-C Twist battery with up to 4.8V

Sorta true. Current Ego Ts also have a 'bypass' mode, giving full battery voltage like you'd get from TV or D9 supplies.

Also the Twist will not go to 4.8 with low resistance carts, it runs into power limit about 4.1 Volts even if the dial is set higher. To get that feature (and it's worth considering IMO) you have to give up USB charging on board and go back to an external charger connecting down the snout. Most guys (me included) like the USB charging, not an easy feature to 'trade away'.

OF
 

exit

Well-Known Member
Got most of my "portable" setup on the way... less than $40 altogether :D

ikbnpCJ.png


edit: I read something on page 15 about mixing juice and bubble hash in a cartomizer? :uhh:... Does this actually work? Can you even get bubble hash in there with those tiny fill holes and syringes?
 
exit,
  • Like
Reactions: Vitolo

OF

Well-Known Member
edit: I read something on page 15 about mixing juice and bubble hash in a cartomizer? :uhh:... Does this actually work? Can you even get bubble hash in there with those tiny fill holes and syringes?

Not that way. It can be done, but it's lame at best compared to Omicrons. G, the fellow that owns D9 and developed the Omicron was once 'in the business' of trying to make e-cigs work for THC. When the Omicron cart started working well, he not only dropped that but published his 'trade secrets' for doing so so you and I could grow wise and save bucks:
https://www.stickyguide.com/forums/196

Many of us messed with this, you don't find any of us here singing it's praises.......there's a clue there....

"Oil and water don't mix". You've probably heard that. It seems it's true, at least here. I recommend carts made for oil, not water.

OF
 
OF,
  • Like
Reactions: exit

justcametomind

Well-Known Member
I'd like to be able to give suggestion for ecigs for my tobacco combusting friends. I did quit smoking tobacco years ago.
What are the differences between those Ego models? T, W etc. is this a good model?
can you vape those liquids with some omicron or persei? Are Ovale or other physical shop ecigs a valid alternative?
 
justcametomind,

lesvape

Queer in a high haze
I am told the bud atomizer is designed to be used for Pure golds, and that should work with any EGO advance or better.
 
lesvape,

the ob

all good in the hood.
I see no reason why any ecig device could not ultimately be used for other products. All one has to do, is have a genesis type of device, and make the appropriate concoction. When the ecig device gunks up, it is very easy to change the wick and coil.
 
the ob,

justcametomind

Well-Known Member
Got most of my "portable" setup on the way... less than $40 altogether :D

ikbnpCJ.png


edit: I read something on page 15 about mixing juice and bubble hash in a cartomizer? :uhh:... Does this actually work? Can you even get bubble hash in there with those tiny fill holes and syringes?
where did you get the stuff from?
I made this one for oils;
Hi Vito, where could I get the stuff to build such a pen?
 
justcametomind,
  • Like
Reactions: Vitolo

the ob

all good in the hood.
the issue with carto style devices is that they will potentially gunk up and kill them easily.

I have become somewhat of a ecig expert in the last couple of years (hope that did not sound douchey) and have over 100 devices.

I think the genesis style is definitely the way to go if you want to go this direction.

just my 2c though :)
 
the ob,

the ob

all good in the hood.
for anyone who partakes in ecig devices, you can ultimately use any of those for this specific hobby.

It would require mixing a oil, PG and VG (and flavoring if one desires)

They would be best used in a device which uses a SS mesh and coil setup as they can easily be dry burned or re-made.

I think this is the future of portables IMO. You have your choice of batteries, sizes and devices. Many of the new portables are using the same technology as the ecig's are…...
 
the ob,

nopartofme

Over the falls, in a barrel
I have been doing extensive testing on the VIP (Vapor Inhalation Pen) from 7th Floor.
They are developing a "ceramic honeycomb disc" that will slide in onto the heater, before inserting the well ground herbal matter.
So far this is an EXCELLENT oil tool, and I am pretty impressed with where it is going with herbs~
http://silversurfervap.com/vip/vapor-inhalation-pen.html
Cool to hear you've been testing it! In case you didn't know, there is a thread going for this device over here in the Portable Thread Candidates section. I'm sure plenty over there would love to hear what you have to say.
Thanks as always for sharing your impressions, I always enjoy hearing news and insight from the vapor trail…
 
nopartofme,
  • Like
Reactions: hansdampf

hansdampf

Member
I have been doing extensive testing on the VIP (Vapor Inhalation Pen) from 7th Floor.
They are developing a "ceramic honeycomb disc" that will slide in onto the heater, before inserting the well ground herbal matter.
So far this is an EXCELLENT oil tool, and I am pretty impressed with where it is going with herbs~
http://silversurfervap.com/vip/vapor-inhalation-pen.html

thats sound awsome..saw you had the hercules also? whats the difference between the two's of making clouds/taste?

thanks for sharing..
 
hansdampf,

Vitolo

Vaporist
The hercules takes a shake between each hit, and is good to go....
Lots of fun too.
So far the unit I am working with does not require a shake, and works well but different disc are being tested for passage of heated air.
 

spanner

Well-Known Member
The VIP is the same as the atmos raw but with a battery indicates. They are really cheap to buy from china I would not advise anyone to pay $119 for it as it is junk. Have a look at ail baba and you will see the exact same device. With regard to the honeycomb disk for herbs this would probably be the same thing offered by atmos raw- it does not work. These are all just rebranded junk devices I have tested 3 on behalf of an importer all the same none worked for herb
 
spanner,

Vitolo

Vaporist
As you wish, spanner.
I am testing and have been for over a week.
My Atmos Raw was given away free a week after I got it.
(my sonic cone came directly from the maker in China.. and went in the trash)
I am still using this VIP, and enjoying it.
I am having moderate success with herbs, but still have a few types of honeycomb discs to test.
Watch for my video on the VIP thread, and you will see how well it has been working for me!
(the proof is in the pudding. I have not finished the vid due to my levels of medication while testing)
Agreed the Atmos was garbage~
We should likely get back to ejuice/ecig talk in this thread, however.
 

spanner

Well-Known Member
No offence Meant. I just jumped to the same conclusions as everyone else on the VIP thread (which I have now read). The suggestion is that this new device has some modifications and if so that is great. I hope it works for herbs and look forward to the video.
However, if it the same as all of the other OEM s then people will be disappointed and out of pocket
 
spanner,

max

Out to lunch
spanner said:
They are really cheap to buy from china
You should keep in mind that the e-cig was invented in Beijing, by a Chinese pharmacist, years before the first one was available in the US. It makes perfect sense that nearly all e-cig components are made there.
 

Vitolo

Vaporist
And... the various makers buy a base product of the most recent innovation....
then each company attaches coils/wires/materials of their own devise/affordability/choice, and make it a product.
Because 10 atomizers come from China and have the same base pieces, does not mean that the ten are from the same maker or that they use the exact materials.
They decide on economic feasibility versus quality on an individual basis.
 

ArchVape

Princess of the Biscotti Republic
I notice that Non US ecig companies are releasing the newer lines of solid E juice/liq atomizers and carts. The state of the liq is very much close to BHO/Solid wax at room temp. I believe this is a good thing for MMJ users because we will have more choose in the near future. The only thing I hope is that they use better materials. And that will come with US gov smackdown laws, tax, regulations against Ecig companies because US gov is losing to much tax dollars in ECIG sells.

paste.jpg
 

Cornbread

Member
I just wasted my time buying a cannacig. The damn atomizer ripped apart due to the stickiness of the wax (which it isn't built for, although their bullshit Youtube reviews and their website tell you otherwise). Luckily they are processing a return/refund
 
Cornbread,

DubCRider

Well-Known Member
I just wasted my time buying a cannacig. The damn atomizer ripped apart due to the stickiness of the wax (which it isn't built for, although their bullshit Youtube reviews and their website tell you otherwise). Luckily they are processing a return/refund

That's unfortunate you went with CannaCig, hopefully your next unit of choosing will work out better for you. Say hi to Sheryl at RFMK for me!
 
DubCRider,

rabblerouser

Combustion Fucker
back to regular e-cigs... I'm a big fan of the tanks from vapor4life. The dual coil gives good rips, especially with a variable voltage setup, I usually run 4.2 volts. I'm using the omg handle, also from v4l, I'm very satisfied with how it works, it's just a little too breakable. I'd love one with a metal casing, or one with soft rubbery plastic like some of the cell phone cases to protect it.

as good or better than i got with drip tips, and you can go almost all day with heavy use without refilling.
 
rabblerouser,
Top Bottom