The Pinnacle by Vaporblunt

Slightly Medicated

(SliM) Iron Lungs
LOL, that may be true, but there are like 5 company's that produce 90% of all injection resins in the world. BASF (#1 in world, Actually made Nazi gas chambers), Dow, Bayer, Dupont and GE. So take your pick on the axis of evil there.

I would probably go GE... ;) I know what you mean when you get in to those big suppliers it is hard to not step in some muddy water.

4692679792_96593e685e.jpg
 
Slightly Medicated,

t-dub

Vapor Sloth
GE is advancing "Common Core" which is a government program designed by Van Jones and Bill Ayers to brainwash our kids in school.

Anyways, what is the deal on the polycarb? Is it the extrusion process? The design of the PonG? Is it the particular batch of polycarb? Do we know what happened?
 
t-dub,
  • Like
Reactions: 2clicker

Dreamerr

Always in a state of confusion and silliness♀
I don't agree that this is a good vape for recreational users. I think it would leaving them wanting more. I am strictly med user and don't use for recreation at all since I have zero interest in being with people or getting "high". I think it comes down to how your body reacts to high temps. I have no difference in high temps as far as it working on any of my ailments. I will experiment just for all of you and I guess my self. I hate high heat on my throat but will use water and I suppose the solo or the INH and see if it does any better on pain, which nothing has been able to break through, and anxiety which works for me on low temps. I get severe panic attacks and low works for them although according to what you all say high would work better so I will try it. Using high temp while out is hard cause you need water for high.
 

Crohnie

Crohn's Warrior
As a medical user for the last 20 years, I would like to offer a different perspective on the Pinnacle. I do not want ALL medical users to get the impression that this is not the vape for them. I have several chronic, life threatening conditions. All of them cause lack of appetite, nausea, vomiting, diarrhea, etc. Pain is seldom the issue and when it does strike, it's usually of short duration. With these symptoms, the Pinnacle medicates me nicely. The higher temps required by some medical users to extract more of the pain and anti-anxiety actives are therefore, not an issue for me. :science:

The Pinnacle may not medicate me as quickly as my UD, but it gets me there nicely. One can produce nice clouds (again, not as big as my UD) on LOW even with the regular mouthpiece and no water tool with the proper technique. THERE IS A LEARNING CURVE TO THIS VAPE. Youtube's "Darth Vaper", whose video is featured throughout this thread, has amply demonstrated the clouds the Pinnacle can produce USING PROPER TECHNIQUE on ANY temp with EITHER mouthpiece. :whip:

True, the Pinnacle isn't the speediest to warm up, but when it does, and it's vaped with good technique, it works nicely. It is NOT the "sneak a quick huge hit from a cold start on the first inhale" kind of portable. For that, others (from what I've heard) may be more satisfied with the XP. For me, the Pinnacle MORE than makes up for it with its AMAZING efficiency. I have never (including my log vape) used a vape that required so little herb for the same effect. When the XP finally gets the bugs worked out, I'll buy one. For now, I more than happy with my Pinnacle. :D

PS: Sorry if I'm starting to sound like a "fanboy." The Pinnacle has things that can be improved. I think a "Pinnacle 2" rather than a "PRO" model would be a better approach. I don't think 2 models selling at the same time will work with this vape. More on that later. :smug:
 

JoeKickass

Well-Known Member
As a recreational user turned patient turned patient/recreational user :D
I would say it's good if you aren't consuming a lot of thc (your tolerance isn't high)

That means if you're conserving (saving $) or it just doesn't take you more than 0.5g to be happy you will really like the Pinnacle, it's SMALL and made in the USA so reliable.

Lately I'm used to 0.6g with wax in the pax and it got me to feel something pretty decent so I think that says a lot. A regular user would love it!
 

jambandphan03

in flavor country
As a recreational user turned patient turned patient/recreational user :D
I would say it's good if you aren't consuming a lot of thc (your tolerance isn't high)

That means if you're conserving (saving $) or it just doesn't take you more than 0.5g to be happy you will really like the Pinnacle, it's SMALL and made in the USA so reliable.

Lately I'm used to 0.6g with wax in the pax and it got me to feel something pretty decent so I think that says a lot. A regular user would love it!

:tup: I fully agree
 
jambandphan03,

qaz!

Member
As a recreational user turned patient turned patient/recreational user :D
I would say it's good if you aren't consuming a lot of thc (your tolerance isn't high)

That means if you're conserving (saving $) or it just doesn't take you more than 0.5g to be happy you will really like the Pinnacle, it's SMALL and made in the USA so reliable.

Lately I'm used to 0.6g with wax in the pax and it got me to feel something pretty decent so I think that says a lot. A regular user would love it!


i am hoping this is this the case because i have a low tolerance and i am getting this vape. so time will tell
 

jambandphan03

in flavor country
qaz, If that is the case for you, you will love it. I felt the effects strongly and immediately, and that was on low. It was just the wrong effect for what I am using cannabis for most of the time. I do like the low temps once in a while, but they make me too edgy and anxious if I over indulge.
 
jambandphan03,
  • Like
Reactions: qaz!

Dreamerr

Always in a state of confusion and silliness♀
I am liking the vape a lot. It is not a home unit by no means although when I want to hold something smaller I do grab it. I am satisfied that I get enough meds. If I used the PN only with no other vapes in a day and I am only guessing, I would say about 14 bullets worth.
 
Dreamerr,

rufus

Active Member
this little setup is pretty damn incredible now that i've gotten used to it. it just feels so futuristic when you use it one handed and lift the water tool with your thumb. after some breaking in there's no longer that slightly noticeable taste of plastic or teflon or whatever.

i reiterate what other have said about a glass top piece, so its gong instead of pong. i know its too late now in production of course, but something to consider for the pro if it happens. with some of the complaints about cleaning the plastic and the fact that it barely stays on, it just sounds so great to imagine a nice glass top piece shaped exactly like the pong now. it would make this device perfect.

compared to my EQ.....just some thoughts.....i use the elbow technique, so even though i might have the temp turned up above 200C on the screen, that sensor is down in the unit somewhere and the load is about 2 inches above in the elbow, so i would assume the air isn't quite as hot, not sure. but compared to the pinnacle, where the device is so compact and the load near the heat source, even though the temp is limited to 2 settings under 200C its still achieving comparable extraction, perhaps more efficiently.
 

TherealVaporblunt

Well-Known Member
Manufacturer
I am going to be out of the country for a a little over a week, I appoligize in advance for delays in answering questions. Feel free to use our customer service line for questions.
 
TherealVaporblunt,

overvaped

Vapor evangelist
I am going to be out of the country for a a little over a week, I appoligize in advance for delays in answering questions. Feel free to use our customer service line for questions.

Hi,
I went to your new website for ordering a new mouthpiece...unfortunately shipping options are just Cape Verde or USA...
I'd be grateful if you could fix that, I really need a new one here.

BTW, the mouthpiece accessory reads

14.4 mm Adapter Pinnacle/Pinnacle Mouth Piece

Does it include both or I have to specify which one?

TIA.
 
overvaped,
  • Like
Reactions: bladebss

BlueCloud

Well-Known Member
this little setup is pretty damn incredible now that i've gotten used to it. it just feels so futuristic when you use it one handed and lift the water tool with your thumb. after some breaking in there's no longer that slightly noticeable taste of plastic or teflon or whatever.

That is my only complaint, besides the chip in my WT. I'm really surprised at the few that have not been happy with the performance, not something I have experienced. If anyone has and old top and tip from a T1-EVO, put it on the pong adapter. Works great, give it a try.
 

Buyola

Well-Known Member
Edit: I changed my tune. My pong adapter finally showed up and my 18mm-14mm reducer from ALT. That with my Evolver HT combined with some patients and i was able to milk it. more to come....
 
Buyola,
  • Like
Reactions: t-dub

needalift

Well-Known Member
Has anybody figured out a solution or mod to the loose mouthpiece ? Mine has come off twice in my pocket allowing it to spill. I use this as an on the go piece and only use the stock mouthpiece .
 
needalift,

Buyola

Well-Known Member
Has anybody figured out a solution or mod to the loose mouthpiece ? Mine has come off twice in my pocket allowing it to spill. I use this as an on the go piece and only use the stock mouthpiece .

Black electric tape was my answer.
 
Buyola,

stickstones

Vapor concierge
Has anybody figured out a solution or mod to the loose mouthpiece ? Mine has come off twice in my pocket allowing it to spill. I use this as an on the go piece and only use the stock mouthpiece .

That sucks. It has never happened to me, but I wondered if it would.
 
stickstones,
Top Bottom