The Pinnacle by Vaporblunt

toros23 · Mar 29, 2013

GoGlass said:
Toros, at this time have you tried to recharge the PN with your Motorola Battery ?

Yes, I did yesterday when it was probably 50% charged but not sure how long it took.

Buyola · Mar 29, 2013

So the Pinnacle was waiting for me at 3Am when I got home from work. I did an 8hr charge for my initial. I packed it and took some hits on the low setting. Taste was ok the vapor production was kinda low however. I still don't have the 14mm gong adapter, I'm hoping that will help. I ended up hitting the cloud to get we're I wanted to be. I have had two more sessions since on high level. They got me medicated. Again don't want to make a call until I have the gong with more airflow. The unit is solid in your hand. It's nice and small, the adapter should be here Monday. Happy Easter!

JoeKickass · Mar 29, 2013

If you're looking for heavy vape remember other people had luck turning it to high and letting it heat up for a few mins before hitting it (maybe longer preheat is even better?)

Buyola · Mar 29, 2013

JoeKickass said:
If you're looking for heavy vape remember other people had luck turning it to high and letting it heat up for a few mins before hitting it (maybe longer preheat is even better?)

I'll give that a try.

kanabista · Mar 29, 2013

Dreamerr said:
If someone doesn't get you the answer I will have someone go under my bed to read the charger but the peeps here won't make me do that and will look at there charge and post it...hint hint.

Hopefully someone can take a look at one of their charges and post the details.

Torso you ended up with a lot of bullets. I was going to do something like that but then figure herb dust on the bottom of the screen will not please me.

kanabista · Mar 29, 2013

I just wanted to be sure before placing an order that the charger is multi voltage like the Solo. So if Engineering or TRVB or anybody else can clarify this that would be a plus. I know on the back of most charges it usually states all the relevant info but can't find a clear pic of the back of the PN charger. I just don't want to have to purchase an additional power supply or fry the internal circuits with 240v.

toros23 · Mar 29, 2013

kanabista said:
I just wanted to be sure before placing an order that the charger is multi voltage like the Solo. So if Engineering or TRVB or anybody else can clarify this that would be a plus. I know on the back of most charges it usually states all the relevant info but can't find a clear pic of the back of the PN charger. I just don't want to have to purchase an additional power supply or fry the internal circuits with 240v.

Think you are good. Mine says Input AC 100-240V~

kanabista · Mar 29, 2013

toros23 said:
Think you are good. Mine says Input AC 100-240V~

Sweet as! Thanks Toros

much appreciated...

Medical Mark · Mar 29, 2013

toros23 said:
DO NOT use ISO on any of the clear plastic. I tested on the mouthpiece I don't use and it turned hazy on some parts.

That happened to my adaptor too now it looks like shit.

qaz! · Mar 29, 2013

toros23 said:
Yeah, 3.5mm is the right OD but I know sometimes that metal pin the middle can be too thick, so just something to be aware of. I think I am all set for now..

looks like you got everything you need, nice!
what is those caps made out of for those bullets and were did you get that tube it seems perfect

Dreamerr · Mar 29, 2013

Thanks, torso

Mark it will all be ok

Chill Dude · Mar 29, 2013

Medical Mark said:
That happened to my adaptor too now it looks like shit.

That sucks MM, I think TRVB is looking for a solution to the cleaning issue. I hope there's an alternative way to clean besides boiling the plastic pieces. For me boiling is kind of a hassle for general cleaning. I prefer just to do a quick ISO wash, but I guess that's not going to work....

TherealVaporblunt · Mar 30, 2013

Chill Dude said:
That sucks MM, I think TRVB is looking for a solution to the cleaning issue. I hope there's an alternative way to clean besides boiling the plastic pieces. For me boiling is kind of a hassle for general cleaning. I prefer just to do a quick ISO wash, but I guess that's not going to work....

I am indeed looking for the answer to that. I am out of town until next week, it's something I really need to look at in person. Engineering just asked what strength iso and didn't say anything else right? I don't understand why it would do that. We will figure something out

jambandphan03 · Mar 30, 2013

I remember back in the day, if you tried to clean one of those clear acrylic "plastic" bongs that were so popular and cheap, it would cloud it up using ISO. Not sure if that helps, but it sure brought back some memories. What about simple green soak? You couldn't reclaim, but it is good about cleaning resin. Who is willing to test that out?

t-dub · Mar 30, 2013

I'll test the Simple Green. My PonG is filthy and I have some SG lying around. Maybe TRVB can take a look at removing some of the wiggle from the PonG if it's going to change

Got my new reducer in so I'm rockin' the Devastator again . . . :ko:

Edit: Science in progress . . .

jambandphan03 · Mar 30, 2013

got my shipping notice, looks like maybe Wed. delivery. My birthday is Thurs. so that makes for good timing :party:

Dreamerr · Mar 30, 2013

Wow that is really long, did they wait for the WT to ship? Happy Birthday and have a great one.

jambandphan03 · Mar 30, 2013

I hope so, it said my complete order was shipping in the email. I'd rather get it all at once.

JoeKickass · Mar 30, 2013

t-dub said:
Science in progress . . .

Any fogging with simple green?

Crohnie · Mar 30, 2013

Could someone from Vaporblunt/Engineering tell us what material they used for the mouthpieces? If they're made of acrylic, washing them in ISO will leave behind a white residue and eventually ruin them. If the mouthpieces ARE acrylic, DO NOT WASH THEM IN ISO!

Dreamerr · Mar 30, 2013

I thought they said the stuff in the air path and to me that would include the mouth piece. Can we assume maybe it is that PES stuff that had the lower heat rating? Crohnie I sent you that PM yesterday did you get it?

Crohnie · Mar 30, 2013

Dreamerr said:
I thought they said the stuff in the air path and to me that would include the mouth piece. Can we assume maybe it is that PES stuff that had the lower heat rating? Crohnie I sent you that PM yesterday did you get it?

Yes, Dreamer. I did. Thanks...you are the man.

JoeKickass · Mar 30, 2013

That's odd, everything I'm finding about PolyEtherSulfone says no reaction/recommended for isopropyl alcohol $:\$

t-dub · Mar 30, 2013

JoeKickass said:
Any fogging with simple green?

Yep. Do NOT use Simple Green. It didn't fog the whole piece, but parts of it, and it didn't clean completely either. ALSO, I am now boiling the PonG because I can't get the smell of SG out of the piece. It seems the "material" becomes somewhat porous when subjected to chemical and now I have an inhalation hazard . . . $:\$ I have boiled it twice, with limited success, and will let you guys know if I ever get the smell out. With the recent health warnings on SG, I can't use the PonG unless I get it completely odor free. I'm going to go out on a limb and say the PonG, and the material it is made from, are not fit for purpose.

Rrose Selavy · Mar 30, 2013

so far i am loving my pn but im not happy about the cleaning issues. i like to clean my pieces often and boiling is not always convenient. hope this issue is resolved soon.

The Pinnacle by Vaporblunt

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Always in a state of confusion and silliness♀

Well-Known Member

Well-Known Member

in flavor country

Vapor Sloth

in flavor country

Always in a state of confusion and silliness♀

in flavor country

Well-Known Member

Crohn's Warrior

Always in a state of confusion and silliness♀

Crohn's Warrior

Well-Known Member

Vapor Sloth

log enthusiast