ogcook
Well-Known Member
Pretty spot on, should be in my sig but the carts I have are SR and LV Dart, SR SideLoader, SR and LV AVA.
Discontinued Thermovape Cera
- Thread starter SameOldTim
- Start date
Pretty spot on, should be in my sig but the carts I have are SR and LV Dart, SR SideLoader, SR and LV AVA.
YeeeBuddy
Well-Known Member
MmMMm just the way i like it... This is MY first vape but i have vaped before and i know how the bowl usually starts tasting towards the end and I have yet to have any hits taste like "burnt popcorn" flavor is nice all the way through...
Love my LL, havnt combusted in 6 days using nothing but cera
Love my LL, havnt combusted in 6 days using nothing but cera
coffinoff
Well-Known Member
Catching back up on the thread, this is well off topic now as I continue to wait impatiently for a shipping notice... Sagan's wife, Ann Druyan, was president of NORML, and has been on its board of directors for several years.
OF
Well-Known Member
Not well if they don't pass the foil test. In general 'Supermelts or better'.
The sure way to know is to test.
OF
JoeKickass
Well-Known Member
Thanks for taking one for the team, but imo the only thing I'd take carry on are edibles or capsules. Carry on stuff is always going to be examined and not all of us are lucky to travel to mmj states..
Ghostbusters!
OF
Well-Known Member
I don't know about there, but here the drill is to go down to the PO with your stuff printed out and they'll check for it. Usually takes a day since they have to wait for the trucks to come back. Sometimes it's on a different truck, sometimes the truck breaks down and packages don't get transferred (happened to me twice now) sometimes there's no saying it just shows up.
Anyway, the PO calls me back when they find it again. Once it went back to Florida after two weeks of being 'misplaced'......
Sorry, but it's probably not something you can sort out on the phone. OTOH it's chances of showing up on it's own in the next 24 hours or so is pretty high IMO.
Good luck. It's closer now than it's ever been before......
OF
Furianlord
Member
Ghost Busters! no but seriously call USPS see if you can pick up at your local Post Office.
EDIT: OF was quicker on the draw as usual.
Hey everyone! Im back!!
Sorry for being away so long, My mother passed away and had to spend some time with family.
Looks like there are a LOT of new goodies to look at! The illuminated switch looks great!!! The Ceramic mouthpieces look awesome! I love it, all these new mods and custom pieces, you are starting to see how modular all the sizing is
Well i have a lot to catch up on, good to be back!
Tim
Sorry for being away so long, My mother passed away and had to spend some time with family.
Looks like there are a LOT of new goodies to look at! The illuminated switch looks great!!! The Ceramic mouthpieces look awesome! I love it, all these new mods and custom pieces, you are starting to see how modular all the sizing is
Well i have a lot to catch up on, good to be back!
Tim
OF
Well-Known Member
Sincerest condolences, Brother Tim. Tough duty indeed. My thoughts and prayers continue to be with you.
Glad you're back, though.....we tried to leave all the big problems for you......
OF
You might wanna add that mud beat you too. You mind as well delete your entire post...jk
My condolences to Tim. Hope everything is as good as it can be and thoughts and prayers are with ya
iamn3ko
Well-Known Member
Just because its "Out for Delivery" doesn't mean it "Delivered" chances are it was going to go out, but the mailman didn't get to those in time and you'll have it the next day. It'll say "Delivered" when it actually delivers. Don't freak out just yet.
And welcome back Tim, once again sorry to hear about all that.
Glad you like the Ceramic mouthpieces
Hey everyone! Im back!!
Sorry for being away so long, My mother passed away and had to spend some time with family.
Looks like there are a LOT of new goodies to look at! The illuminated switch looks great!!! The Ceramic mouthpieces look awesome! I love it, all these new mods and custom pieces, you are starting to see how modular all the sizing is
Well i have a lot to catch up on, good to be back!
Tim
Sorry for your loss.
Furianlord
Member
Wow completely missed the bottom of your post sorry yeah mine is repetitive. Hmm high minds think alike?
And deeply regretful of your loss Tim. May she float on Clouds for Eternity.
nr nodes
Well-Known Member
Question for those who own the Cera and a T1:
Comments/photos above show the Cera cartridges are similar in diameter to the Ultra. I was initially thinking of removing the core/bowl from my T1, and re-tapping the metal interface to re-purpose as a Cera adapter.
Has anyone actually tried seating the cartridge like this, and is it safe to assume the Cera diameter is too large to seat into the lower/tapered inside diameter of the T1 interface? (I notice my Ultra fits into the upper diameter, but not deeper inside where it's tapered down toward the threads.) Perhaps the eventual Cera-mini might fit like this?
I don't care for the Cera power handle form factor, and would prefer to use my T1/Ultramax handle with the Cera cartridges asap.
[edit -didn't see Tim's post when adding this, very sorry to hear]
Comments/photos above show the Cera cartridges are similar in diameter to the Ultra. I was initially thinking of removing the core/bowl from my T1, and re-tapping the metal interface to re-purpose as a Cera adapter.
Has anyone actually tried seating the cartridge like this, and is it safe to assume the Cera diameter is too large to seat into the lower/tapered inside diameter of the T1 interface? (I notice my Ultra fits into the upper diameter, but not deeper inside where it's tapered down toward the threads.) Perhaps the eventual Cera-mini might fit like this?
I don't care for the Cera power handle form factor, and would prefer to use my T1/Ultramax handle with the Cera cartridges asap.
[edit -didn't see Tim's post when adding this, very sorry to hear]
Homecpwork
Member
Hey everyone! Im back!!
Sorry for being away so long, My mother passed away and had to spend some time with family.
Looks like there are a LOT of new goodies to look at! The illuminated switch looks great!!! The Ceramic mouthpieces look awesome! I love it, all these new mods and custom pieces, you are starting to see how modular all the sizing is
Well i have a lot to catch up on, good to be back!
Tim
I'm sorry to here that, Tim.
S
So sorry for your loss. Best wishes to you and yours.Hey everyone! Im back!!
Sorry for being away so long, My mother passed away and had to spend some time with family.
Looks like there are a LOT of new goodies to look at! The illuminated switch looks great!!! The Ceramic mouthpieces look awesome! I love it, all these new mods and custom pieces, you are starting to see how modular all the sizing is
Well i have a lot to catch up on, good to be back!
Tim
OF
Well-Known Member
You can't tap it out, Cera is much larger in diameter where the threads are, a new adapter piece for the T1 will have to be made (pretty simple when TV gets to it I think). Otherwise you can adapt the 510 threads from T1 to Cera (I've made several such adapters). This makes for a longer package, but is another way to get there. Hopefully TV will also make a similar unit later this year.
I guess I don't see much difference at all in the form factor, but that's you call. Battery life with Cera is going to be a lot better than with a T1 supply driving a Cera cart.
OF
Bob Loblaw
Astralnaut
ditto, i lost mine a little over a year ago, thoughts are with you and your family
Sorry to hear that dude.