TheDudeNextDoor
Abiding
Right on! Thanks mom!
Hello, this is Bluebeard from North Water Glass. Whats the thng your looking for look like? I make custom pieces and am always curious to see things I have not seen yet.
TheDudeNextDoor
Abiding
Dude, I was JUST looking at some of your glass from a post in the bubbler thread! Nice work.
Here's a vid vitolo posted some time ago of the zap bubbler so you can get a full look at it.
deadheadbill
I can see clearly now the smoke is gone...
TheDudeNextDoor
Abiding
Could be a market here Bluebeard!
placetime
Well-Known Member
Do you mean the wooden holder? That was made by Rick, the guy who made the Aromazap/Myrtlezap/CeramicRockZap log vapes. That "glassgods" guy worked with Rick to produce those bubblers and stands. If you're ineterested in making something like that, maybe you could work with the manufacturers of some other log vapes, such as Underdog Dave (http://fuckcombustion.com/threads/underdog-vaporizer.4214/ ) and/or HI Alan (http://fuckcombustion.com/threads/the-hi.4693/)? Or, if you're in Australia, I'm sure HotPod Hazy would love to meet up with you (http://fuckcombustion.com/threads/a-hot-pod.6291/)
momofthegoons
vapor accessory addict
I'm pretty sure he's talking about the ss tips. Dave doesn't use those. However, Alan, hazy and I believe J.R.R. do, don't they?
placetime
Well-Known Member
Huh? Where does the SS come in? I thought he was talking about the ZapBubbler, which is glass-only, plus the optional wooden base/holder.
I don't want to get too off-topic in this thread, but just in case Bluebeard is in Australia, Hazy's Hot Pod uses an all-glass (plus SS screen) stem/bowl that has a 14 GonG on the end (works Great stuck in an 18>14 reducer
).Edit: Oh, and of course, if you're in Europe, check with JRR about his Wychwood log (http://fuckcombustion.com/threads/wychwood-vaporizers-uk-log-vape.6379/). And, Andy of Epicvape/E-nano would be another great US woodworker/vapemaker you could check with (http://fuckcombustion.com/threads/epicvape-ev-1-ev-2.3692/ , http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/ )
treecityrnd
Active Member
This can be accomplished with an 18-18mm male-male joint and almost any hydratube with an 18mm female joint. You just need to "trap" your medication inside the joint with an elbow screen and a "normal" 7th Floor screen (very similar to the way the EV2 elbow joint is set up, all screened in).
Hydratube
18-18mm male-male joint
Elbow screens
EV2 "all screened in" 18mm joint (you don't want elbow, but similar screen placement)
momofthegoons
vapor accessory addict
Huh? Where does the SS come in? I thought he was talking about the ZapBubbler, which is glass-only, plus the optional wooden base/holder.
I don't want to get too off-topic in this thread, but just in case Bluebeard is in Australia, Hazy's Hot Pod uses an all-glass (plus SS screen) stem/bowl that has a 14 GonG on the end (works Great stuck in an 18>14 reducer
Edit: Oh, and of course, if you're in Europe, check with JRR about his Wychwood log (http://fuckcombustion.com/threads/wychwood-vaporizers-uk-log-vape.6379/). And, Andy of Epicvape/E-nano would be another great US woodworker/vapemaker you could check with (http://fuckcombustion.com/threads/epicvape-ev-1-ev-2.3692/ , http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/ )
I must be getting too high. I just went and looked at mine (which I haven't used in a while... if that's an excuse....) and you are completely correct. For some reason I remembered it being more like Clear Dome's glass stems. I had forgotten you needed to attach it with a short Gong stem and that it wasn't attached. Total brain fart. Please ignore my post above.
u bwade wunner
Well-Known Member
dudenextdoor
if you are after curves I understand,Im with you, the aromazap bubbler is beauty and a classic,
alternative is Gb direct are selling 18mm h/tubes for $100.complete with ice pinches!
Alan might make you a wong or a pong if you ask him nicely which should fit your aromazap 10mm heatport.I m not sure what size youre port is.You d need to measure it.
I can see a space for a maker here eds not doing aromazap anymore i dont think
Edit Not discrediting GBD 's work or anything, but if you were to go with the GBD tube make sure its covered under guarantee.quite a few members suffered with broken joints after their purchases of the GBD FC bubbler.it is a cheap option.I might spend a little extra and buy a vapexhale H/tube.
Personally I shyed away from using a hydratube/zapbubbler with my unit because of the weight of the tube and the possibility of dislodging the center tube sideways or loosening it due to weight of the glass piece.I drop my log into a bubbler upside down so I can support and prevent any stress to the logs center tube.
A log is for life
if you are after curves I understand,Im with you, the aromazap bubbler is beauty and a classic,
alternative is Gb direct are selling 18mm h/tubes for $100.complete with ice pinches!
Alan might make you a wong or a pong if you ask him nicely which should fit your aromazap 10mm heatport.I m not sure what size youre port is.You d need to measure it.
I can see a space for a maker here eds not doing aromazap anymore i dont think
Edit Not discrediting GBD 's work or anything, but if you were to go with the GBD tube make sure its covered under guarantee.quite a few members suffered with broken joints after their purchases of the GBD FC bubbler.it is a cheap option.I might spend a little extra and buy a vapexhale H/tube.
Personally I shyed away from using a hydratube/zapbubbler with my unit because of the weight of the tube and the possibility of dislodging the center tube sideways or loosening it due to weight of the glass piece.I drop my log into a bubbler upside down so I can support and prevent any stress to the logs center tube.
A log is for life
TheDudeNextDoor
Abiding
dudenextdoor
if you are after curves I understand,Im with you, the aromazap bubbler is beauty and a classic,
alternative is Gb direct are selling 18mm h/tubes for $100.complete with ice pinches!
Alan might make you a wong or a pong if you ask him nicely which should fit your aromazap 10mm heatport.I m not sure what size youre port is.You d need to measure it.
I can see a space for a maker here eds not doing aromazap anymore i dont think
Edit Not discrediting GBD 's work or anything, but if you were to go with the GBD tube make sure its covered under guarantee.quite a few members suffered with broken joints after their purchases of the GBD FC bubbler.it is a cheap option.I might spend a little extra and buy a vapexhale H/tube.
Personally I shyed away from using a hydratube/zapbubbler with my unit because of the weight of the tube and the possibility of dislodging the center tube sideways or loosening it due to weight of the glass piece.I drop my log into a bubbler upside down so I can support and prevent any stress to the logs center tube.
Fantastic find! You need to post that page in the "cheap bubblers" thread. Great prices for some nice looking glass.
Bluebeard: The GonG stem (that little white nylon piece with the stainless stem) is something most Zap users will already have. It just requires a 14mm female joint and the GonG stem fits right into it. Now how to make that Gong stem, that will require someone with more knowledge than I have.
u bwade wunner
Well-Known Member
TheDudeNextDoor
Abiding
So my Hildbrandt power supply unit finally crapped out on me. Been working great for a long time and then just won't power up all of a sudden. I was looking through Amazon and found several nicely priced tattoo power supplies. I found a couple that are smaller (portable even?) and that would work great for my space. Anybody have any insight into whether these two units are reasonable for this purpose? Seems like the same basic technology. I don't care about the lack of a digital readout since I pretty much leave it at 14.2 volts when I have it on. Thoughts?
http://www.amazon.com/professional-...TF8&colid=30JRD4AEFWX08&coliid=I1SZ7WP7GMGCDV
http://www.amazon.com/Turn-Tattoo-P...UTF8&colid=30JRD4AEFWX08&coliid=IGWP3Y7483JE9
http://www.amazon.com/professional-...TF8&colid=30JRD4AEFWX08&coliid=I1SZ7WP7GMGCDV
http://www.amazon.com/Turn-Tattoo-P...UTF8&colid=30JRD4AEFWX08&coliid=IGWP3Y7483JE9
OhTheAgony
here for the chicks
How will you know if it's on 14,2V for sure? Are you planning on leaving a volt meter hooked up to it at all times or glue the knob in a fixed position? Because otherwise I would recommend against it. Especially with that first one that goes up to 18 vape killing volts. Just spend a few more bucks & be safe, your vape is worth it.
link
(they are available in black & red as well as the blue one I linked)
link
(they are available in black & red as well as the blue one I linked)
TheDudeNextDoor
Abiding
Nice! I like that one even better and still a great price. Thanks man!
OhTheAgony
here for the chicks
You're welcome 
There's a metal version with an off-switch on the back as well (with ^^that one up there you need to pull the plug to turn it off), but apparently that one gets very hot so you're probably better off with the simpler version I linked you to.
Here's a little more info if you want to know more about them: link
There's a metal version with an off-switch on the back as well (with ^^that one up there you need to pull the plug to turn it off), but apparently that one gets very hot so you're probably better off with the simpler version I linked you to.
Here's a little more info if you want to know more about them: link